Commit Graph

563 Commits (03e53dc8a2958c44b03b3863c27ce29b94f81f08)

Author SHA1 Message Date
Ryan Caltabiano ba26736d7e Fix bit count calculation for iterating layers 2019-05-18 13:47:34 -07:00
Alex Ong 00d1d7828c Typedef'ed layer_state_t to uint32_t (#3637)
* Typedef'ed layer_state_t to uint32_t.

This enables future work with layer_state_t to uint8_t for optimization purposes.

* Removed accidental xeal60 commit

* Revert to egyptian brackets, added sizeof(layer_state_t) so when layer_state_t is redefined it will automagically work.

* Add additional typedefs

* Add checks for setting layer state

* Update tmk_core/common/action_layer.h

Co-Authored-By: alex-ong <the.onga@gmail.com>

* Revert commit.
2019-05-17 13:47:50 -07:00
Drashna Jaelre 48b01446ba Make delay for Capslock in Hold-Tap functions configurable (#5497)
* Increase delay for Hold-Tap register for CAPSLOCK

Because it seems that the 80ms delay wasn't too much

* Screw it, make the caps delay a define and make it configurable
2019-05-16 10:28:06 -07:00
XScorpion2 62ba66d618 Cleanup/rgb matrix (#5811)
* clean up rgb matrix extern usage

Moved rgb matrix boiler plate into macros

Rebased onto typing heatmap pr

* Fixing the reversed frame buffer access in digital rain

* Fixing digital rain & typing heatmap if keyreactive effects are not enabled

* Apply suggestions from code review

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Adding parenthesizes to DRIVER_LED_TOTAL where necessary

* Updated docs

* added notes about parentheses
2019-05-10 16:55:02 -07:00
XScorpion2 af89752bff rgb_led struct conversion (aka: Per led (key) type rgb matrix effects - part 2) (#5783)
* Initial conversion of the rgb_led struct

* Converting last keyboard & updating effects to take advantage of the new structure

* New struct should not be const

* Updated docs

* Changing define ___ for no led to NO_LED

* Missed converting some keymap usages of the old struct layout
2019-05-07 16:22:46 -07:00
XScorpion2 e01b2d518a [Keyboard] Sol keyboard conversion to split common (#5773)
* Split common conversion

* Updated serial and encoder pins

* Fixing default folder until r2

* Fixing oled driver on slave split common

* Fixing keymap compile errors

* Fixing oled inactivity timer on slave split common

* Hoisted oled driver task, init, & activity to keyboard.c

* Update keyboards/sol/config.h

Co-Authored-By: XScorpion2 <rcalt2vt@gmail.com>

* Remove TAPPING_FORCE_HOLD
2019-05-06 15:06:43 -07:00
Drashna Jaelre 8a9c90ad78 Re-fix Mousekey Movements (#5740)
* Re-fix Mousekey Movements

After the new movement model was instroduced, it broke diagonal momement, again.  Reapplying fix from #3147 to both old and new acceleration method.

* Make diagonal mouse report checks more readable

Co-Authored-By: drashna <drashna@live.com>
2019-05-06 08:35:01 -07:00
Drashna Jaelre 41beecfc18 Add DFU Suffix for ARM boards (#5763)
* Add DFU Suffix for ARM boards

* Blindly flash DFU SUFFIX ARGS for now

* Fix commented out check

* Fix DFU Suffix Argument check

Thank you jack!

