Commit Graph

12257 Commits (52ac6c4303e4333f9ccb7ecf9dbd691edaad1182)

Author SHA1 Message Date
Nick Brassel 52ac6c4303
Allow trailing whitespace in markdown docs, for formatting purposes. (#8774) 2020-04-13 11:31:40 +10:00
Nick Brassel 05e9ff6554
Add support for hardware and board initialisation overrides. (#8330)
* Add support for hardware and board initialisation overrides.

* qmk cformat.

* Add some documentation.

* Docs clarity.

* Make early_hardware_init_pre a no-op for now, until migrations occur.

* Doco update

* Make distinction between keyboard and ChibiOS board in docs

* Doc anchors.

* Update tmk_core/protocol/chibios/main.c

Co-Authored-By: Joel Challis <git@zvecr.com>

* Rework bootloader entry to be off by default, allow opting-in.

Co-authored-by: Joel Challis <git@zvecr.com>
2020-04-13 09:39:38 +10:00
Sergey Vlasov 17bda000f3
[Keyboard] Add IDOBAO ID80 (#8728)
* id80: New keyboard (IDOBAO ID80)

Add initial support for the IDOBAO ID80 keyboard.

Most source files were generated by the KBFirmware JSON to QMK Parser
(https://noroadsleft.github.io/kbf_qmk_converter/) based on the
ID80.json file provided by the keyboard vendor.  The only change to
rules.mk was to set `COMMAND_ENABLE = no` to make the compiled firmware
fit into the available flash space.

* id80: Update default keymap to match stock

Update the Fn layer in the default keymap to match the stock firmware
which was actually flashed into the PCB.

* id80: Add Caps Lock indicator support

Although the KBFirmware JSON includes information about the MCU pins
used for keyboard indicator LEDs, the KBF to QMK converter does not
generate the required code automatically.  Implement the LED handling
code, and at the same time switch from the older `led_set_kb` API to the
newer `led_update_kb`.

* id80: Remove placeholder functions

The provided skeletons for `matrix_scan_kb` and `process_record_kb` did
not do anything useful, so remove them.

* id80: Use Esc as the Bootmagic Lite activation key

The Esc key is not at the (0, 0) position in the ID80 matrix, therefore
setting `BOOTMAGIC_LITE_ROW` and `BOOTMAGIC_LITE_COLUMN` is required to
use the Esc key for Bootmagic Lite.

* id80: Update info.json

Replace info.json generated by the KBF to QMK converter with another
version generated using http://www.keyboard-layout-editor.com/ and the
KLE raw to QMK info.json converter (https://qmk.fm/converter/).  The
updated info.json has the correct physical layout (the distance between
the function key row and the main block is actually 0.25U, but the
vendor-provided ID80.json had 0.5U there) and correct key labels (using
the stock layout instead of raw matrix locations and pin names).

* id80: Enable NKRO

The default keymap is updated to have NK_TOGG at Fn+N, like most other
keyboards which have NKRO enabled.

* id80: Use unique USB vendor/product ID

Having an unique USB vendor/product ID is required for VIA support.
The vendor ID value is the same as for the `idobo` (ID75) keyboard.

* id80: Fix right modifiers in the default keymap

For some reason the default keymap converted from the vendor-supplied
JSON had the right Shift, Alt and Ctrl keys mapped to the left side
modifier keycodes.

* id80: Remove empty row 6 (F0) from matrix

The matrix layout which was defined in the vendor-supplied ID80.json
file had 12 rows which corresponded to the left and right parts of the
6 physical rows.  However, the row 6 of the matrix (connected to the F0
pin), which corresponded to the right part of the physical bottom row,
was completely empty (all 9 keys of the bottom row were placed in the
matrix row for the left part).  Keeping this row in the matrix just
wastes resources; in particular, when the VIA support is enabled, having
a 9×12 matrix with 4 layers leaves only 122 bytes available for dynamic
macros, which is less than the recommended minimum of 128 bytes.
Removing the unused row reduces the matrix size to 9×11, which leaves
194 bytes of EEPROM space for dynamic macros.

* id80: Update row numbers in the LAYOUT macro

Update row numbers in the names of the LAYOUT macro parameters after
removing a row in the middle.

