According to `helix/rev2/keymaps/fraanrosi/readme.md`, this keymap should be compiled with the following command:
```
make helix/rev2/under:fraanrosi
```
Therefore, when compiling all helix keymaps with the following command, an error occurs when compiling `fraanrosi`.
```
make helix:all
```
Therefore, add `LED_UNDERGLOW_ENABLE = yes` to `keymaps/fraanrosi/rules.mk` to suppress the error.
* Extensible split data sync capability through transactions.
- Split common transport has been split up between the transport layer
and data layer.
- Split "transactions" model used, with convergence between I2C and
serial data definitions.
- Slave matrix "generation count" is used to determine if the full slave
matrix needs to be retrieved.
- Encoders get the same "generation count" treatment.
- All other blocks of data are synchronised when a change is detected.
- All transmissions have a globally-configurable deadline before a
transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms).
- Added atomicity for all core-synced data, preventing partial updates
- Added retries to AVR i2c_master's i2c_start, to minimise the number of
failed transactions when interrupts are disabled on the slave due to
atomicity checks.
- Some keyboards have had slight modifications made in order to ensure
that they still build due to firmware size restrictions.
* Fixup LED_MATRIX compile.
* Parameterise ERROR_DISCONNECT_COUNT.
* cleanup keyboards/helix/{rev2|rev3_5rows}/keymaps/five_rows
* Made the layout data easier to read.
* helix/rev2/keymaps/five_rows/keymap.c
* helix/rev3_5rows/keymaps/five_rows/keymap.c
* The following two were made the same.
* keymaps/five_rows/config.h
* keymaps/five_rows/oled_display.c
The binary of the compilation result has not changed.
* update keyboards/helix/rev2/keymaps/five_rows/rules.mk
KEYBOARD_LOCAL_FEATURES_MK was moved to the end.
* add '#define DISABLE_SYNC_TIMER' into helix/rev3_5rows/keymaps/five_rows/config.h
The sync timer features worsen the matrix scan rate of the Helix keyboard. I'm not sure if it makes sense to have sync timer features enabled on the Helix keyboard. So in my keymap I disable this.
* Latam version of Helix/rev2/back
. Latam adaptation of keymap(whit "ñ")
. 3 layers (Qwerty, Lower, Raise)
. Underglow light changes while pressing Lower(BLUE) and Raise(RED), then it returns to prior mode.
(cherry picked from commit 974be350115b2d33b55edbc02e3b5281e1f856d7)
* Se añade Keymap.
* Agrego un pdf preliminar del mapeo y reubico el keymap a carpeta correspondiente.
* Ajustes en mapeo para simplificar.
Agrego Mark Down con mapeo.
Creo carpeta "layers mapping" para guardar lo correspondiente a mapeo.
* Update keymap.md
* Rename keymap.md to readme.md
* Organización en general y cambio de configuración de "back" a "under"(que era la que correspondía).
.Ahora los leds underglow responden mejor.
* -Se agrega indicador rgb para el bloq mayús.
-Se agrega manejo del rgb_tog.
-Se agrega botón para reset(del teclado).
-Ajustes de keymap varios.
-Limpieza de código.
* Update readme.md
* Update readme.md
* Update readme.md
* adding helix-keyboard.png
* Update readme.md
* -Se agregan Mouse Keys (para manejo del mouse con el teclado).
-Se hace fix en el modo "Bloq. Mayús" (Se persiste el cambio de RGB mode mientras el Bloq. Mayús está activado).
* Cambios en el Keymap para mayor comodidad del uso del mouse.
* Update readme.md
* Update readme.md
* -Fixeo de comportamiento del "Bloq. Mayús":
Cuando se presionaba una Layer mientras estaba activado Bloq. Mayús, quedaba el rgb_mode como el de la capa LOWER o RAISE.
-Ajuste en mapeo:
Cambié las mouse keys y las de teclas de brillo.
* Update readme.md
* Se borra carpeta /rev2_latam, para dejar todo enlatado y andando desde /rev2.
Esto para que el PR solo sea agregar el keymap "fraanrosi".