* Update Travis CI Scripts to include dfu-util

So we can get dfu-suffix as well

* Manually add dfu-suffix package

* Use external repo for newer version of dfu-util

One that includes dfu-suffix

* Update .travis.yml

* Silence unnecessary output from dfu-suffix
2019-05-03 08:24:22 -07:00
Drashna Jaelre 7e655a207e Add option to enable LTO easily (#5674)
* Add option to enable LTO easily and disable features that cause compiling errors with LTO

* Add documentation about LTO option

* Add to show_options
2019-05-02 08:03:42 -07:00
XScorpion2 a7113c8ed0 Updated rgb_led struct field modifier to flags (#5619)
Updated effects to test led flags
Updated massdrop to use new flags field for led toggle
2019-04-29 15:18:50 -07:00
Drashna Jaelre 90cd383d46 Fix wakeup function on ChibiOS (#5707)
Somebody was a very, very bad boy, and did a poor job of copy-pasting
2019-04-26 11:03:51 -07:00
Takeshi ISHII 6d73fe1277 fix LIB_SRC and QUANTUM_LIB_SRC for ARM (#5623)
* fix LIB_SRC and QUANTUM_LIB_SRC for ARM(chibios)

* remove ARFLAGS

* tmk_core/arm_atsam.mk:AR: remove 'rcs'
2019-04-22 11:20:13 -07:00
Drashna Jaelre dd64a4e738 Init RGB Matrix EEPROM
I'm not sure how to check if it's the same as RGBLIGHT's EEPROM, but if you don't init it, it **will not** work properly until it is initialized.
2019-04-19 14:58:08 -07:00
Danny Nguyen 746058306b Make sure NOBITS is set on reset_key
Patch from https://github.com/qmk/qmk_firmware/issues/3657#issuecomment-415147411

Long story short, in avr-gcc pre-8.2, reset_key was assigned to a memory area that was in a normal range, but when 8.2 came out, that memory got moved to an out of range area, causing errors like 0x800293 out of range. Apparently, this was fixed up in avr-gcc, but we haven't seen a release with the fix yet (we expected it in 8.3, but that didn't happen for some reason).

What this commit does is move the reset_key back to the original memory location it was in before.
2019-04-19 14:44:16 -07:00
Markus Weimar e3a940026e Improve mouse keys docs and constant speed mode 2019-04-18 23:31:17 -07:00
patrickmt 3542f594d9 Fix wake from suspend LED functionality
When waking from suspend, only enable the LED drivers if they were not previously set to disabled by the user. This functionality was removed by the recent updates to adapt Massdrop keyboards to QMK RGB Matrix. Affects Massdrop CTRL and ALT keyboards compiled using Massdrop Configurator mode.
2019-04-18 11:55:45 -07:00
Drashna Jaelre a9a5fd754e Max out range for max compatibility 2019-04-12 13:55:59 -07:00
Drashna Jaelre c27d96b4c1 Fix ATSAM's USB HID descriptor to support higher heycodes
Assuming I understand this correctly, this should set the max scancode to E7 (RGUI), which is the last listed code in the main list (everything else use for internal QMK/TMK stuff).
2019-04-12 13:55:59 -07:00
fauxpark 8dd0ff6c7a Remove keyboard description from Adafruit BLE device name 2019-04-07 16:05:30 -07:00
Drashna Jaelre 5701b75e3c Custom Tapping Term per key (#5009)
* Add customizable tapping terms

* Add Documentation

* Fix function

* Fixes

* It's not a pointer

* Add debugging output

* Update documentation to be at least vaguely accurate

* Use `get_tapping_term(tapping_key.event)` instead

`e` doesn't include column and row information, properly. It registers as 255, regardless of the actual keypress.

However `tapping_key.event` actually gives the correct column and row information.  It appears be the correct structure to use. 