* id80: Set RGBLED_NUM to 20 to match the actual PCB

The vendor-supplied ID80.json file specified that the PCB should have
28 RGB LEDs in the chain.  However, the actual PCB that was shipped
from AliExpress had 20 LEDs in the chain (16 underglow LEDs, and then 4
more LEDs on top of the PCB, to the right of the Enter key location).
Update RGBLED_NUM to match the actual PCB.
2020-04-12 23:55:01 +01:00
Danny 46a69d1f3b
[Keyboard] Quefrency Rev2 Caps Lock LED, set lighting defaults (#8729)
* Add support for Caps Lock LED

Currently ignores the fact that led_state is not synced between halves, so caps lock LED doesn't do anything if USB is plugged into right half

* Set initial backlight and RGB mode/values on blank EEPROM

* Set default VIA layout options

* Add backlight/RGB ifdefs

* Set bootloaders for each rev
2020-04-12 13:09:09 -07:00
Derek b56a41800a
[Keyboard] Add handwired Fc200rt qmk board (#8726)
* Added handwired Leopold fc200rt

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Delete readme.md

* Delete config.h

* Update readme.md

* Update rules.mk

* Update keyboards/handwired/fc200rt_qmk/fc200rt_qmk.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-04-12 13:05:46 -07:00
Takeshi ISHII d3c29c9b3c
Bugfix for quantum/dip_switch.c (#8731)
* dipsw test on helix/rev2/sc/back:five_rows

* bug fix quantum/dip_switch.c

* test end. remove test code. Revert "dipsw test on helix/rev2/sc/back:five_rows"

This reverts commit 4b13ebb996e1c4997e6deb1fa3b3227db5fa9661.

* dipsw test on helix/rev2/sc/back:five_rows

* update quantum/dip_switch.c

* test end. remove test code. Revert "dipsw test on helix/rev2/sc/back:five_rows"

This reverts commit bf99ace095528ad65c531229bcf5ece037dda595.
2020-04-12 12:44:24 -07:00
Konstantin Đorđević 370577e4ed
Add *OPT aliases for *ALT keycodes and macros (#8714) 2020-04-12 11:37:55 -07:00
George Petri 6e84247ec2
[Keymap] Add keymap for Nyquist rev3 (#8706)
* copy nyquist setup

* enable i2c

* update colors

* update readme

* Update keyboards/keebio/nyquist/keymaps/georgepetri3/keymap.c

Co-Authored-By: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
2020-04-12 11:33:11 -07:00
QMK Bot 5380c29dd7 format code according to conventions [skip ci] 2020-04-12 18:11:52 +00:00
artjomsR 23f19852b9
Added Workman ZXCVM variation (#8686)
* Added Workman ZXCVM variation

* Update quantum/keymap_extras/keymap_workman_zxcvm.h

Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>

* Update quantum/keymap_extras/sendstring_workman_zxcvm.h

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update quantum/keymap_extras/keymap_workman_zxcvm.h

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update quantum/keymap_extras/keymap_workman_zxcvm.h

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update quantum/keymap_extras/sendstring_workman_zxcvm.h

Co-Authored-By: Ryan <fauxpark@gmail.com>

Co-authored-by: Konstantin Đorđević <vomindoraan@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-04-12 10:37:17 -07:00
jotix 8a5c1e1859
[Keyboard] jotpad16 status leds (#8643)
* jotpad16 status leds

* jotpad16

* readme.md
2020-04-12 10:25:09 -07:00
Benjamin Smith 6265b78307
[Keyboard] Add handwired BDN9-BLE (#8192)
* Add handwired BDN9-BLE

* Apply suggestions from code review

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update keyboards/handwired/bdn9_ble/rules.mk

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update keyboards/handwired/bdn9_ble/rules.mk

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update keyboards/handwired/bdn9_ble/readme.md

Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-04-12 09:15:31 -07:00
Drashna Jaelre 23124b9fd1
Fix bug with layer caching in get_event_keycode (#8693)
* Fix bug with layer caching in get_event_keycode

* Improve naming
2020-04-12 17:27:17 +02:00
Andrew Kannan eb7fc7f9d9
[Keyboard] Add CannonKeys Atlas keyboard (#8207)
* Atlas keyboard

