Commit Graph

224 Commits (4c1c112a16532270d7744c19875287f3880edc55)

Author SHA1 Message Date
James Young 1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Sergey Vlasov da6e888a32
Do not leak weak mods from tap dance to the interrupting keypress (#12471)
Tap dance callbacks may register weak mods; one case when it happens
is when a tap dance registers a key with modifiers.  When the tap
dance is interrupted by pressing another key, these weak mods could
affect the interrupting key (normally any stale weak mods are cleared
at the start of action_exec() when handling a keypress event, but the
tap dance interrupt check code is called later, and the weak mods left
by that code were not cleared).  Add another clear_weak_mods() call to
preprocess_tap_dance() to make sure that the interrupting keypress is
not affected by unrelated weak mods from the previous tap dance.

Fixes #12445.
2021-04-25 13:41:37 +10:00
Drashna Jaelre 57475caab0
Fix issues when manually shifting characters and Auto Shift (#12083)
Specifically, when using the Auto-Shift feature, if you hold and roll shift, it would not actually shift the character that you hit after the shift
2021-03-25 23:41:19 +11:00
jakobkg 8e820cde13
Fix handling multiples of the same MIDI note (fixes bug brought up in issue #10199) (#11639)
* Fix handling multiples of the same MIDI note

* Extend MIDI note status to fix note releases
2021-03-25 22:51:57 +11:00
Ryan 88dce24375
Remove hex_to_keycode and move tap_random_base64 to send_string.c (#12079) 2021-03-12 18:03:44 +11:00
Takeshi Nishio 71f067a60e
Fix wrong key when "Music Map" is used with MAJOR_MODE. (#11234)
With MAJOR_MODE (= major scale), keys in one octave is not 12 but 7.
To solve this problem, change divisor number from 12 to 7 at %(Modulo) and /(Division).

NOTE:
The last 12 represents half step keys in one octave for pitch calculation.
2021-01-19 18:08:06 -08:00
Drashna Jaelre 810eafad12
Fix Tap-Hold Configs (#11127)
* Add proper prototypes for Tap-Hold Per Key functions

* Fix handwired/tennie default keymap

* Remove unneeded references

* Fix tapping term per key check in space cadet

* Pre-emptive fix for tap dance

* Fix marksard/leftover30

* Replace hard coded tapping term with define
2021-01-04 16:37:20 -08:00
Ryan 48f4768d33
Change include guards in quantum/ to pragma once (#11239) 2020-12-26 15:53:12 +11:00
Joshua Diamond f40b564683
Partial fix for Issue #9405 - Caps Lock not working with Unicode Map's XP on Linux (#11232) 2020-12-23 04:51:47 +11:00
Joshua Diamond 54e2bf3ede
Fix Issue #9533 - Delayed shift state handling (#11220)
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-12-22 18:23:09 +01:00
Ryan 501f2fdef1
Normalise include statements in core code (#11153)
* Normalise include statements in core code

* Missed one
2020-12-11 13:45:24 +11:00
James Young c66df16644
2020 November 28 Breaking Changes Update (#11053)
* Branch point for 2020 November 28 Breaking Change                                                

* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)                                           

* Add support for soft serial to ATmega32U2 (#10204)                                               

* Change MIDI velocity implementation to allow direct control of velocity value (#9940)            

* Add ability to build a subset of all keyboards based on platform.                                

* Actually use eeprom_driver_init().                                                               

* Make bootloader_jump weak for ChibiOS. (#10417)                                                  

* Joystick 16-bit support (#10439)                                                                 

* Per-encoder resolutions (#10259)                                                                 

* Share button state from mousekey to pointing_device (#10179)                                     

* Add hotfix for chibios keyboards not wake (#10088)                                               

* Add advanced/efficient RGB Matrix Indicators (#8564)                                             

* Naming change.                                                                                   

* Support for STM32 GPIOF,G,H,I,J,K (#10206)                                                       

* Add milc as a dependency and remove the installed milc (#10563)                                  

* ChibiOS upgrade: early init conversions (#10214)                                                 

* ChibiOS upgrade: configuration file migrator (#9952)                                             

* Haptic and solenoid cleanup (#9700)                                                              

* XD75 cleanup (#10524)                                                                            

* OLED display update interval support (#10388)                                                    

* Add definition based on currently-selected serial driver. (#10716)                               

* New feature: Retro Tapping per key (#10622)                                                      

* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)             

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)

* Rescale both ChibiOS and AVR backlighting.                                                       

* Reduce Helix keyboard build variation (#8669)                                                    

* Minor change to behavior allowing display updates to continue between task ticks (#10750)        

* Some GPIO manipulations in matrix.c change to atomic. (#10491)                                   