In fact, it looks like the issue is that `e` is actually the "TICK" structure, as defined in keyboard.h

* Use variable tapping term value rather than define

* Silly drashna - tapping_key.event, not event

* add get_event_keycode() function

* Fix typo

Co-Authored-By: drashna <drashna@live.com>

* Remove post_process_record_quantum since it's the wrong PR

* Update quantum/quantum.c

Co-Authored-By: drashna <drashna@live.com>

* Better handle ifdef statement for permissive hold

Since we can't be sure that tapping term is actually 500

* Update quantum.c comments based on feedback

* Clean up get_tapping_term function

Clean up function so that users don't need to call the event function, and instead only check the keycode

* Add ability to run functionality on and off

* Make ifdef's more compact
2019-04-05 15:47:25 -04:00
Daniel Prilik 763b26cdb9 RGB Matrix support for Massdrop CTRL/ALT (#5328)
* port Massdrop CTRL/ALT to use RGB Matrix

Co-authored-by: Matt Schneeberger <helluvamatt@gmail.com>

* Massdrop lighting support working

This commit is to get the Massdrop lighting code working again through use of the compilation define USE_MASSDROP_CONFIGURATOR added to a keymap's rules.mk.
Added keymaps for both CTRL and ALT named default_md and mac_md. These should be used if the Massdrop style lighting is desired.

* Updating config based on testing results with patrickmt & compile errors

* Updates for PR5328

For CTRL and ALT:
Moved location of new RGB Matrix macros from config_led.h to config.h.
Added RGB_MATRIX_LED_FLUSH_LIMIT (time between flushes) to config.h for correct LED driver update timing.
Re-added missing breathing code for when Massdrop configurator mode is defined.

* remove prilik keymap form PR
2019-04-03 18:30:47 -07:00
Takeshi ISHII b9f6ff05d0 build size-check enhancement (#5485)
* build size-check enhancement

Changed to display a warning when the free size of compilation result is less than 512 bytes.

* update message.mk

* add SIZE_MARGIN variable, change default margin 512 to 1024

for Example.
```
$ make SIZE_MARGIN=2048 crkbd:all
$ make crkbd:all ## mergin is 1024
```

* Update message.mk

change message to ‘approaching the maximum’

Co-Authored-By: mtei <2170248+mtei@users.noreply.github.com>
2019-03-27 08:51:56 -07:00
Jon Arintok 346cbd8816 Add 3 speed mousekey movement option (#2246)
This allows for constant, non-accelerated mouse movement, while retaining the original functionality. Configurable by a define.
2019-03-26 19:34:33 -07:00
Rob Rogers afdc67184d correct typo in eeprom split target for dfu (#5445) 2019-03-18 23:25:34 -07:00
Danny 3c257c1c6e Add avrdude split EE_HANDS flash commands (#5414)
* Add EEPROM avrdude flashing commands for setting handedness

* Update docs with info on flashing EEPROM handedness files with commands
2019-03-15 14:05:50 -07:00
Michael F. Lamb f34244a871 Sleep until USB port becomes writable before running avrdude (#5393)
* sleep until usb port becomes writable before running avrdude

* only wait for a writable USB port when not on MSYS

using MINGW or MSYS: sleep for one second, as before.

otherwise: wait for the port to become writable.

* typo

* typo
2019-03-13 14:00:09 -07:00
Takuya Urakawa 2f3dbb1253 Add new keyboard Plaid and ATMEGA328p support (#5379)
* add plaid

* Change usb vid/pid to free id from vusb
Trivial fix for vusb core

* update readme

* update info.json default keymap

* fix typo

* Replace copyright
2019-03-12 11:48:17 -07:00
James Churchill 37932c293c Next set of split_common changes (#4974)
* Update split_common to use standard i2c drivers

* Eliminate RGB_DIRTY/BACKLIT_DIRTY

* Fix avr i2c_master error handling

* Fix i2c_slave addressing

* Remove unneeded timeout on i2c_stop()

* Fix RGB I2C transfers

* Remove incorrect comment
2019-03-12 10:23:28 -07:00
Chris Lewis c1c5922aae Velocikey: Match RGB animation speed to typing speed (#3754)
* Draft commit of typing speed RGB control

* More information in the readme

* Support all RGB animation modes (Fixes #1)

* Added support for all RGB light modes to use typing speed

Except christmas lights because that is seizure-inducing at high speeds!