* Update info and readme

* Update firmware

* Apply suggestions from code review

* Updates

* Add 2x2U layout

* Minor cleanup

* Fix trailing comma

* Remove line

* Apply suggestions from code review
2020-04-12 08:08:15 -07:00
Ryan c2df714c3b
Add VIA keymap for Wasdat (#8762)
* Add VIA keymap for Wasdat

* Enable Bootmagic Lite at keyboard level
2020-04-12 15:02:14 +02:00
Andrew Kannan 799b21f8cd
[Keyboard] Add CannonKeys Rekt1800 keyboard (#7760)
* Add Rekt1800 keyboards

* Update keyboards/cannonkeys/rekt1800/config.h

* Update keyboards/cannonkeys/rekt1800/info.json

* Apply suggestions from code review

* Apply suggestions from code review

* Remove line

* Apply suggestions from code review
2020-04-12 03:36:03 -07:00
Joshua Moses Diamond 750179e111
Fix a couple of typos that were causing confusion (#8767) 2020-04-12 16:22:59 +10:00
James Forcier f538b2273a
Upgrade gcc version/tweak package installs in Gentoo installation (#8757)
GCC 4.9.4 is no longer available on Gentoo (or Sabayon), which causes
problems when attempting to install on either of these platforms. Since
QMK is not particularly sensitive to its GCC version, modify the version
restriction to <9 so newer versions of GCC may be installed. Since the
toolchain for arm-none-eabi isn't currently installed as part of setup,
add that as well.

Additionally, drop the Python installation as part of the Gentoo
installation process. Python is a core system package on Gentoo and can
therefore be assumed to be present; in addition, the slot restriction of
3.5 which was present is also no longer available in Gentoo.

Finally, separate the gcc rebuild invocation of `emerge` from the new
packages that may need to be installed, and apply the `--noreplace` flag
to new packages so that they are not rebuilt if already present.
2020-04-12 16:13:45 +10:00
Joel Challis 50e85f91e8
Fix compile issues with devastatingtkl (#8765) 2020-04-12 14:53:30 +10:00
Andrew Kannan 27e7f322a5
CannonKeys DB60 (Daughterboard60) PCB (#8208)
* Cannonkeys DB60 Keyboard

* WhitespacE

* Add ISO and make layer names more idiomatic

* backlight enable

* Remove big backslash from ISO

* Apply suggestions from code review

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update for correct matrix

* Apply suggestions from code review

Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update chibios config files

* Complete VIA keymap

* Remove ugly hack comments

* Update keyboards/cannonkeys/db60/rules.mk

Co-Authored-By: Joel Challis <git@zvecr.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
2020-04-11 23:21:36 +01:00
Andrew Kannan dfdc89296b
DevastatingTKL Keyboard (#8209)
* Save progress

* Finished matrix and everything

* Apply suggestions from code review

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update DevastatingTKL

* Renames

* Add renamed files

* Update chibios files and VIA keymap for completion

* Some cleanup

* Apply suggestions from code review

Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/cannonkeys/devastatingtkl/rules.mk

Co-Authored-By: Joel Challis <git@zvecr.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
2020-04-11 23:19:44 +01:00
James Young 671020af08
hineybush Physix Configurator bugfix (#8761)
* file linting

* fix object order
2020-04-11 12:42:13 +01:00
Purdea Andrei b8c3f4c60b
quantum/debounce: Added sym_pk debounce algorithm (#8587)
* quantum/debounce: Added sym_pk debounce algorithm

* Apply suggestions from code review

Co-Authored-By: Ryan <fauxpark@gmail.com>

* quantum/debounce/sym_pk: delete comments and rename functions following code review

* quantum/debounce/sym_pk: Modifications for code readability according to code review

* quantum/debounce/sym_pk: Modifications for code readability according to code review (2)

* quantum/debounce/sym_pk: code review: cleaner code

Co-Authored-By: Nick Brassel <nick@tzarc.org>

Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
2020-04-11 21:29:48 +10:00
Takeshi ISHII 511fe643c2
[Keymap] fix OLED display on Helix keyboard keymaps default and… (#8737)
Since #7773, the mode number of RGBlight is no longer displayed on the Helix OLEDs. I fixed this.
2020-04-11 10:41:12 +02:00
moyi4681 f7601dba13
change kbd67 rev1 and rev2 default keymaps (#8758)
* change kbd67 default keymap
2020-04-10 20:15:23 -07:00
Reid 89cab95b63
[Keyboard] Add splitish (#8751)
* Added personal minivan keymap, and started work on splitish directory