* qmk cformat (#10767)                                                                             

* [Keyboard] Update the Speedo firmware for v3.0 (#10657)                                          

* Maartenwut/Maarten namechange to evyd13/Evy (#10274)                                             

* [quantum] combine repeated lines of code (#10837)                                                

* Add step sequencer feature (#9703)                                                               

* aeboards/ext65 refactor (#10820)                                                                 

* Refactor xelus/dawn60 for Rev2 later (#10584)                                                    

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)                                 

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)                                    

* update chibios os usb for the otg driver (#8893)                                                 

* Remove HD44780 References, Part 4 (#10735)                                                       

* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)                                                

* Fix cursor position bug in oled_write_raw functions (#10800)                                     

* Fixup version.h writing when using SKIP_VERSION=yes (#10972)                                     

* Allow for certain code in the codebase assuming length of string. (#10974)                       

* Add AT90USB support for serial.c (#10706)                                                        

* Auto shift: support repeats and early registration (#9826)                                       

* Rename ledmatrix.h to match .c file (#7949)                                                      

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)                                        

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)                                        

* Merge point for 2020 Nov 28 Breaking Change
2020-11-28 12:02:18 -08:00
Ryan 2c92ee1f56
Allow modified keycodes in Unicode input (#10658) 2020-10-27 06:14:56 +11:00
a_p_u_r_o bc79e51990
Fix issue introduced by PR#10404 (#10559) 2020-10-07 13:30:43 +11:00
3araht 2bcac45650
Fix for MIDI sustain effect issue (#10361) 2020-10-04 14:32:24 -07:00
QMK Bot c8cff1489a format code according to conventions [skip ci] 2020-10-04 20:54:31 +00:00
cmdremily ef7c79b781 Fix issues with unused variables and functions preventing a clean compile. 2020-09-23 14:15:25 +02:00
QMK Bot a3db72df72 format code according to conventions [skip ci] 2020-08-29 22:57:48 +00:00
Greg Wright 568cae28ec #define AUTO_SHIFT_SETUP (#8441)
* #define AUTO_SHIFT_SETUP

* Clarification

Changed `#ifndef` to `#ifdef` and moved enable disable outside AUTO_SHIFT_SETUP

* AUTO_SHIFT_NO_SETUp
2020-08-29 14:30:02 -07:00
a-chol d4be07dad3 Hid joystick interface (#4226)
* add support for hid gamepad interface
add documentation for HID joystick
Add joystick_task to read analog axes values even when no key is pressed or release. update doc
Update docs/feature_joystick.md
Manage pin setup and read to maintain matrix scan after analog read

* Incorporates patches and changes to HID reporting

There are some patches provided by @a-chol incorporated on this commit,
and also some changes I made to the HID Report structure.

The most interesting is the one dealing with number of buttons: Linux
doesn't seem to care, but Windows requires the HID structure to be byte
aligned (that's in the spec). So if one declares 8/16/32... buttons they
should not have any issues, but this is what happens when you have 9
buttons:

```
 bits |0|1|2|3|4|5|6|7|
      |*|*|*|*|*|*|*|*| axis 0 (report size 8)
      |*|*|*|*|*|*|*|*| ...
      |*|*|*|*|*|*|*|*|
      |*|*|*|*|*|*|*|*|
      |*|*|*|*|*|*|*|*|
      |*|*|*|*|*|*|*|*|
      |*|*|*|*|*|*|*|*| axis 6
      |*|*|*|*|*|*|*|*| first 8 buttons (report size 1)
      |*| | | | | | | | last of 9 buttons, not aligned
```

So for that I added a conditonal that will add a number of reports with
size 1 to make sure it aligns to the next multiple of 8. Those reports
send dummy inputs that don't do anything aside from aligning the data.

Tested on Linux, Windows 10 and Street Fighter (where the joystick is
recognized as direct-input)

* Add save and restore of each pin used in reading joystick (AVR).
Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc
instead of an output pin from the MCU.

Fix joystick report id

Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes)

Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis.

Documentation fixes

* Fix port addressing for joystick analog read

* The other required set of changes
As per the PR, the changes still holding it up.
Add onekey for testing.
Fix ARM builds.
Fix device descriptor when either axes or buttons is zero.
Add compile-time check for at least one axis or button.
Move definition to try to fix conflict.
PR review comments.
qmk cformat

* avoid float functions to compute range mapping for axis adc reading

* Remove V-USB support for now. Updated docs accordingly.

* Update tmk_core/protocol/lufa/lufa.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update tmk_core/protocol/usb_descriptor.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update tmk_core/protocol/usb_descriptor.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update tmk_core/protocol/usb_descriptor.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios

* Fix HID joystick report sending for ChibiOS.
Add one analog axis to the onekey:joystick keymap.
Fix pin state save and restore during joystick analog read for STM32
MCUs.

* Update tmk_core/protocol/chibios/usb_main.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update tmk_core/protocol/lufa/lufa.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Add missing mcuconf.h and halconf.h to onekey:joystick keymap.
Add suggested fixes from PR.

* Switch saveState and restoreState signature to use pin_t type.
onekey:joystick : add a second axis, virtual and programmatically animated.

* Update docs/feature_joystick.md

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update docs/feature_joystick.md

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Add PR corrections

* Remove halconf.h and mcuconf.h from onekey keymaps

* Change ADC_PIN to A0

Co-authored-by: achol <allecooll@hotmail.com>
Co-authored-by: José Júnior <jose.junior@gmail.com>
Co-authored-by: a-chol <achol@notamail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-08-29 14:30:02 -07:00
Drashna Jaelre 9d3b26a475 Update features to use Custom Tapping Term when appropriate (#6259)
* Update Space Cadet to use Custom Tapping Term functionality

* Detect correct keycode for space cadet tapping term

* Update tap dancing to use global custom tapping term

* Update documentation for Tap Dances

* formatting pass

* Apply suggestions from code review

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update docs/feature_tap_dance.md

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

* Update for future

* Update user keymaps for space cadet

* Fix typos

* Clean up tapping term stuff

* Fix compiler issue if NO_ACTION_TAPPING is enabled

Co-authored-by: fauxpark <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-08-29 14:30:02 -07:00
Pete Sevander b0335b2731 Bigger combo index (#9318)
* Add change log

* Change combo index from uint8_t to uint16_t
2020-08-29 14:30:02 -07:00
QMK Bot 9ae15e8c79 format code according to conventions [skip ci] 2020-07-07 21:43:51 +00:00
Dongfeng Yu 666cb44673
Allowing Pressing the Start Buttons Again to Stop Dynamic Macro Recording (#9446) 2020-07-07 21:59:13 +01:00
Drashna Jaelre 98642ca028
Improve keycode handling for RGB (#7677)
Co-authored-by: drashna <drashna@live.com>
Co-authored-by: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
2020-06-22 09:38:58 +01:00
Nick Brassel 3d6d899666
`qmk cformat` (#9500) 2020-06-22 11:21:48 +10:00
Jason Laqua f7eb030e91
Standardize how unicode is processed (fixes #8768) (#8770)
Co-authored-by: Konstantin Đorđević <vomindoraan@gmail.com>
2020-06-18 08:07:34 +01:00
Konstantin Đorđević 94fc32f431
Fix bug in UC_RMOD, add shift and audio support for UC_MOD/UC_RMOD(#8674)
* Invert UC_MOD/UC_RMOD direction when Shift is held

Also use MOD_MASK_SHIFT in process_rgb.c

* Allow audio to be played for UC_MOD, UC_RMOD keycodes as well

* Fix signedness bug in reverse input mode cycling

* Misc formatting in process_unicode_common.c

* Address clang-format issues

* Make decode_utf8 helper function file-local (static)
2020-05-09 01:22:02 -07:00
Konstantin Đorđević bdfdc506da
Rename UC_OSX (and related constants) to UC_MAC (#8589)
* Rename UC_OSX (and related constants) to UC_MAC

* Update UNICODE_SONG_OSX references to UNICODE_SONG_MAC

* Update UC_M_OS references to UC_M_MA

* Add UC_OSX alias for backwards compatibility

* Add deprecation warning for UC_OSX to Unicode docs

* Add UC_M_OS alias for backwards compatibility

* Update newly found UC_M_OS and UNICODE_SONG_OSX references

* Add legacy UNICODE_MODE_OSX alias, revert changes to user keymaps

* Add legacy UNICODE_SONG_OSX alias, revert changes to user keymaps

* Replace removed sounds in Unicode song doc examples
2020-03-31 18:28:43 +02:00
Joel Challis 6ceaae30f5
Run clang-format manually to fix recently changed files (#8552) 2020-03-25 14:39:53 +11:00
Jeremy Bernhardt e5d34fd084
Variable combo (#8120)
* keymap(gergo): colemak

* added flipped numbers

* add STENO_DISABLE_VIRTSER

* add STENO_DISABLE_VIRTSER

* Added GergoPlex and Faunchpad

* push retab

* push retab

* added variable option for combos

* removed accidental commit

* removed accidental commit

* More accidental deletions! (╯°□°)╯︵ ┻━┻

Co-authored-by: Damien Rajon <145502+pyrho@users.noreply.github.com>
2020-03-23 00:17:26 +11:00
James Young 26eef35f07
2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
Ryan bb8d4b4d23
`send_unicode_string()`: Add support for code points > 0xFFFF (#8236) 2020-02-25 12:54:51 +11:00
Ryan 371ff9dd6f
A proper `send_string()` for the Unicode feature (#8155) 2020-02-24 10:27:25 +11:00
Joel Challis 393937b43f
Relocate grave keycode processing (#8082)
* Relocate grave keycode processing

* Tidy up code

* Refactor grave -> grave_esc
2020-02-04 18:49:10 -08:00
Joel Challis 667045b492
Run clang-format manually to fix recently changed files (#7934)
* Run clang-format manually to fix recently changed files

* Run clang-format manually to fix recently changed files - revert template files

* Run clang-format manually to fix recently changed files - format off for ascii_to_keycode_lut
2020-01-19 16:30:34 +00:00
Jeremy Bernhardt d11238f748 switching to you know whats up mode (#7921) 2020-01-17 16:15:58 -05:00
Joel Challis ae40fc498b Relocate RGB keycode processing (#7508)
* Move rgb keycode logic to process_keycode

* Fixes for rgb matrix

* Fixes for mxss

* Fix inc/dec logic, add comments

* Fix return RAINBOW_SWIRL logic

* stop external use of rgb helper functions

* merge fix

* Fix 'defined but not used' when all animations are disabled
2019-12-16 12:27:53 -08:00
Joel Challis efb21c00ce Fix FORCE_NKRO handling (#7601) 2019-12-11 11:39:30 -08:00
Joel Challis d598f01cb7
Relocate magic keycode processing (#7512)
* Move magic keycode processing to own file

* Save some bytes

* Update comments

* Update define to one thats not already used...

* Fix audio
2019-12-03 19:48:55 +00:00
fauxpark 5a6737a778 Send string keycode tweaks (#7471) 2019-11-25 23:16:58 -08:00
zvecr a91c0c4765 Run clang-format manually to fix recently changed files 2019-11-17 08:25:58 -08:00
Drashna Jaelre 542cb0a8ce [Core] Convert Dynamic Macro to a Core Feature (#5948)
* Convert Dynamic Macro to a Core Feature

This imports the code from Dynamic Macro into the core code, and handles it, as such.

This deprecates the old method but does not remove it, for legacy support. This way, no existing user files need to be touched.

Additionally, this reorganizes the documentation to better reflect the changes.

Also, it adds user hooks to the feature so users can customize the existing functionality.

Based heavily on and closes #2976

* Apply suggestions from code review

Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Cleanup based on feedback

* Add short-form keycodes and document them

- add short-form keycodes to quantum/quantum_keycodes.h
- document the new aliases in docs/feature_dynamic_macros.md

* Add Dynamic Macros section and keycodes to docs/keycodes.md

* Make anti-nesting optional

* Add documentation for DYNAMIC_MACRO_NO_NESTING option

* Fix Merge artifacts

* Fix formatting typo in docs

Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>

* Remove DYNAMIC_MACRO_RANGE as it's not needed

* Fix includes and layer var type
2019-11-04 22:59:13 -08:00
Drashna Jaelre e9c44e396d
Smallish overhaul of Auto-Shift feature (#6067)
* Fix edge case when using One Shot Layer with Auto Shift, and it not triggering the cleanup
* Remove junk code (no longer used)
* Replace `(un)register_code` calls with `tap_code` where appropriate
* Fixed up Switch check to be more readable (less verbose)
* Simplified modifier check (if it comes back non-zero, there are mods)
* Add additional function calls for autoshift settings
* Made all variables static, since there are function calls to get their status
* Fixed up documentation
* Re-add special characters that were missed
* formatting pass
2019-11-03 09:52:01 -08:00
Drashna Jaelre 335dd0271e Fix Tap Dance name for consistency and to match docs (#7136) 2019-10-24 20:08:29 +01:00
Drashna Jaelre f069e9fc09
Generalize Tap Dance Layer functions (#6629)
* made tapdance dual_role general

* updated original dual_role functionality

* added toggling layer example

* Fix dual role and add alias

* Update docs about new layer tap dances

* Fix up based on feedback
2019-09-21 11:22:27 -07:00
skullY b624f32f94 clang-format changes 2019-08-30 15:01:52 -07:00
fauxpark 406f03bb0c Mask off TD() parameter properly (#6143)
* Mask off TD() parameter properly

* More parentheses
2019-08-08 14:15:34 -07:00
Zach DeCook 009d45d4d7 MIDI: Fix basic noteon: send correct velocity (#6476) 2019-08-06 11:26:28 -07:00
Drashna Jaelre e5d2cb8f98 Fix Preprocessor check for Leader Keys 2019-07-16 09:27:33 -07:00