* Introduced a value range specific to each RGB mode

Because some modes are a little too much when running at full speed!

* Update readme.md

* Update readme.md

* Re-arrange typing_speed definitions (Fixes #5) (#6)

* Re-arrange variable definitions to avoid including quantum.h from rgblight.c

* Fix a compilation error when trying to run make test:all

* Tweaks to the typing speed decay rate

* Renamed to momentum; moved implementation into dedicated files

* Groundwork for toggling momentum on/off (currently always on)

* Add EEPROM toggle for momentum-matching

* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic

* Move momentum decay task out of rgblight_task()

* Fix missing momentum.h in lufa.c

* Experimental LED support (untested)

* Draft commit of typing speed RGB control

* More information in the readme

* Support all RGB animation modes (Fixes #1)

* Added support for all RGB light modes to use typing speed

Except christmas lights because that is seizure-inducing at high speeds!

* Introduced a value range specific to each RGB mode

Because some modes are a little too much when running at full speed!

* Update readme.md

* Update readme.md

* Re-arrange typing_speed definitions (Fixes #5) (#6)

* Re-arrange variable definitions to avoid including quantum.h from rgblight.c

* Fix a compilation error when trying to run make test:all

* Tweaks to the typing speed decay rate

* Renamed to momentum; moved implementation into dedicated files

* Groundwork for toggling momentum on/off (currently always on)

* Add EEPROM toggle for momentum-matching

* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic

* Move momentum decay task out of rgblight_task()

* Fix missing momentum.h in lufa.c

* Added documentation

* Renamed feature to velocikey

* Reverted readme to original state

* Correct the readme title

* Updated feature name in the docs

* Update EECONFIG name

* Add compile-time toggles for velocikey

* Update feature documentation

* Revert "Merge branch 'led-support' into master"

This reverts commit e123ff5febf61639b9a9020748e1c2e2313460ff, reversing
changes made to df111a55b9d4929182e16108b1c0ead15b16df97.

* Move velocikey EECONFIG definition to depend on VELOCIKEY_ENABLE

* Rename decay_task function to decelerate

* Apply suggestions from code review

Co-Authored-By: chrislewisdev <chris@chrislewisdev.com>

* Re-order eeconfig definitions

* Apply coding conventions

* Apply #ifdef check in lufa.c

* Refactored interval time checks into one functionc

* Small rename

* Fix unused function error for layouts not using all rgb effects

* Only update EEPROM if Velocikey is enabled

* Incorporate code review feedback

* Small adjustment to top-end decay rate

* Add Velocikey documentation to table of contents

* Bring tetris:default keymap size down by disabling audio
2019-02-21 07:22:46 -08:00
Jumail Mundekkat 149015e799 Fixed grep issue in bootloader build target (#3848)
* Changed use of '\s' in grep to '[ \t]' for portability

* Pushed DFU Keyboard.h into a shell script

* Fixed execution permissions on make_dfu_header,sh
2019-02-18 10:00:33 -08:00
Konstantin Đorđević 5cb713148d Change Command keycode defaults to match corresponding Bootmagic codes (#5078)
* Change Command keycode defaults to match corresponding Bootmagic codes

* Make alternate magic key keycodes consistent

* Reflect changes from previous commit in tmk_core/common/command.c

* Remove unnecessary MAGIC_KEY_* definitions from keymaps compatible with these changes

* Swap E and BSPACE for MAGIC_KEY_EEPROM

* Add MAGIC_KEY_EEPROM_CLEAR instead of MAGIC_KEY_EEPROM_ALT

* Remove BOOTMAGIC_ENABLE checks around EECONFIG stuff

* Update Command descriptions
2019-02-17 22:23:32 -08:00
ishtob 2cee371bf1 Haptic feedback generalized - DRV2605 and solenoids (#4939)
* initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards

* Haptic feedback enhancements: on/off toggle working, feedback order working
todo:
-work on modes switching
-get modes switching to save to eeprom