* Merge branch 'splitish' of github.com:RSchneyer/qmk_firmware into splitish

Trying to undo attempted fix

Added splitish keyboard files, removed personal Minivan keymap

* Removed personal Minivan keymaps

* Fixed small issue in readme

* Added changes based on inital PR feedback

* forgot a semicolon

* Quick config.h file and default keymap update
2020-04-11 11:43:21 +10:00
QMK Bot cc38627816 format code according to conventions [skip ci] 2020-04-11 00:48:16 +00:00
Purdea Andrei 6c2c3c13e9
Various fixes to how timer differences are calculated (#8585)
* tmk_core/common: Fixing TIMER_DIFF macro to calculate difference correctly after the timer wraps.

Let's go through an example, using the following macro:

If the first timer read is 0xe4 and the second one is 0x32, the timer wrapped.
If the timer would have had more bits, it's new value would have been 0x132,
and the correct difference in time is 0x132 - 0xe4 = 0x4e

old code TIMER_DIFF_8(0x32, 0xe4) = 0xff - 0xe4 + 0x32 = 0x4d, which is wrong.
new code TIMER_DIFF_8(0x32, 0xe4) = 0xff + 1 - 0xe4 + 0x32 = 0x4e, which is correct.

This also gives a chance for a smart compiler to optimize the code using normal
integer overflow.

For example on AVR, the following C code:
uint8_t __attribute__ ((noinline)) test(uint8_t current_timer, uint8_t start_timer)
{
    return TIMER_DIFF_8(current_timer, start_timer);
}
With the original code, it gets translated to the following list of instructions:
00004c6e <test>:
    4c6e:       98 2f           mov     r25, r24
    4c70:       86 1b           sub     r24, r22
    4c72:       96 17           cp      r25, r22
    4c74:       08 f4           brcc    .+2             ; 0x4c78 <test+0xa>
    4c76:       81 50           subi    r24, 0x01       ; 1
    4c78:       08 95           ret
But with this commit, it gets translated to a single instruction:
00004c40 <test>:
    4c40:       86 1b           sub     r24, r22
    4c42:       08 95           ret

This unfortunately doesn't always work so nicely, for example the following C code:
int __attribute__ ((noinline)) test(uint8_t current_timer, uint8_t start_timer)
{
    return TIMER_DIFF_8(current_timer, start_timer);
}
(Note: return type changed to int)
With the original code it gets translated to:
00004c6e <test>:
    4c6e:       28 2f           mov     r18, r24
    4c70:       30 e0           ldi     r19, 0x00       ; 0
    4c72:       46 2f           mov     r20, r22
    4c74:       50 e0           ldi     r21, 0x00       ; 0
    4c76:       86 17           cp      r24, r22
    4c78:       20 f0           brcs    .+8             ; 0x4c82 <test+0x14>
    4c7a:       c9 01           movw    r24, r18
    4c7c:       84 1b           sub     r24, r20
    4c7e:       95 0b           sbc     r25, r21
    4c80:       08 95           ret
    4c82:       c9 01           movw    r24, r18
    4c84:       84 1b           sub     r24, r20
    4c86:       95 0b           sbc     r25, r21
    4c88:       81 50           subi    r24, 0x01       ; 1
    4c8a:       9f 4f           sbci    r25, 0xFF       ; 255
    4c8c:       08 95           ret
Wth this commit it gets translated to:
00004c40 <test>:
    4c40:       28 2f           mov     r18, r24
    4c42:       30 e0           ldi     r19, 0x00       ; 0
    4c44:       46 2f           mov     r20, r22
    4c46:       50 e0           ldi     r21, 0x00       ; 0
    4c48:       86 17           cp      r24, r22
    4c4a:       20 f0           brcs    .+8             ; 0x4c54 <test+0x14>
    4c4c:       c9 01           movw    r24, r18
    4c4e:       84 1b           sub     r24, r20
    4c50:       95 0b           sbc     r25, r21
    4c52:       08 95           ret
    4c54:       c9 01           movw    r24, r18
    4c56:       84 1b           sub     r24, r20
    4c58:       95 0b           sbc     r25, r21
    4c5a:       93 95           inc     r25
    4c5c:       08 95           ret
There is not much performance improvement in this case, however at least with this
commit it functions correctly.