* Quito cambio de helix.h
Quito lo que ya no es necesario, para hacer el pull request limpio.
* Update Readme.mp
* Revert "Update Readme.mp"
This reverts commit eb9a2712b0f22b44032f5123227b7bc8af37b89f.
* Update readme.md
* Clean up, organization, indent fixes
* Update readme.md
* Latam version of Helix/rev2/back
. Latam adaptation of keymap(whit "ñ")
. 3 layers (Qwerty, Lower, Raise)
. Underglow light changes while pressing Lower(BLUE) and Raise(RED), then it returns to prior mode.
(cherry picked from commit 974be350115b2d33b55edbc02e3b5281e1f856d7)
* Se añade Keymap.
* Agrego un pdf preliminar del mapeo y reubico el keymap a carpeta correspondiente.
* Ajustes en mapeo para simplificar.
Agrego Mark Down con mapeo.
Creo carpeta "layers mapping" para guardar lo correspondiente a mapeo.
* Update keymap.md
* Rename keymap.md to readme.md
* Organización en general y cambio de configuración de "back" a "under"(que era la que correspondía).
.Ahora los leds underglow responden mejor.
* -Se agrega indicador rgb para el bloq mayús.
-Se agrega manejo del rgb_tog.
-Se agrega botón para reset(del teclado).
-Ajustes de keymap varios.
-Limpieza de código.
* Update readme.md
* Update readme.md
* Update readme.md
* adding helix-keyboard.png
* Update readme.md
* -Se agregan Mouse Keys (para manejo del mouse con el teclado).
-Se hace fix en el modo "Bloq. Mayús" (Se persiste el cambio de RGB mode mientras el Bloq. Mayús está activado).
* Cambios en el Keymap para mayor comodidad del uso del mouse.
* Update readme.md
* Update readme.md
* -Fixeo de comportamiento del "Bloq. Mayús":
Cuando se presionaba una Layer mientras estaba activado Bloq. Mayús, quedaba el rgb_mode como el de la capa LOWER o RAISE.
-Ajuste en mapeo:
Cambié las mouse keys y las de teclas de brillo.
* Update readme.md
* Se borra carpeta /rev2_latam, para dejar todo enlatado y andando desde /rev2.
Esto para que el PR solo sea agregar el keymap "fraanrosi".
* Quito cambio de helix.h
Quito lo que ya no es necesario, para hacer el pull request limpio.
* Update Readme.mp
* Revert "Update Readme.mp"
This reverts commit eb9a2712b0f22b44032f5123227b7bc8af37b89f.
* Update readme.md
* Update readme.md
* Clean up, organization, indent fixes
* Update readme.md
Latam version of Helix/rev2/back
. Latam adaptation of keymap(whit "ñ")
. 3 layers (Qwerty, Lower, Raise)
. Underglow light changes while pressing Lower(BLUE) and Raise(RED), then it returns to prior mode.
(cherry picked from commit 974be350115b2d33b55edbc02e3b5281e1f856d7)
Se añade Keymap.
Agrego un pdf preliminar del mapeo y reubico el keymap a carpeta correspondiente.
Ajustes en mapeo para simplificar.
Agrego Mark Down con mapeo.
Creo carpeta "layers mapping" para guardar lo correspondiente a mapeo.
Update keymap.md
Rename keymap.md to readme.md
Organización en general y cambio de configuración de "back" a "under"(que era la que correspondía).
.Ahora los leds underglow responden mejor.
-Se agrega indicador rgb para el bloq mayús.
-Se agrega manejo del rgb_tog.
-Se agrega botón para reset(del teclado).
-Ajustes de keymap varios.
-Limpieza de código.
Update readme.md
Update readme.md
Update readme.md
adding helix-keyboard.png
Update readme.md
-Se agregan Mouse Keys (para manejo del mouse con el teclado).
-Se hace fix en el modo "Bloq. Mayús" (Se persiste el cambio de RGB mode mientras el Bloq. Mayús está activado).
Cambios en el Keymap para mayor comodidad del uso del mouse.
