[Keyboard] Fixes for PloopyCo mouse and readmes (#10841)

master
Drashna Jaelre 2020-11-02 16:17:05 -08:00 committed by GitHub
parent e680af98d2
commit 38162af5a7
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 3 additions and 30 deletions

View File

@ -140,7 +140,7 @@ __attribute__((weak)) void process_mouse(report_mouse_t* mouse_report) {
if (debug_mouse) dprintf("Cons] X: %d, Y: %d\n", data.dx, data.dy);
// dprintf("Elapsed:%u, X: %f Y: %\n", i, pgm_read_byte(firmware_data+i));
process_mouse_user(mouse_report, data.dx, data.dy);
process_mouse_user(mouse_report, data.dx, -data.dy);
}
}

View File

@ -2,9 +2,8 @@
![Ploopyco Mouse](https://www.ploopy.co/uploads/1/2/7/6/127652558/s905404500980887952_p10_i19_w1414.jpeg)
It's a DIY, QMK Powered Trackball!!!!
It's a DIY, QMK Powered Mouse!!!!
Everything works. However the scroll wheel has some issues and acts very odd.
* Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/)
* Hardware Supported: ATMega32u4 8MHz(3.3v)
@ -51,27 +50,3 @@ To configure/set your own array, there are two defines to use, `PLOOPY_DPI_OPTIO
The `PLOOPY_DPI_OPTIONS` array sets the values that you want to be able to cycle through, and the order they are in. The "default" define lets the firmware know which of these options is the default and should be loaded by default.
The `DPI_CONFIG` macro will cycle through the values in the array, each time you hit it. And it stores this value in persistent memory, so it will load it the next time the device powers up.
# Programming QMK-DFU onto the PloopyCo Mouse
If you would rather have DFU on this board, you can use the QMK-DFU bootloader on the device. To do so, you want to run:
make ploopyco/trackball:default:production
Once you have that, you'll need to [ISP Flash](https://docs.qmk.fm/#/isp_flashing_guide) the chip with the new bootloader hex file created (or the production hex), and set the fuses:
| Fuse | Setting |
|----------|------------------|
| Low | `0xDF` |
| High | `0xD8` or `0x98` |
| Extended | `0xCB` |
Original (Caterina) settings:
| Fuse | Setting |
|----------|------------------|
| Low | `0xFF` |
| High | `0xD8` |
| Extended | `0xFE` |

View File

@ -5,7 +5,7 @@ MCU = atmega32u4
F_CPU = 8000000
# Bootloader selection
BOOTLOADER = qmk-dfu
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable

View File

@ -4,8 +4,6 @@
It's a DIY, QMK Powered Trackball!!!!
Everything works. However the scroll wheel has some issues and acts very odd.
* Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/)
* Hardware Supported: ATMega32u4 8MHz(3.3v)
* Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco)