* Add my own keymap
* Layer 0: Workman
* Layer 1: RSTHD (my own take on it)
* Layer 2: Mouse
* Layer 3: Navigation
* Layer 4: Symbols right
* Layer 5: Symbols left
* Layer 6: Fn keys
* Layer 7: Numbers
* Layer 8: Vim and misceallaneaous accessible from any other layer
* Move the current code to a 0.1 folder in preparation for upcoming changes
Version 0.2 is currently being prototyped and uses an arm chip which
will need its own firmware.
There is also the Ferris sweep which uses a pro-micro compatible board
which will need its own directory.
* Move Ferris out of handwired and into the light
The keyboard is now well out of the prototype phase as tens of them have
been produced and acquired by various people.
With 0.2 coming out, adoption is going to increase again as the board
will be available for sale at some recognized vendors.
Now is probably a good time to recognize its status as more than a
prototype :)
* Add code for the Ferris Sweep (a.k.a cradio)
The Ferris Sweep is a creation of the talented @davidphilipbarr, a.k.a DPB.
It has the key layout of a Ferris and uses a pro-micro connected to the
switches via direct pins so that diodes are not needed and the soldering
is minimal.
With their blessing, I took the code for it from DPB's own repo:
https://github.com/davidphilipbarr/36keys/tree/master/qmk/cradio
and did some adaptations such as removing commented out code, enabling
EE_HANDS and mouse keys for consistency with my existing Ferris code.
* Fix indentation in rules.mk
* Fix indentation in sweep's config
* Remove unnecessary lines from sweep's rules.mk
* Remove unnecessary lines from sweep's rules.mk
* Rename 0.1 to 0_1
This avoids the dot looking like the separation between a filename and
its extension.
In the same commit, bring matrix.c to the 0_1 folder as this was needed
for the code to compile properly (matrix.c is referred to in the readme
under `0_1` and is specific to that revision of the firmware).
* Update copyright statements for Sweep
* add kabraxcis keymap
this is a user keymap for a member of my group-buy. this is the creation commit
* add voaraq keymap
this is a user keymap for a member of my group-buy
* update kabraxcis keymap
* add licenses
* basic keys working
* more stuff
* more stuff
* empty upper layers
* more stuff
* cleanup
* more stuff
* add the letter 'j'
* add '0' to layer 4
* implement umlauts and eszett with menu key as compose key
* add comment
* renamed layout
* change copyright notice
* add separate readme file
* Add Launchpad keymap
Note: RGB and Audio won't work when using B pins for audio
* Add support for rgb matrix on launchpad
* Update config for launchpag
* Disable wait on layer change
* Update config for ErgoDox EZ
* Fixup rgb light userspace code
* Move Corne layout to community layouts folder
* Update config for corne to support community layouts
* Add license header to files
* Minor cleanup of userspace config
* Update Pimironi Trackball code
* Increase debounce time on ergodox
* Fix keymap handling
* Enable wait for USB for moonlander
* Update/add license headers
* fix review issues
* added spooky keyboard t
o boardsouce folder
* restoring to clean start I think
* added back in my files for this keyboard
* Update keyboards/boardsource/holiday/spooky/config.h
* Update keyboards/boardsource/holiday/spooky/keymaps/rip_mx/keymap.c
* Update keyboards/boardsource/holiday/spooky/readme.md
* Update keyboards/boardsource/holiday/spooky/spooky.h
* updated all keymaps to support 2x3 ortho
* Apply suggestions from code review
* move drakon to jagdpietr directory
* Updates
Recommended changes implemented in this commit due to progress loss in last commit
* Update vusb
* Update keyboards/jagdpietr/drakon/drakon.c
* Add nordic keymap
Changes from default:
- Change button right of `LSHIFT` to `KC_NUBS`
- Add some more keys to the second layer.
* Add sleepmode functionality
Added a sleepmode, this turns of the rgb_matrix if no key was pressed for x minutes. Not default on, so you have to enable it by defining `SLEEPMODE_ENABLED`.
* Move all sleepmode config to config.h, rename keymap
- Move all configurations for sleepmode to keymap config.h
- rename keymap to include reference to it having sleepmode (suggestion from guy the discord-server)
- add copyright in config.h
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/config.h
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* [Keyboard] Support MJ64 which is a 60% Hotswap RGB keyboard with arrows
and the size of left shift is 2.25U
* Update keyboards/melgeek/mj64/mj64.h
* Update keyboards/melgeek/mj64/keymaps/default/keymap.c
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/keymaps/default/keymap.c
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/rev2/rules.mk
* Update keyboards/melgeek/mj64/rev1/rules.mk
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/info.json
* Update keyboards/melgeek/mj64/info.json
* Update keyboards/melgeek/mj64/rev1/config.h
* Update keyboards/melgeek/mj64/rev2/config.h
* Update the VID and PID in mj64/config.h
add the rev1/rev1.c
add the rev2/rev2.c
* [Keyboard] GH60 v1.3 Support
* clean up info.json
Update key sizes and positioning.
* add readme
* add image to readme
* fix up info.json LAYOUT_all
* add LAYOUT_60_ansi
I'm guessing at this based on a photo of the PCB. Chances are high that this isn't fully functional.
* add matrix block comment to v1p3.h
* add default_ansi keymap
* add keymap readme files
* fix LAYOUT_60_ansi macro
* enable 60_ansi Community Layout support
* add layouts for 60_ansi_arrow
Add LAYOUT_60_ansi_arrow and LAYOUT_60_ansi_arrow_split_bs macros. (The user helping me test runs the split Backspace variant.)
* add Tsangan, HHKB, and 64_ansi layout macros
* add factory keymaps and layout info
* update copyright headers
I mean... if someone's gotta "own" this code...
* fix broken factory_* keymaps
* Add Z70Ultra which is a Hotsawp RGB 65% keyboard
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
* Update info.json
update the name of layout to consistent the keyboard.
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra
* Support Z70Ultra
[Modified] info.json to support two different layouts
[Add] rules.mk to support default folder
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* remove excessive arguments from LAYOUT_split_space
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Use macro replace with the literal for CS & SW
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add GPL for files
* Update keymaps/default/keymap.c
* Update keymaps/via/keymap.c
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add VIA code to ergoTravel, VendorId changed to allow via
* Update LTO_ENABLE for via
* Accept comments from the QMK PR discussion
* Restore original rules.mk from qmk master, update via rules to remove redundant bootmagic
* rules update
* find and use unique VID without qmk. Used 0x4A50, did not find clash
* Removed unused via layer
* Reset hard to last clean commit, redo changes for Hex Translation and Enum
* on behalf of VashtaNerada commiting his code to get caps lock led working on the soldered E8d E8.5
* Update keyboards/exclusive/e85/soldered/soldered.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Add VIA keymap for EVE Meteor.
* Remove bootmagic flag and add vendor/product IDs.
* Update keyboards/eve/meteor/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Increment EVE Vendor ID to be unique.
* Change product IDs.
Make the EVE Meteor IDs both unique and somewhat logical based on the product name.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add VID/PIDs to ErgoDox EZ
* Add VID/PIDs for Planck EZ and Glow revision
* Make names consistent
* fix typo in docs
* Move LED config back, for maximum compatibility
* Add revisions for ErgoDox EZ boards
* Fix embarassing typo
* Typooooo
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update Licensing info
* Update Moonlander default keymap to match Oryx's default
* Fix formatting based on suggestions
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Make indicator LEDs more configurable
* Update default keymap
* Handle older eeprom settings
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* [Keyboard] Support MJ63 which is a 60% hotswap RGB keyboard with arrows
and the size of left shift is 2U
* Update keyboards/melgeek/mj63/mj63.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/rev1/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/mj63.c
Co-authored-by: Joel Challis <git@zvecr.com>
* [Keyboard] MelGeek MJ63
* Change the VID and PID
* move the mj63.c to the rev1/rev1.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Initial support for the Keyboardio Atreus
Many thanks to noroadsleft for reviews & suggestions.
* Add QMK Configurator layout support
* Update the fn layer of the Keyboardio Atreus to the new layout.
Previously this was using the Classic Atreus layout.
* Implement noroadleft's changes from #8492
* Follow Erovia's recommendations
qmk/qmk_firmware#8492
* Correct braces
* Change correct rules.mk
* Remove comments
* Fix BOOTMAGIC_ENABLE
I had edited the wrong file earlier.
* Remove comment
* Updates rules.mk
Thank you noroadsleft.
Co-authored-by: Gergely Nagy <algernon@keyboard.io>
Co-authored-by: Phil Hagelberg <phil@hagelb.org>
* Move existing files out the way
* Convert to community layouts
* Add smk65/revf support
* Disable stuff by default
* Update IDs for via
* Align LAYOUT macros for community layouts
* Align LAYOUT macros for community layouts - Fix configurator ordering
* Update via keymap
* remove stub _kb function
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add niu mini dye sub keymap
* Fix spacing
* Fix for blank spacing on layout
* Remove unused code
Co-authored-by: Joel Challis <git@zvecr.com>
* Remove audio and console settings
Co-authored-by: Joel Challis <git@zvecr.com>
* Updates rules and readme
* Add license GPL2 to keymap
Co-authored-by: Joel Challis <git@zvecr.com>
* Clean LeftyNumpad code
* Fix typo in recently renamed file
* Fix issues with keymap layout
* Initial PR Feedback fixes
* Update keyboards/handwired/leftynumpad/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/leftynumpad/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add fixes based on PR feedback
* Update keyboards/handwired/leftynumpad/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* add maja capslock indicator
add maja capslock indicator
* Update keyboards/kbdfans/maja/maja.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Basic keymap parsing finally works
* Add 'keymap.json' creation to the qmk.keymap module
* Add tests and fix formatting
* Fix/exclude flake8 errors
* Convert keymap.c to valid keymap.json
* Fix some errors
* Add tests
* Finalize keymap.json creation, add json template
* Add docs
* Move pygments to the standard requirements
* Add support for nameless layers, fix tests
* Fix things after rebase
* Add missing 'keymap' value.
* Fix missing layer numbers from advanced keycodes
Buckwich noticed that if the advanced keycode / layer toggling key
contains a number, it goes missing.
Now we properly handle them.
Thx for noticing!
* Apply suggestions from code review
* fixup tests
Co-authored-by: Zach White <skullydazed@drpepper.org>
Co-authored-by: skullY <skullydazed@gmail.com>
* Move my custom functions and keymaps to userspace to be able to add the STM32F411 variant of my keyboard with mostly the same functionality
* Move keymaps to community layouts
* Remove keymaps from userspace readme.md
Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>
* add support for ymd75 rev3
* Update keyboards/ymd75/rev3/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ymd75/rev3/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* remove DESCRIPTION
* only apply offset for rev3
Co-authored-by: Ryan <fauxpark@gmail.com>
* Created folder structure and blank files
* Update the yugo_m initial blank files
* Add yugo_m default keymap
* Update yugo_m info.json
* Fix yugo_m keymap.c
* keymap.c update
* Changed subfolder name
* File names
* Fixed lock LEDs problem
* Returned old subfolder name; LEDs fix
* Activated anti-ghosting feature in config.h
* Update readme.md
* Changed LAYOUT to LAYOUT_all
* Updated keymap.c
* corrected LAYOUT to LAYOUT_all in info.json
* Rewritten readme.md according to the template
* Removed backslashes from keymap.c
* Fixed readme.md
* Fixed readme.md again
* Tidying up readme.md
* Tidying up comments and readme.md
* Removed a line from rules.mk
* Update keyboards/yugo_m/model_m_101/model_m_101.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Removed chconf, halconf, mcuconf
* Updated LED control
* Update keyboards/yugo_m/model_m_101/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/yugo_m/model_m_101/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/yugo_m/model_m_101/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/yugo_m/model_m_101/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/yugo_m/model_m_101/model_m_101.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/yugo_m/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Updated readme.md, there was an outdated info
* Update keyboards/yugo_m/model_m_101/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/yugo_m/model_m_101/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/yugo_m/model_m_101/model_m_101.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/yugo_m/model_m_101/model_m_101.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Nidzo Tomic <tomicn8@hotmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* First pass at manuform layout.
* Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer.
* Use a 32-bit timer that can actually hit 5 minutes.
* Some updates after a day of usage:
* Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes.
* Turn off the OLEDs after 5 minutes
* Move the keys around a bit.
* Add many more quotes.
* Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots.
* Revert osm on lgui as it makes start menu search impossible to use.
* Use LTO_ENABLE flag.
* License all of my (333fred's) keymaps as MIT.
* Update users/333fred/rgb.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initializing Boardwalk layout
* rules.mk newline
* config.h newline
* qwerty num toggle -> tap-toggle
* errant K, and _LOWER momentary toggles
* Lack of autosave sucks
* Converting to HHKB layout
* TT(_NUM) added to num layer
* Final updates for Boardwalk initialization
* Final refinements
* newline
* Removal of extra includes
* Update keyboards/boardwalk/keymaps/niclake/config.h
#pragma once
* Removing comment block from rules
* Updates to my layout
* WIP working on new keymap
* tweaking keymap
* updated keymap
* cleaned up a little bit
* New preonic keymap
* my preonic keymap
* added mac layout
* preonic map update
* cleaning up old repo
* cleaning up to match upstream
* more cleanup
* removing old keymaps
* Added BM60 Poker
* Apply suggestions from code review
* Added license
* updated license
* updated license
* Fixed remaining licenses and added layout to rules
* added replacement pcb for the matrix cain keyboard
* update usb descriptor
* fixed led polarity
* Update keyboards/matrix/cain/cain.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/matrix/cain/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* rename from cain to cain_re
* Update keyboards/matrix/cain_re/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* BM60RGB ISO: fix and extend default keymap
- correctly assigns the Non-US Backslash and Hash keys
- adds Function and Navigation keys
- use KC_GESC instead of KC_ESC to make Grave accent available
* Update layout macro
The layout is the ISO equivalent of QMK's `LAYOUT_60_ansi_arrow`.
* Add via configurator support
* Remove layers to fix via
* Re-add extra via layers since it seems to work now
* Replace tabs with spaces
* Update readme.md
* first pass at fixing the key labeling
* second pass of fixing key labeling
* third pass of this key naming
* another pass of changing key naming
* another pass
* another pass
* another pass
* renamed it all
* give a good vid and pid
* add via keymap
* add on to the comments
* update readme and comments
* one more small change
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Danny <nooges@users.noreply.github.com>
Co-authored-by: Adam Gwilliam <agwilliam@yaharasoftware.com>
* Convert ErgoDox EZ to lite matrix
* Add initial config from Dactyl config
Based on ErinCall's work to generalize the mcp i/o expander matrix code
* formatting
* Fix number of pins
* Remove unused defines
* fixed keymap placement
- online configurator keys were in the wrong location and needed to be fixed
- fixed a key being to high on the y position
* Create rules.mk
* Create keymap.c
* Update rules.mk
added VIA support
* Changed wazowski via keymap to include skipped switch
* changed the vendor ID
* Update keyboards/keebzdotnet/wazowski/config.h
* Removed VIA enable from keyboard rules.mk
* Update keyboards/keebzdotnet/wazowski/rules.mk
* Fixed wazowski via keymap build errors
* Added multi-layer support for Wazowski via keymap
* Initial Commit for Ploopyco Trackball
This is a WIP at this point. Most of it compiles, but the SPI commands are non-functioning as they come from Arduino, so don't exist in LUFA
* Convert SPI commands from arduino to LUFA
But I have no idea if this is actually correct or not
* Update keyboard readme
* Clean up ploopyco trackball
* Update readme
* Update mouse key stuff
* last minutue cleanup
* Add caveat about scroll wheel
* Fixup to code
* Additional fixup
* Add movement multiplier
* Rename folders
* mid changes
* temp
* Got it working!!!!!
* Additional cleanup of code
* Make unused pin calls more compact
* Rotation info
* Add debouncing checks
* Make everything replaceable
* Add info.json
* Include ISP flashing info
* Better handling for user customization
* Reconfigure CPI stuff
* fix issues with debug printing
* Fix tiny scroll issue
* Add and update scroll code from ploopy mouse
* Update licensing
* Add PloopyCo Mouse
* Cleanup and layout stuff
* Move common files to main folder for reuse
* Increase polling rate
* Update image for mouse
* Apply changes from code review
* Add VIA support
* edit vid and pid
* add VIA keymap
* add my name to the readme
* Update keyboards/gray_studio/hb85/keymaps/via/config.h
* we have a third endpoint, no need to disable mousekeys
* Update keyboards/gray_studio/hb85/keymaps/via/keymap.c
* add license header
* Create keymap.c
* Add files via upload
* Added files for handwired 3d printed clueboard 660
* create via layout files
* added layout files for via
* updated product ID to fix id conflicts
* change product ID to fix ID conflicts.
* fixed capitalization error that was causing issues
* fixed capitalization issues.
* fix syntax errors
* Fixed syntax errors (stray punctuation)
* Compatibility fixes
* Compatibility fixes
* Compatibility fixes
* Compatibility fixes
* capitalization fixes
* Compatibility fixes
* Compatibility fixes
* Compatibility Fixes
* Compatibility fixes
* Compatibility fixes
* Compatibility changes
* upkeep, fixing typos
* Update keyboards/handwired/3dp660/config.h
Removed Description line
* Update keyboards/handwired/3dp660/rules.mk
correct bootloader
* Update keyboards/handwired/3dp660/3dp660.h
fix case sensitive typos
* Update keyboards/handwired/3dp660/keymaps/default/keymap.c
change tab indentation to space indentations.
* Update keyboards/handwired/3dp660/keymaps/via/keymap.c
change tab indentations to space indentations
* Delete 3dp660.json
This file was for VIA, and shouldn't be in this repo. I placed it here so I wouldn't misplace it in my filesystem. My apologies.
* Update info.json
change suggestions to other file said to lowercase "ansi", caused reference issues, changed all instances of "ANSI" to "ansi".
* Update keymap.c
change suggestions to other file said to lowercase "ansi", caused reference issues, changed all instances of "ANSI" to "ansi".
* Update keymap.c
more capitalization fixes
* Update keyboards/handwired/3dp660/readme.md
shortened imgur url
* Update keyboards/handwired/3dp660/rules.mk
remove extraneous comments
* Delete config.h
* Update keyboards/handwired/3dp660/rules.mk
* Update 3dp660.c
add license headers to all .c and .h files
* Update 3dp660.h
added license header to all .c and .h files.
* Update keymap.c
added license header to all .c and .h files.
* Update keymap.c
added license header to all .c and .h files.
* Update keyboards/handwired/3dp660/readme.md
Add maintainer URL
* Update keyboards/handwired/3dp660/keymaps/default/keymap.c
remove extraneous default keymap layers
* Update keyboards/handwired/3dp660/keymaps/default/rules.mk
* Update rules.mk
Moved LTO to keyboard level.
* Update rules.mk
Moved LTO to keyboard level.
* Delete rules.mk
Made obsolete by LTO move to keyboard level.
* Update keyboards/handwired/3dp660/rules.mk
capitalization errors.
* Apply suggestions from code review
Housekeeping, changing code for readability.
Adding my kbd67mkii keymap and some changes to kumo
Keymaps for kbdfans/kbd67/mkii_soldered and thevankeyboards/minivan
* Changes to minivan layout
* KBD67 keymap
* commiting my files
* Squashing commits - adding preonic keymap
This adds a custom keymap, including numpad layer, emoji, and kamoji
key mappings.
* Removing unnecessary trailing backslash characters
* removing the unnecessary json keymap
* removing unnecessary trailing slashes from the default keymap
* switching to tap_code
* Apply suggestions from code review
This should enable a toggleable numpad
* adding license
* Stripping out FN keycodes in favor of a momentary layer
Fix configs to make the `handwired/onekey/blackpill_f401:backlight` and
`handwired/onekey/blackpill_f411:backlight` examples actually compile
and work:
- Use `PWMD5` instead of `PWMD2` for backlight, which matches the
default value of `BACKLIGHT_PAL_MODE` (AF02 for pin A0 is `TIM5_CH1`)
and does not conflict with the default value of `STM32_ST_USE_TIMER`.
- Enable `HAL_USE_PWM` in halconf.h and `STM32_PWM_USE_TIM5` in
mcuconf.h, so that `PWMD5` could be used.
* add miniMACRO5
add all nessecary files for the miniMACRO5
I have rewritten the readme, and changed the keymaps to be more simple. I have tested compiling, and everything works perfectly.
* update miniMACRO5 readme
add the make example into the readme file
* Update keyboards/minimacro5/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/minimacro5/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/minimacro5/keymaps/media/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/minimacro5/keymaps/media/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/minimacro5/minimacro5.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/minimacro5/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
applied all suggestions.
Co-authored-by: Ryan <fauxpark@gmail.com>
* drashna suggestions - enum rather than define
committed enum update by drashna
Co-authored-by: Drashna Jaelre <drashna@live.com>
* update keymap.c
incorrect brackets
Co-authored-by: dezli <m@dez.li>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Adding preonic layout
* deleting unnecessary files
* Fixing spacing
* I need to not commit things while I'm not sober
* Update keyboards/preonic/keymaps/codecoffeecode/keymap.c
* Update keyboards/preonic/keymaps/codecoffeecode/keymap.c
* Update keyboards/preonic/keymaps/codecoffeecode/keymap.c
* Adding license header
The default keymaps don't make use of the global `keymap_config`
variable nor the `matrix_*_user()` functions. Therefore, remove them to
avoid confusion for future keymap authors.
* update "Hardware Availability"
* add a section of "How to build"
* update "Hardware Supported"
* add VIA keymaps
* add 2 layers to VIA keymaps
Co-authored-by: keyaki-namiki <28521374+keyaki-namiki@users.noreply.github.com>
There is no way to invoke the command feature while having just a single
physical key, and disabling that feature fixes build for keymaps like
`handwired/onekey/promicro:rgb` without resorting to LTO (the command
feature consumes more than 4900 bytes with avr-gcc 8.4.0).
* KBD67 MkII Soldered: Fix ISO blocker layout
Matrix data was wrong; KC_NUHS key did not work.
* KBD67 MkII Soldered: Add ISO blocker with Split Backspace layout
* Add Torn keyboard
* Apply suggestions from code review
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Remove via json file
* Add mcp23081_pin_t
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Richard Titmuss <richardt@spotify.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Adds pagondel layout for dz65rgb v2
* Adds license information
* replaces define by enums
* Update license year
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update config.h
adding vendor and product info so VIA will recognize it.
* Update keyboards/kingly_keys/romac_plus/config.h
thank you for this. commiting suggestion.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* 6.25U bottom row ISO layout for Matrix Noah
* Personal map for Matrix Noah using new 6.25U bottom row ISO
* Switch to 65_iso_blocker and add that to info.json
* Switch to 65_iso_blocker for the new layout
* Fix whitespace issues
* Meridian initial commit
* requested changes
* Update keyboards/primekb/meridian/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/primekb/meridian/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* made requested changes
* Update meridian.c
* Update keyboards/primekb/meridian/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* initial keymap commit
* Keymap for coppertop commit
* removed define for layers/kc_no/kc_trns
* Modified keymap to remove definitions and add layer enum
* initial keymap commit
* Keymap for coppertop commit
* removed define for layers/kc_no/kc_trns
* Modified keymap to remove definitions and add layer enum
* Changed KC_NO and KC_TRNS to 7X and 7_
* Fixed spacing on keymaps
* TMO50: use layer_state_set_kb at keyboard level (#10150)
* Change TMO to use layer_state_set_kb as is customary at the keyboard level.
This also factors out `process_indicator_led` to a separate method.
* [Keymap] update dz60:mrsendyyk (#10160)
Update DZ60 Personal readme.md and keymap.c
* Update readme.md
* Update keymap.c
* Update keymap.c
* Update readme.md
* Update readme.md
* Update readme.md
* Update keymap.c
* Update readme.md
* Update
* Update readme.md
* Update keymap.c
* Update readme.md
* [Keyboard] YMDK NP21 refactor (#10181)
* [Keyboard] 1upkeyboards/1up60rgb: fix broken Enter (#10188)
The recent change to unnest macros put the enter on the wrong matrix key. On the 1uprgb, the ANSI and ISO enters share the same cell as does the ANSI and ISO backslash.
* no idea what this is
* Update keyboards/dz60/keymaps/coppertop/keymap.c
* Update keyboards/dz60/keymaps/coppertop/keymap.c
* Update keyboards/dz60/keymaps/coppertop/keymap.c
* Update keyboards/dz60/keymaps/spotpuff/keymap.c
* Update keyboards/dz60/keymaps/spotpuff/keymap.c
* Update keyboards/dz60/keymaps/spotpuff/keymap.c
* Added Trns labels to keymap comments.
* Revert "no idea what this is"
This reverts commit dd950f9eb3bad365961d2aa6c97c9dfbdd6219db.
* Reverted dd950f9eb3bad365961d2aa6c97c9dfbdd6219db
* fix vusb submodule
* Update keyboards/dz60/keymaps/coppertop/rules.mk
* Update keyboards/dz60/keymaps/spotpuff/rules.mk
* Update users/spotpuff/rules.mk
* Added GNU copyright license text
* [Keyboard] Convert Corne Keyboard to Split Common
* Add VIA Support
* Makes sure that ol(e)d and new OLED implementation can't coexist
* Add licensing header to files
* Add changes based on feedback from foostan
* Fixes
* add via support for boardsource/5x12
* make product id for 5x12 unique (there is already an 0x0512) by setting it to 0x5012
* un-swap the readme's for 3x4 and 5x12
* Update keyboards/boardsource/5x12/config.h
update vendor id
* Update keyboards/boardsource/5x12/keymaps/via/keymap.c
use correct number of layers for VIA
* update product id to use same pattern as others
* Update keyboards/boardsource/5x12/keymaps/via/readme.md
* Update keyboards/boardsource/5x12/keymaps/via/readme.md
* Hub16 AutoHotKey Companion
* Revised after PR comments by Drashna
* Update keyboards/hub16/keymaps/ahk_companion/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/hub16/keymaps/ahk_companion/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/hub16/keymaps/ahk_companion/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/hub16/keymaps/ahk_companion/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/hub16/keymaps/ahk_companion/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/hub16/keymaps/ahk_companion/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* setup keyboard
* fit v1 board setting
* remove unused def and add ergodox_pretty
* add user hooks
* add ergodox_pretty to info
* apply suggestions
* use default split usb timeout
* added via keymap
* replaced PRODUCT_ID 0x1157 with PRODUCT_ID 0x2157
replaced product id to distinguish rev2 from rev1.
bakingpy gave me permission through discord chat.
* Update keyboards/keebio/viterbi/keymaps/via/keymap.c
* Update keyboards/keebio/viterbi/keymaps/via/rules.mk
* made a simplier keymap.c for via folder
Based from the default keymap, removed unnecessary codes.
* Add via keymap for Plaid-Pad
- Add VIA support for the Plaid-Pad
- Changes Vendor ID and Product ID (to follow VIA's guidelines)
* Add extra encoder pads for rev1.1
* Change Product Id from pp to PP (hex value)
* improved readme
- detailed informations about rotary encoder, bootloader and firmware
* Improved encoder informations in via keymap
* Improved encoder infos and code in default keymap
* add revision folder for rev1 and rev1.1
* change encoder assignment for defaul a via keymap
* Update keyboards/keycapsss/plaid_pad/config.h
* change revision number
* Update keyboards/keycapsss/plaid_pad/rules.mk
* Update keyboards/keycapsss/plaid_pad/rules.mk
* Update keyboards/keycapsss/plaid_pad/rules.mk
* Update keyboards/keycapsss/plaid_pad/rules.mk
* Update keyboards/keycapsss/plaid_pad/readme.md
* add license to header of *.h and *.c files
* remove the list of alternate bootloaders
- due to the pr checklist
* Update keyboards/keycapsss/plaid_pad/rules.mk
* added SQUARE.X keyboard from the iNETT Studio
* split to two sub directories
* Apply suggestions from code review
* Update keyboards/inett_studio/sqx/universal/universal.h
* Apply suggestions from code review
* update the matrix control keycodes settings
* use the offical macro to the rgb matrix control
* fixed led position issue
* Apply suggestions from code review
* removed the redundant #endif
* update default keymap
* Apply suggestions from code review
* add license header
* Add VIA support for lazydesigners\bolt
Add VIA support for lazydesigners\bolt
* Update keyboards/lazydesigners/bolt/via/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* chore: pulled the latest from master
Bring my redox layout from my latest redox branch
Bring my latest user stuff from my redox branch
* Update users/danielo515/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* chore: small cleanup
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Adding VIA support for sixkeyboard
* Update keyboards/sixkeyboard/keymaps/via/keymap.c
* Update keyboards/sixkeyboard/keymaps/via/keymap.c
* Update keyboards/sixkeyboard/keymaps/via/keymap.c
* Update keyboards/sixkeyboard/keymaps/via/keymap.c
* Update keymap.c
added suggested header. left my name out and changed year to 2020.
* split up the e85 into hotswap and soldered variants
* remove layout_all LAYOUT macro for hotswap pcb
* add copyright header to to all config files
* remove list of alternate bootloaders
* spruce up config file
* comply with PR check list
* Update keyboards/exclusive/e85/hotswap/info.json
* Update keyboards/exclusive/e85/hotswap/info.json
* Update keyboards/exclusive/e85/hotswap/info.json
* Update keyboards/exclusive/e85/rules.mk
* Update keyboards/exclusive/e85/config.h
* Update keyboards/exclusive/e85/hotswap/config.h
* Update keyboards/exclusive/e85/soldered/config.h
* remove LAYOUT_all in hotswap and also remove superfluous comments
* remove the soldered tsangan map
* replaced #define PRODUCT_ID 0x1157 with #define PRODUCT_ID 0x2157
replaced product id to distinguish rev2 from rev1.
bakingpy gave me permission through discord chat.
The recent change to unnest macros put the enter on the wrong matrix key. On the 1uprgb, the ANSI and ISO enters share the same cell as does the ANSI and ISO backslash.
* K-Type refactor
* Declare QMK in product name again
* Hopefully fix matrix scanning
* Maybe this time
* Partial (literally) RGB Matrix support
* Put RGB_MATRIX_ENABLE into rgb keymap for now
* Add ifdefs for RGB config
* Set layer 1 to actually be layer 1...
* Update keyboards/k_type/readme.md
* Put all RGB config in keymap for now
* Set SDB high?
* Before `rgb_matrix_init()` would be best
* User level, not keyboard
* Combating dropped keys
* Nope
* Readme for RGB keymap
* Remove custom matrix
* Better handle LTO_ENABLE
Especially when calling from command line
* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE
* Remove long for LTO from show_options.mk
* Add support for hsv->rgb conversion without using CIE curve.
* Modify anavi/macropad8 to disable unicode (was unused), otherwise firmware size is too large.
* Consolidate TKC projects and increase VIA keymap count to 4.
* Updated readme files.
* Removed config.h via limitation of 2 dynamic keymaps
* Reduce dynamic keymaps from 4 to 3 due to EEPROM space limitations.
* Update dynamic_keymap.c
* Restore 4 dynamic keymaps for VIA in TKC projects.
* Update quantum/dynamic_keymap.c
* add support for hid gamepad interface
add documentation for HID joystick
Add joystick_task to read analog axes values even when no key is pressed or release. update doc
Update docs/feature_joystick.md
Manage pin setup and read to maintain matrix scan after analog read
* Incorporates patches and changes to HID reporting
There are some patches provided by @a-chol incorporated on this commit,
and also some changes I made to the HID Report structure.
The most interesting is the one dealing with number of buttons: Linux
doesn't seem to care, but Windows requires the HID structure to be byte
aligned (that's in the spec). So if one declares 8/16/32... buttons they
should not have any issues, but this is what happens when you have 9
buttons:
```
bits |0|1|2|3|4|5|6|7|
|*|*|*|*|*|*|*|*| axis 0 (report size 8)
|*|*|*|*|*|*|*|*| ...
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*| axis 6
|*|*|*|*|*|*|*|*| first 8 buttons (report size 1)
|*| | | | | | | | last of 9 buttons, not aligned
```
So for that I added a conditonal that will add a number of reports with
size 1 to make sure it aligns to the next multiple of 8. Those reports
send dummy inputs that don't do anything aside from aligning the data.
Tested on Linux, Windows 10 and Street Fighter (where the joystick is
recognized as direct-input)
* Add save and restore of each pin used in reading joystick (AVR).
Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc
instead of an output pin from the MCU.
Fix joystick report id
Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes)
Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis.
Documentation fixes
* Fix port addressing for joystick analog read
* The other required set of changes
As per the PR, the changes still holding it up.
Add onekey for testing.
Fix ARM builds.
Fix device descriptor when either axes or buttons is zero.
Add compile-time check for at least one axis or button.
Move definition to try to fix conflict.
PR review comments.
qmk cformat
* avoid float functions to compute range mapping for axis adc reading
* Remove V-USB support for now. Updated docs accordingly.
* Update tmk_core/protocol/lufa/lufa.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios
* Fix HID joystick report sending for ChibiOS.
Add one analog axis to the onekey:joystick keymap.
Fix pin state save and restore during joystick analog read for STM32
MCUs.
* Update tmk_core/protocol/chibios/usb_main.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/lufa/lufa.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add missing mcuconf.h and halconf.h to onekey:joystick keymap.
Add suggested fixes from PR.
* Switch saveState and restoreState signature to use pin_t type.
onekey:joystick : add a second axis, virtual and programmatically animated.
* Update docs/feature_joystick.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update docs/feature_joystick.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add PR corrections
* Remove halconf.h and mcuconf.h from onekey keymaps
* Change ADC_PIN to A0
Co-authored-by: achol <allecooll@hotmail.com>
Co-authored-by: José Júnior <jose.junior@gmail.com>
Co-authored-by: a-chol <achol@notamail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update Space Cadet to use Custom Tapping Term functionality
* Detect correct keycode for space cadet tapping term
* Update tap dancing to use global custom tapping term
* Update documentation for Tap Dances
* formatting pass
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/feature_tap_dance.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update for future
* Update user keymaps for space cadet
* Fix typos
* Clean up tapping term stuff
* Fix compiler issue if NO_ACTION_TAPPING is enabled
Co-authored-by: fauxpark <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Initial work for consolidation of board files and default ChibiOS configs.
* Migrate F401/F411 black pills for testing.
* Add early init bootloader jump flag.
* Add support for I2C in order to use i2c_scanner keymap.
* Add F401/F411 HSE bypass to get things booting.
* Exempt "hooked" ChibiOS conf files from updater script.
* Fix up ordering for bootloader_defs file check.