Update readme.md
Update readme.md
-Fixeo de comportamiento del "Bloq. Mayús":
Cuando se presionaba una Layer mientras estaba activado Bloq. Mayús, quedaba el rgb_mode como el de la capa LOWER o RAISE.
-Ajuste en mapeo:
Cambié las mouse keys y las de teclas de brillo.
Update readme.md
Se borra carpeta /rev2_latam, para dejar todo enlatado y andando desde /rev2.
Esto para que el PR solo sea agregar el keymap "fraanrosi".
Quito cambio de helix.h
Quito lo que ya no es necesario, para hacer el pull request limpio.
Update Readme.mp
Revert "Update Readme.mp"
This reverts commit eb9a2712b0f22b44032f5123227b7bc8af37b89f.
Update readme.md
Clean up, organization, indent fixes
Update readme.md
* Changes and corrections were made to Pull Request.
* Since the last change, readme.md and comment in keymap.c were to be updated.
* update keyboards/helix/rev2/keymaps/five_rows/rules.mk: oled selection, led animation selection
* add OLED_UPDATE_INTERVAL support into keyboards/helix/rev2/keymaps/five_rows/oled_display.c
Support for OLED_UPDATE_INTERVAL, even for older types of OLED tasks.
* Add 'HELIX=debug/no-debug' option into 'helix/rev2/keymaps/five_rows/rules.mk'
* update keyboards/helix/rev2/local_features.mk - Improved parsing of the `HELIX =` option
* add 'is_mac_mode()' into keyboards/helix/rev2/rev2.c
* update helix/rev2/keymaps/default/keymap.c: use rgblight query functions
* Makes the OLED driver used by the helix:default keymap switchable.
* use TOP/drivers/oled/oled_driver.c
`make helix:default`
or
`make OLED_SELECT=core helix:default`
* use helix/local_drivers/ssd1306.c
`make OLED_SELECT=local helix:default`
* Separated the OLED related code from keymap.c and moved it to oled_display.c.
* Change the 'led_test' keymap to follow the changes in the 'default' keymap.
* update helix/rev2/keymaps/default/oled_display.c
* add '#define OLED_UPDATE_INTERVAL 50' into keyboards/helix/rev2/config.h
* Support for OLED_UPDATE_INTERVAL, even for older types of OLED tasks
* add readme.md for helix/rev2
* Apply drashna's suggestions to rev2.c.
* Apply drashna's suggestions to rev3_4rows.c, rev3_5rows.c.
Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
* Makes the OLED driver used by the helix:five_rows keymap switchable.
* use TOP/drivers/oled/oled_driver.c
`make HELIX=stdole helix:five_rows`
* use helix/local_drivers/ssd1306.c
`make HELIX=oled helix:five_rows`
* Separated the OLED related code from keymap.c and moved it to oled_display.c.
* scan rate without OLED
* make HELIX=verbose,dispoff,scan helix/rev2:five_rows
use Helix original code
text data bss dec hex filename
18880 58 235 19173 4ae5 .build/helix_rev2_five_rows.elf
matrix scan frequency: 1590
* make HELIX=verbose,dispoff,scan,sc helix/rev2:five_rows
use split_common code
text data bss dec hex filename
18554 40 231 18825 4989 .build/helix_rev2_five_rows.elf
matrix scan frequency: 1202
* scan rate with helix/local_drivers/ssd1306.c
* make HELIX=verbose,dispoff,scan,oled helix/rev2:five_rows
use Helix original code
text data bss dec hex filename
24048 196 342 24586 600a .build/helix_rev2_five_rows.elf
matrix scan frequency: 739
* make HELIX=verbose,dispoff,scan,sc,oled helix/rev2:five_rows
use split_common code
text data bss dec hex filename
23750 176 338 24264 5ec8 .build/helix_rev2_five_rows.elf
matrix scan frequency: 642
* scan rate with drivers/oled/oled_driver.c
* make HELIX=verbose,dispoff,scan,stdole helix/rev2:five_rows
use Helix original code
text data bss dec hex filename
24590 210 798 25598 63fe .build/helix_rev2_five_rows.elf
matrix scan frequency: 293
* make HELIX=verbose,dispoff,scan,sc,stdole helix/rev2:five_rows
use split_common code
text data bss dec hex filename
24290 190 794 25274 62ba .build/helix_rev2_five_rows.elf
matrix scan frequency: 277
* clean up helix/rev2/keymaps/five_rows/keymap.c
* update five_rows/oled_display.c
* update helix/rev2/keymaps/five_rows/keymap.c: remove LAYOUT_kc()
* Ported the keymap from helix/rev2:five_rows to helix/rev3_5rows:five_rows.
* update five_rows/oled_display.c
* add License comment
* Better handle LTO_ENABLE
Especially when calling from command line
* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE
* Remove long for LTO from show_options.mk
* initial commit for froggy 106 key mode
* add mode indicator on OLED
* use #pragma once instead of include guard
* remove unusable codes
* remove audio codes, because helix rev.2 has no audio feature
* use set_single_persistent_default_layer
* remove eeprom update check
* is_master, has_usb() move to rev2.[hc]
* Do recent helix/rev2 changes to helix/pico as well.
helix/pico/matrix.c: remove 'is_master'
helix/pico/pico.c: add 'is_master'
helix/pico/pico.h: add 'has_usb()' macro
helix/pico/split_util.c: remove 'setup_handedness()' 'has_usb()', add 'is_helix_master()' etc
* add HELIX=scan option into {rev2/pico}/local_features.mk
Made DEBUG_MATRIX_SCAN_RATE easy to use.
* Changed rules.mk to link "helix/local_drivers/ssd1306.c" only when OLED_ENABLE = yes.
* Added option to use split_common for helix/rev2, helix/pico keyboard.
how to build:
### build helix/pico (HelixPico) with helix current codes
$ make helix/pico:KEY_MAP
$ make helix/pico/back:KEY_MAP
### build helix/rev2 (Helix or Helix beta) with helix current codes
$ make helix:KEY_MAP
$ make helix/rev2/back:KEY_MAP
$ make helix/rev2/under:KEY_MAP
$ make helix/rev2/oled:KEY_MAP
$ make helix/rev2/oled/back:KEY_MAP
$ make helix/rev2/oled/under:KEY_MAP
### build helix/pico (HelixPico) with split_common codes
$ make helix/pico/sc:KEY_MAP
$ make helix/pico/sc/back:KEY_MAP
$ make helix/pico/sc/under:KEY_MAP
### build helix/rev2 (Helix) with split_common codes
$ make helix/rev2/sc:KEY_MAP
$ make helix/rev2/sc/back:KEY_MAP
$ make helix/rev2/sc/under:KEY_MAP
$ make helix/rev2/sc/oled:KEY_MAP
$ make helix/rev2/sc/oledback:KEY_MAP
$ make helix/rev2/sc/oledunder:KEY_MAP
* add matrix_slave_scan_user() to helix/rev2/rev2.c, helix/pico/pico.h
* Changed 'helix:xulkal' to always use split_common and removed ad hoc code.
Added the following line to 'helix/rev2/keymaps/xulkal/rules.mk':
SPLIT_KEYBOARD = yes
Removed the following ad hoc code from 'users/xulkal/custom_oled.c':
#if KEYBOARD_helix_rev2
extern uint8_t is_master;
bool is_keyboard_master(void) { return is_master; }
#endif
* add '#define DIODE_DIRECTION COL2ROW' into helix/{rev2|pico}/config.h
This commit does not change the build result.
* update helix readme
* keyboards/helix/readme.md
* keyboards/helix/pico/keymaps/default/readme.md
* keyboards/helix/rev2/keymaps/default/readme.md
Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
* add RGBRST key into helix/pico:default keymap ADJUST layer
* update helix/rev2:default keymap's OLED display contents
* add RGBRST key to HELIX_ROWS == 4 ADJUST layer
* add CAPS key to RAISE, LOWER layer
* add layer status display on slave side oled
* add RGB LED status display on both side oled
* save stack memory size
* Remove keymap_config extern from default keymaps
* Revert unicode
Apparently VSCode does not like unicode, I didn't actually edit these lines, so it must have been automatic... :(
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* add temporary test shell-spript
* Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization
No change in build result.
* Helix config.h use '#pragma once'
No change in build result.
* Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once'
No change in build result.
* Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h
No change in build result.
* remove keyboards/helix/{rev2|pico}/serial_config.h
No change in build result.
* 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h.
No change in build result.
* The contents of helix/rules.mk were distributed to subdirectories.
This is a preparation to create a new subdirectory for helix code using split_common.
No change in build result.
remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk.
follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk.
----
SRC += i2c.c
SRC += serial.c
SRC += ssd1306.c
CUSTOM_MATRIX = yes
---
* helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/
No change in build result.
* Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK.
No change in build result.
* add keyboards/helix/pico/local_features.mk
* add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk
* remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk
* remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk
* remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk
* add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk
* Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK.
No change in build result.
* add keyboards/helix/rev2/local_features.mk
* add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk
* remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk
* remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk
* remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk
* add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk
* Added helix keyboard build NEW method.
No change in build result.
## Helix build
$ make helix:default ## no oled, no backlight, no underglow
$ make helix/rev2/back:default ## no oled, with backlight, no underglow
$ make helix/rev2/under:default ## no oled, no backlight, with underglow
$ make helix/rev2/oled:default ## with oled, no backlight, not underglow
$ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow
$ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow
$ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow
$ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow
## Helix pico build
$ make helix/pico:default ## no oled, no backlight, no underglow
$ make helix/pico/back:default ## no oled, with backlight, no underglow
$ make helix/pico/under:default ## no oled, no backlight, with underglow
$ make helix/pico/oled:default ## with oled, no backlight, not underglow
* add temporary test shell-spript
* test end remove test script. Revert "add temporary test shell-spript"
This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657.
* test end remove test script. Revert "add temporary test shell-spript"
This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed.
* Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'.
No change in build result.
* update keyboards/helix/{rev2,pico}/keymaps/default/readme.md
* rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk
* update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md
* rm keyboards/helix/pico/oled/rules.mk
* update helix's readmes. All the ':avrdude' was replaced with ':flash'.
* remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk
No change in build result.
* Remove QUANTUM_DIR code blocks from keyboard rules
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect entire keyboards.
* remove QUANTUM_DIR code blocks from rules for default keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect default keymaps.
* remove QUANTUM_DIR code blocks from rules for user keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect "user" keymaps. (It's actually any keymap
that isn't named `default`.)
* remove QUANTUM_DIR code blocks from rules for community layouts
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for community layouts.
* remove QUANTUM_DIR code blocks from rules for userspaces
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for userspaces.
* helix/serial.c add support PD1,PD3,PE6 and configuration simplify
* Add comment about ATmega32U4 I2C
* Add compile time check for ATmega32U4 I2C
* change TAB code to 8 SPACE code
* Helix serial.c PORTD,PD0 test. OK
OK PD0
- PD1
OK PD2
- PD3
- PE6
* Helix serial.c PORTD,PD1 test. OK
OK PD0
OK PD1
OK PD2
- PD3
- PE6
* Helix serial.c PORTD,PD3 test. OK
OK PD0
OK PD1
OK PD2
OK PD3
- PE6
* Helix serial.c PORTE,PD6 test. OK
OK PD0
OK PD1
OK PD2
OK PD3
OK PE6
* Helix serial.c: PD0,PD1,PD3,PE6 all test end
* Helix serial.c: rename SOFT_SERIAL_PORT to SOFT_SERIAL_PIN
* Helix serial.c add debug code
* Helix serial.c: add transaction ID range check
* Helix serial.c debug code update
* Helix serial.c debug code update
* Helix serial.c: Strict checking of the value of tid.
* adjust the delay of serial.c
* Helix serial.c: remove debug code
* remove EXTRAFLAGS += -DCONSOLE_ENABLE from five_rows/rules.mk
tmk_core/common.mk has
>ifeq ($(strip $(CONSOLE_ENABLE)), yes)
> TMK_COMMON_DEFS += -DCONSOLE_ENABLE
* Fix error handling in split_scomm.c
* add some comment to serial.c
* add some comment about SELECT_SOFT_SERIAL_SPEED
* Helix each keymap's using rgblight mode symbol instead magic number
No change in build result.