Note: The following commit will improve compiler output for the latter example.

* tmk_core/common: Improve code generation for TIMER_DIFF* macros

Because of integer promotion the compiler is having a hard time generating
efficient code to calculate TIMER_DIFF* macros in some situations.
In the below example, the return value is "int", and this is causing the
trouble.

Example C code:

int __attribute__ ((noinline)) test(uint8_t current_timer, uint8_t start_timer)
{
    return TIMER_DIFF_8(current_timer, start_timer);
}

BEFORE: (with -Os)

00004c40 <test>:
    4c40:       28 2f           mov     r18, r24
    4c42:       30 e0           ldi     r19, 0x00       ; 0
    4c44:       46 2f           mov     r20, r22
    4c46:       50 e0           ldi     r21, 0x00       ; 0
    4c48:       86 17           cp      r24, r22
    4c4a:       20 f0           brcs    .+8             ; 0x4c54 <test+0x14>
    4c4c:       c9 01           movw    r24, r18
    4c4e:       84 1b           sub     r24, r20
    4c50:       95 0b           sbc     r25, r21
    4c52:       08 95           ret
    4c54:       c9 01           movw    r24, r18
    4c56:       84 1b           sub     r24, r20
    4c58:       95 0b           sbc     r25, r21
    4c5a:       93 95           inc     r25
    4c5c:       08 95           ret

AFTER: (with -Os)

00004c40 <test>:
    4c40:       86 1b           sub     r24, r22
    4c42:       90 e0           ldi     r25, 0x00       ; 0
    4c44:       08 95           ret

Note: the example is showing -Os but improvements can be seen at all optimization levels,
including -O0. We never use -O0, but I tested it to make sure that no extra code is
generated in that case.OA

* quantum/debounce: Fix custom wrapping timers in eager_pr and eager_pk debounce algorithms

Please see the below simulated sequence of events:
Column A is the 16-bit value returned by read_timer();
Column B is the value returned by custom_wrap_timer_read();
Column C is the original code: (timer_read() % MAX_DEBOUNCE)

    A,     B,     C
65530,    19,    30
65531,    20,    31
65532,    21,    32
65533,    22,    33
65534,    23,    34
65535,    24,    35
    0     25,     0
    1,    26,     1
    2,    27,     2
    3,    28,     3
    4,    29,     4
    5,    30,     5

read_timer() wraps about every 1.09 seconds, and so debouncing might
fail at these times without this commit.

* quantum/debounce/eager_pr and eager_pk: modifications for code readability according to code review.

* quantum/debounce/eager_pr and eager_pk: modifications for code readability according to code review. (2)
2020-04-11 10:14:28 +10:00
Joshua Moses Diamond e4cc642a79
Some refinements of 75_ansi/spidey3 layout (#8581)
* First cut at Josh Diamond's KBD75 customizations.
Includes:
* My unique keymap with ChromeOS specific keys
* Use RGB underglow to indicate Caps Lock
* Some unicode bindings
* Some changes to make debugging easier

* Updated spidey3 to be applicable to all 75_ansi boards

* Sadly, ChromeOS doesn't pay attention to most consumer codes

* Add mac layer; fix flakeyness in CAPS_LOCK underglow.

* Make layers.json match the keymap (to the extent possible)

* Major cleanup; fix broken debug persistence

* Cleanup some whitespace issues

* Fix incorrect log message.

* Rework layer indication to user RGBLIGHT_LAYERS

* Update layouts/community/75_ansi/spidey3/keymap.c

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Rename users/spidey3/rgblight.c to layer_rgb.c per suggestion

* Refactor to use set_single_persistant_default_layer().

* Use dprint/f to make logging more elegant.