* Match previous $(KEYBOARD_PATHS) value for Proton-C, updated for all board configs.
* Add a compiling layout based on minidox
* Add the correct pins
* Add old for science code
* Update to 2020 standards
* Get the keymap working
* update config
* Update pinout
* Fix pins
* Make requested changes
* Add info.json for configurator
* for science - PR comments
* Apply suggestions from code review
* setup handwired pteron38
* Clean up readme
* readme follow template
* c formatting conventions
* remove file size comments from rules.mk
* use direct link to imgur image
* Apply suggestions from code review
* add license
* kbd67/mkiirgb - allow disabling rgb matrix
wrap rgb matrix funs in defines
* kbd67mkiirgb - changes per review
remove kb funcs that just call the user version. what's left is all rgb
matrix stuff so we can just wrap the whole file.
* Initial prep for PR
* Fixing jsons for revs
* Remove old keymap ref in readme
* Add Rev1 default layout
* Fix extra comma in default r1 keymap
* Changed default keymap for r1 to match new split bottom row macro name, updated via keymap readme, updated r1 json to match layout macro name, updated split space macro for r1
* Moved combo configs to default keymaps, removed unused bootloader selections
* Update keyboards/underscore33/rev1/rules.mk
* Update keyboards/underscore33/rev2/rules.mk
* Refactor _33 folder structure
* Add VIA keymap to rev1
* Rename macros and product_id as suggested
* add support for ModelM USB board
* EMI improvement: remove unnecessary toggling of MOSI pin
* address review comments
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mschwingen/modelm/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mschwingen/modelm/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/mschwingen/modelm/keymaps/default/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* update printf usage
* add comment
* EMI improvement: remove unnecessary toggling of MOSI signal
* remove trailing space
* use shorter macros as suggested in review by noroadsleft, re-format table to line up columns
* Update keyboards/mschwingen/modelm/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/README.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/README.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
use spi_read from core insteads of our own copy
Co-authored-by: Ryan <fauxpark@gmail.com>
* include spi_master.c to use spi_read()
* Update keyboards/mschwingen/modelm/README.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review: correct indenting in keymap
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review
use automatic variant defines from makefile instead of defining our own
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/mschwingen/modelm/rules.mk: use QUANTUM_LIB_SRC for uart.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Michael Schwingen <michael@schwingen.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* added matrix 8xv2.0 additional keyboard
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* add copyright and speed up the matrix scanning
* Update keyboards/matrix/m20add/rules.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* added nemui layout
* via support working
* added license headers for c and h files
* Update keyboards/nemui/keymaps/via/rules.mk
* Update keyboards/nemui/nemui.c
* Update keyboards/nemui/config.h
* Update keyboards/nemui/readme.md
* Update keyboards/nemui/rules.mk
* removed nemui.json as it was supposed to only be in via repo
* Update keyboards/nemui/keymaps/default/keymap.c
* Update keyboards/nemui/info.json
* Update keyboards/nemui/info.json
* Update keyboards/nemui/keymaps/via/keymap.c
* Update keyboards/nemui/keymaps/via/keymap.c
* first iteration of my keymap
* * move to userspace
* "script" modes
* keymap bling
* OM and RUPA keys
and tryin to micro-optimize in process_records.c
* woops
swap shifted rupas
forgot to add codepoint for OM
* Apply suggestions from code review
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add call to process_record_keymap, per review
* fall through to process_record_keymap
* license headers
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add in drewguy's code with a few additions to the keymap
* add VID and PID
* fixup defualt keymap
* add VIA keymap
* thanks to bigchimpo for reminding me to put an Fn key in the default keymap
* make sure we have the right gitugithub url for drew
* remove description as per PR checklist
* append readme with more information
* Update keyboards/holyswitch/southpaw75/config.h
* Update keyboards/holyswitch/southpaw75/info.json
* Update keyboards/holyswitch/southpaw75/southpaw75.h
* Update keyboards/holyswitch/southpaw75/info.json
* [kbdfans] Added dbroqua layout for kbd6x
Add dbroqua keymap for kbd6x
Add dbroqua layout for kbd6x with HHKB style and RGB.
* Update keymap.c
* Change based on zvecr
* Added RESET button
* Add support for keyboard 'Bolt'
Add support for keyboard 'Bolt'
* Update info.json
* Update info.json
* Update keyboards/lazydesigners/bolt/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/lazydesigners/bolt/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/lazydesigners/bolt/readme.md
Co-authored-by: Joel Challis <git@zvecr.com>
* Update info.json
* Update keyboards/lazydesigners/bolt/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/lazydesigners/bolt/bolt.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/lazydesigners/bolt/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/lazydesigners/bolt/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/lazydesigners/bolt/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/lazydesigners/bolt/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/lazydesigners/bolt/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* via keymap for boardsource/3x4
* fix formatting
* Apply suggestions from code review
fix rules.mk
* Update keyboards/boardsource/3x4/rules.mk
* use unique product ID
* update vendor id to be unique, update product id to make more sense
* First commit
* Added ChibiOS files
* renamed files to remove capital letters
* Fixed layout references
* fixed image reference
* Fixing errors
* Fixed config.h
* changed second up to fn key
* renamed files and added beginning of via compatibility
* renamed keyboard
* removed vscode files
* fixing files for via compatibility
* adding via files
* working via compatibility
* Update readme.md
* Update readme.md
* First commit
* Added ChibiOS files
* renamed files to remove capital letters
* Fixed layout references
* fixed image reference
* Fixing errors
* Fixed config.h
* changed second up to fn key
* renamed files and added beginning of via compatibility
* renamed keyboard
* removed vscode files
* fixing files for via compatibility
* adding via files
* working via compatibility
* added license header to via file
* preparing for pull request
* Fixed firmware according to pull request feedback
* fixed readme according to pull request feedback
* Updated readme and removed unnecessary layers in default/keymap.c
* removed whitespace
* updated keymap readme to match suggestion
* Initial commit for HHKB Lite 2
* Rearrange keymap
* Clean up config
* Fix pin assignments
* Code and filename cleanup
* Add README
* Apply suggestions from code review
Code cleanup
* Update keyboards/hhkb_lite_2/README.md
Documentation cleanup
* Change Vendor ID to unused
* One more LAYOUT
* Via keymap for HHKB Lite 2
* Remove redundant keymap.c
* Add README for Via keymap
* Fix vendorId for Via keymap
* Apply suggestions from code review
Cleanup based on review feedback
* Clean up via keymap makefile rules
* Switch to C keymap instead of JSON for Via layout
* Move bootmagic key config to main
Moved to main keyboard config to be shared by all keymaps.