* Helix pico keymaps: make rgblight modes selectable.
No change in build result.
* Helix rev2 keymaps: make rgblight modes selectable.
No change in build result.
* fixed Helix froggy/keymap.c: invalid rgblight mode value 0 to 1 (=RGBLIGHT_MODE_STATIC_LIGHT)
* Deselect RGB_TEST and ALTERNATING in Helix rev2,pico keymaps config.h.
* Helix: make rgblight modes selectable.
No change in build result.
* edit the comment of helix/rev2/keymaps/default/keymap.c
* Helix led_test keymap: reduced the size.
* add change_reciver2sender()/change_sender2reciver()
This is a change to improve readability.
* txled, rxled off in matrix_init()
* add serial_send_packet() / serial_recive_packet()
This is a change to reduce object size.
* add serial_low() at ISR() top
* add __attribute__((always_inline)) to some functions
* modify serial_send_packet()/serial_recive_packet()
A little, object size reduction.
A little, speedup.
* add debug code to helix/serial.c
* Adjust sampling timing of serial signal being received
* add split_scomm.c/split_scomm.h and change serial.c/serial.h
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
* add split_scomm.c/split_scomm.h into helix/rev1
* reduce object size helix/rev2/matrix.c
* remove checksum check, add parity check
* force occur parity error for test
* parity test ok. remove test code
* change some comment & add skip code when buffer_size == 0
* serial.c: multiple types of transaction support
Add 4 bits transaction-type field at packet top.
Select Transaction Descriptor Table entry by transaction-type.
* helix serial master-slave transaction optimize
Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized.
* add debug code for retry
* add comment into each config.h
* fix ISR status drop
* add a debug macro 'debug_retry_chg()'
* reduce led_test size
* remove debug code from helix/serial.c and etc.
* helix:five_rows change TAPPING_TERM value 140
* Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement.
- The difference with the original let's split's serial.c
- It's high-speed about 4 times.
- Stable bi-directional data transfer. (Helix need master to slave transfer)
- serial.h was divided 2 files, serial_config.h and sereial.h
- With multiple types of transaction support, communication contents can be optimized. (NEW flexible API)
- USE OLD Simple APIs (compatible with let's split serial.c)
- files :
- serial_config.h -- hardware configuration (need include by config.h)
- serial.c/serial.h -- serial communication
- USE NEW flexible APIs. (Support multi-type transaction function.)
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
- files
- split_scomm.c -- communication buffer is defined in here. call by matrix.c.
- split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c
- serial_config.h -- hardware configuration (need include by config.h)
To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION
- serial.c/serial.h -- serial communication lower layer
- NEW APIs for serial.c / serial.h (The lower layer)
// Soft Serial Transaction Descriptor
typedef struct _SSTD_t {
uint8_t *status;
uint8_t initiator2target_buffer_size;
uint8_t *initiator2target_buffer;
uint8_t target2initiator_buffer_size;
uint8_t *target2initiator_buffer;
} SSTD_t;
// initiator is transaction start side
void soft_serial_initiator_init(SSTD_t *sstd_table);
// target is interrupt accept side
void soft_serial_target_init(SSTD_t *sstd_table);
int soft_serial_transaction(int sstd_index);
int soft_serial_get_and_clean_target_status(int sstd_index);
- NEW APIs for split_scomm.c / split_scomm.h (The upper layer)
move from old serial.c the following buffer and functions
serial_slave_buffer[]
serial_master_buffer[]
void serial_master_init(void)
void serial_slave_init(void)
int serial_update_buffers(void)
define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h
QMK Bot
Takeshi ISHII
Ryan
Nick Brassel
Ryo Maeda
Franco Rosi
MakotoKurauchi
James Young
Drashna Jaelre
MURAMATSU Atshshi
Yasuhiro SHIMIZU
XScorpion2
Konstantin Đorđević
marksard