* Update users/spidey3/config.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update users/spidey3/config.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update layouts/community/75_ansi/spidey3/rules.mk

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update users/spidey3/spidey3.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update users/spidey3/layer_rgb.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update users/spidey3/init.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Changes from code review

* Numpad layer, various keys for 75_ansi/spidey3

* Add Fn-B to toggle NKRO

* Blink rgb to acknowledge some setting changes

* Updated media control & reset key location

* Minor cleanup

Co-authored-by: Joshua Diamond <jdiamond@Deep-Thought.local>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-04-11 10:10:37 +10:00
Keith Long c3c3943432
[Keymap] added vim compatibility, backspace above enter, and general macOS opt… (#8080)
* added vim compatibility, backspace above enter, and general macOS optimizations on top of default layout

* add space65 macOS keymap for vim users with an optimized bottom row

* Update keyboards/projectkb/alice/keymaps/keithlo/keymap.c
2020-04-10 14:53:13 -07:00
foxx1337 061ed87b89
Modernize ctrl, shift, alt mods detection (#8724) 2020-04-10 20:19:34 +01:00
Spaceman 5c1aca0b88
Fix spaceman naming (#8741)
* Fix spaceman naming

* Update keyboards/pancake/info.json

* Update keyboards/2_milk/info.json
2020-04-10 00:44:45 -07:00
Marko Bakan 6384a2abd8
[Keyboard] obuwunkunubi/spaget handwired (#8738)
* adding my keymap

* Update keyboards/handwired/obuwunkunubi/spaget/readme.md

* Update keyboards/handwired/obuwunkunubi/spaget/readme.md

* Update keyboards/handwired/obuwunkunubi/spaget/keymaps/default/rules.mk

* Update rules.mk

* Update keyboards/handwired/obuwunkunubi/spaget/spaget.h

* Update keyboards/handwired/obuwunkunubi/spaget/spaget.h

* Update keyboards/handwired/obuwunkunubi/spaget/info.json

* Update keyboards/handwired/obuwunkunubi/spaget/rules.mk

* Update rules.mk

* Update keyboards/handwired/obuwunkunubi/spaget/spaget.c

* Update keyboards/handwired/obuwunkunubi/spaget/keymaps/default/keymap.c

* Update keyboards/handwired/obuwunkunubi/spaget/keymaps/default/keymap.c

* Update keyboards/handwired/obuwunkunubi/spaget/keymaps/default/keymap.c

* Update keyboards/handwired/obuwunkunubi/spaget/keymaps/default/keymap.c

* Update keyboards/handwired/obuwunkunubi/spaget/keymaps/default/keymap.c

* Update keyboards/handwired/obuwunkunubi/spaget/keymaps/default/keymap.c

* Update keyboards/handwired/obuwunkunubi/spaget/keymaps/default/keymap.c

* Update keyboards/handwired/obuwunkunubi/spaget/info.json

* Update keymap.c

* Apply suggestions from code review

* Apply suggestions from code review

* Update spaget.h

* Update keymap.c

Updated comments
2020-04-09 12:45:08 -07:00
Konstantin Đorđević 439afc883a
[Keymap] Update personal userspace and keymaps (#8747)
* Update mousekey parameters in userspace

* Disable GRAVE_ESC in boards where it isn't used

* Tweak MODERN_DOLCH_RED and reset RGB on Shift+Toggle in KBD6X

* Disable RGB controls when Fn/Caps indicator lights are on

* Use LTO_ENABLE instead of setting -flto directly

* Add led_update_keymap, use SS_LCTL instead of SS_LCTRL

* Change TAPPING_TOGGLE from 2 to 3
2020-04-09 09:54:19 -07:00
Manna Harbour 07c75feba3
Add PS2_MOUSE_ROTATE to compensate for device orientation (#8650)
* Add PS2_MOUSE_ROTATE to compensate for device orientation

* fixup! Add PS2_MOUSE_ROTATE to compensate for device orientation

* Reformat with IndentPPDirectives: AfterHash as per #6316
2020-04-09 01:29:27 -07:00
Joshua Rubin b5aa5e4338
Add RGB support in via to launchpad (#8621)
Signed-off-by: Joshua Rubin <me@jawa.dev>
2020-04-09 09:25:08 +02:00
George Wietor be8443b35b
VIA support for the KBDFans KBD6x (#8680)
* Add VIA keymap

* Update VID/PID

- Update VID/PID to match other KBDfans keyboards
- Flesh out keyboard description

* add missing newline. whoops.