* Address PR feedback
* Reformat config comments
* Format rules.mk comments
* Rename README -> readme
* Use `make` instead of `qmk` in examples
* Updating keymaps for Gingham and DMQ Design SPIN and adding keymap for BoardSource 4x12
* Update keyboards/boardsource/4x12/keymaps/codecoffeecode/keymap.c
* cleaning up
* got some working bones
* working pretty well
* really livin' now
* all done
* copyright adjustments
* default keymap
* readme
* no descrip
* remove trailing slashes
* remove blank line
* remove trailing slashes
* clean up readme
* clean up rules spacing
* bootloader spacing
* made quick json from KLE converter
* remove postageboard mini references
* add actual manu and product values
* add make example
* rework
* remove double bootload define
* smoller image
* liscensed
* correct dimensions
* dimensions
Specifically, don't want to have both RGBLight and RGB Matrix (with WS2812) enabled at the same time. This will cause issues in usage, but apparently not when compiling. Additionally, the led matrix was not encapsulated with preprocessor code.
* ext65rev2 initial
* open drain change and config
* pwm
* pwm streams
* spi
* ws2812 spi
* oled
* enable sleep
* keymap and dissable oled
* readd oleds
* nooled
* led_update_kb revised
* update and remove board specific files and add to ext65rev2.c
* Update OLED usb status
* Update keyboards led state
* Layer state set kb
* Return state
* Update keyboards led state
* Update OLED usb status
* merge master and merge rev folders
* add readme
* move board_init to only if OLED is enabled
* update readme
* update rules.mk
* Remove OLED from rules.mk
* Update config.h
* show AEBoards
* Update keyboards/aeboards/ext65/rev2/rules.mk
Dylan Straw
Pierre Chevalier
dezli
Sendy YK
Sönke Hahn
yulei
Drashna Jaelre
Ramon Imbao
Blake
cole smith
Reid Sox-Harris
JagdPietr Reneksson
Danny
Xelus22
Garret G
Jakob Stendahl
Harshit Goel
MelGeek
James Young
holtenc
Salicylic-acid3
Spaceman
Joel Challis
Raleigh Wayland
Ryan
MechMerlin
MakotoKurauchi
gtips
Filip Paryż
Taylor Walla
Christian Eiden
Nate Stein
Evgenii
Silvio Gulizia
Joakim Tufvegren
Dave Rowe
Evan Travers
moyi4681
EMajesty
Chus
Reibl János Dániel
Tom Swartz
Erovia
stein3
Gergely Peidl
Jakob
Thomas Holt-Ronczy
tomic1785
Sergey Vlasov
Isaac
Fred Silberberg
mechlovin
swampmonster
Simon
Nick Abe
Joe Strong
AlisGraveNil
Sturek
Nic Lake
Peter Peterson
Žan Pevec
ridingqwerty
Jordan
ai03
yhr0x43
yiancar
Adam Gwilliam
thompson-ele
Jean Potier
Keebz Dot Net
Brandon Claveria
Joel Schneider
2Moons-JP
Evy Dekkers
jackytrabbit
doodboard
Felix Jen
Albert Dong
George Mao
QMK Bot
Sendy YK
gooberpsycho
myfreeweb
Sendy YK
kingwangwong
Isaac
Max Drasbeck
Brian Marsh
Roman Bange
Dmitry Nosachev
Ethan Nguyen
Seaton Jiang
DonutCables
Croktopus
Rustam Zagirov
Ole Westendorff
Jonathan Rascher
marksard
codecoffeecode
Eric N. Vander Weele
Samuel Baumgartner
Dan
Brandon Schlack
Dan
Thierry Michel Philippe Kleist
worldspawn00
coseyfannitutti
muuko
Richard Titmuss
pabile
Stephen Huan
Patricio Gonzalez del Valle
jrdsgl
Baris Tosun
4pplet
Rys Sommefeldt
yossiyossy
spotpuff
Dan White
vattern
Lasse Bjerre
Nick Blyumberg
LSChyi
Darren Meehan
binepad
TheLibra23
Ben
hidenori
Alvaro Muente
Callum Oakley
Jan Kolkmeier
boss566y
Vitja Makarov
gitdrik
nathanvercaemert
Koichi Katano
Daniel Rodríguez Rivero
Maarten Dekkers
mujimanic
Andy Jack
t-miyajima
Matthew Lyon
Bradford
Josh Hinnebusch
Joe Wasson
gorbachev
Zach White
Nick Brassel
flehrad
TerryMathews
a-chol
Pete Sevander
Jonathan Dayton
Fidel Coria
rupa
tominabox1
eli
AKiwi92
Cassandra de la Cruz-Munoz
haierwangwei2005
Naoki Katahira
Chris Alves
kakunpc
Michael Schwingen
myoung34
cBachoo
zeriyoshi
rupa
LucW
fvolpe83
Damien
satt99
Alpha Chen
Yoonbae Cho
JesseLeung97
JuanTapMan
Yu-Xi Lim
rate
Wilba
Richard Goulter
markva
HASU
kaylanm
dp
Mike Rix Wolfe
kelvinhall05
Viet Yen Nguyen
Rossman360
shela
Ibnu Daru Aji
Dimiter Geelen
KgOfHedgehogs