* Update keyboards/kbdfans/kbd6x/keymaps/via/rules.mk

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* update author / copyright date

* Update keyboards/kbdfans/kbd6x/keymaps/via/rules.mk

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update keyboards/kbdfans/kbd6x/keymaps/via/keymap.c

Co-Authored-By: Joel Challis <git@zvecr.com>

* Update keyboards/kbdfans/kbd6x/kbd6x.h

Co-Authored-By: Joel Challis <git@zvecr.com>

Co-authored-by: George Wietor <george@light-gray.attlocal.net>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
2020-04-09 09:16:04 +02:00
Konstantin Đorđević 4b10235f67
Set the correct RGB LED count on YD60MQ (#8629)
* Fix RGB LED count on YD60MQ

* Split YD60MQ into 12-LED and 16-LED revisions

* Update readmes

* Make 12led the default version

* Readd base rules.mk, version→variant in readme

* Add syntax highlighting to code blocks in readme
2020-04-08 18:51:18 -07:00
Yan-Fa Li 6ef13f83e2
[Keymap] Updates to personal keymaps (#8665) 2020-04-08 18:20:58 -07:00
Konstantin Đorđević be2f5816b6
Fix compile issues related to NO_ACTION_MACRO/FUNCTION and LTO_ENABLE (#8663)
* Define NO_ACTION_MACRO/FUNCTION in header instead of makefile when LTO is enabled

Currently, boards and keymaps that define NO_ACTION_MACRO/FUNCTION unconditionally
will not compile with LTO_ENABLE (#8604). This fixes the issue by moving the
definitions from common.mk to action.h, which enables us to check for previous
definitions of those macros (this cannot be done in a makefile).

* Remove LTO checks in templates

Since now NO_ACTION_MACRO/FUNCTION are defined as needed in action.h (which is
included by quantum.h), checking for LTO in keyboard and user code is no
longer required.

* Update LTO_ENABLE docs
2020-04-09 00:18:30 +01:00
stanrc85 ff213d5fe1
[Keymap] Userspace update Rgb layers code (#8659)
* enable rgblight layers

* rgblight layers code

* switch to new rgblight layers

* testing led positions

* fix caps typo

* lights and colors working

* rules updated for different rgb use

* Extra spaces removed
2020-04-08 23:56:55 +01:00
Danny 3234118e52
Add Choconum (#8709)
* Add Choconum

* Disable SPI/I2C, add mem fix

* Rename layouts

* Nuke unused config.h files

* Fix username
2020-04-08 20:30:33 +02:00
Jared Giles a1ffc40b36
Add Via keymap for BM16-A (#8681)
* Add Via keymap for BM16-A

* Apply suggestions from code review

Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-Authored-By: Ryan <fauxpark@gmail.com>

* Deleted as per noroadsleft

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-04-08 20:04:39 +02:00
Erovia 8fe5c718b4 Fix edge-case with config
Without this check, users can lock themselves out by enabling developer
mode, than disabling the dependencies. They wouldn't be able to turn off
developer mode as none of the subcommands (including 'config') would
work.
2020-04-08 09:31:14 -07:00
Erovia 38f14c4174 Don't hide for devs... 2020-04-08 09:31:14 -07:00
Erovia eb683c8c52 Apply @skullydazed's suggestions, move 'import milc'
Only 'import milc' after we are sure that the minimum required modules
are available, as it depends on a few of them.
2020-04-08 09:31:14 -07:00
Erovia 21799be1ca Make dedicated sections for user/dev commands in docs 2020-04-08 09:31:14 -07:00
Erovia 5cfc3ce02e Rebase on master, hide some other subcommands
The list of hidden subcommands were approved by @skullydazed ;)
Currently hidden if 'user.developer' is not True:

  - cformat
  - docs
  - kle2json
  - pyformat
  - pytest
2020-04-08 09:31:14 -07:00
Erovia 724f20ed32 Use milc for config check, requirements fixes
Use milc's config finding and parsing to check if the user is a
developer or not.
'requirements-dev.txt' will now load 'requirements.txt', so no need to
run pip twice.
Add missing 'yapf' dependency to 'requirements-dev.txt'.
2020-04-08 09:31:14 -07:00
Erovia c61f016fa4 CLI: Add development mode support
Hide development specific options and don't require dev modules unless
`user.developer` is set to `True`.
2020-04-08 09:31:14 -07:00