* haptic enhancement - eeprom and modes added

* Added set and get functions for haptic feedback

* initial implementation of solenoids under haptic feedback

* changed eeprom to 32 bits to reserve blocks for future features

* start documentation of haptic feedback

* change keycode per comment from reviewers

* typo fixes

* added eeprom for solenoid configs

* added solenoid and docs

* Add/fix default parameters configs, improve docs

* more doc cleanup

* add in solenoid buzz toggle, clean up doc

* some fixes for error in compiling solenoid

* fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c

* fixes for avr side issues

* update keymap

* fix keymap compile error

* fix bugs found during solenoid testing

* set pin that is not powered during bootloader

* added warning about certain pins on the MCU may trip solenoid during DFU/bootloader
2019-02-16 18:39:30 -08:00
Shihpin Tseng 68fad7b777 Enable custom chibios sub-platform 2019-02-14 21:06:26 -08:00
Drashna Jaelre c22f3ba3a2
Debounce refactor / API (#3720)
* Added xeal60 via clone of lets split

* Delete removed other keymaps

* Basic keymap (no FN). Compiles.

* Removed NP_STAR and NP_SLSH.

* Removed "debounce_algo = manual" in all keyboards with CUSTOM_MATRIX = yes.

* Changed order of rules in TMK. Documented feature.

* Fixed missing whitespace in debounce documentation

Table wasn't working due to missing newline.

* Added bold in a few areas.

* DO NOT USE - Removed debounce from TMK.

* Remove accidental xeal60 commit

* DO NOT USE - debounce successfully compiled.

* DO NOT USE Revert back to original API to support split_keyboards.

* Working eager_pk

* Whitespace cleanup.

* Restored debounce.h since there wasnt any real change.

* Moved debouncing_time variable  to inside #if debounce

* Removed check for custom_matrix. We can safely include the debounce file for compilation when custom_matrix is used.

* Removed #include "matrix.h" from debounce.h

* Bug fix - was using MATRIX_ROWS instead of num_rows

* Fixed compilation error with debounce_sym_g

* Renamed DEBOUNCE_ALGO to DEBOUNCE_TYPE

* Malloc array in debounce_eager_pk, since split keyboards only use MATRIX_ROWS/2.

* Fix compile error in debounce_eager_pk

* Stricter, leaner DEBOUNCE_TYPE section in common_features.mk. Cleanup debounce_type.mk
2019-02-14 20:36:20 -08:00
Drashna Jaelre cc5c6b449a Add kb and user level keyboard initialization functions (#3113)
* Add suspend functions

* Disable RGB code if it's disabled

* Add keyboard_init functions

* Change where references so it will compile

* Wrong command chained in wake up kb function

* Fix non-feature file changes

* Add documentation

* Re-add matrix init docs

* add rgblight code to example

* Remove suspend code

* Clean up docs

* Fix docs

* Fix suspend code

* more doc fixes

* change function to startup_* rather than keyboard_init_

* fix spelling error

* fix up docs to finish removing keyboard_init

* Use Pre and Post init functions

* Update Documenation

* Remove changes to my keymap and userspace code

* Cleanup

* Revert changes to extra files

* Forgot a semicolon

* Make sure all protocols call keyboard_setup

* Cleanup functions

* Unset startup_user

* Remove changes from division keyboard

* Readd startup_user function

* Remove all to startup_user

* Update docs/custom_quantum_functions.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/custom_quantum_functions.md

Co-Authored-By: drashna <drashna@live.com>

* Add suggestion line

* Rebase fixes

* Update documentation to be more useful/accurate

* Cleanup of documentation

* Fix spacing inconsistency

* Revert unexpected change to keymap
2019-02-14 20:18:54 -08:00
Andrew Kannan 6b4549da8c Add Satisfaction75 to QMK, Enable EEPROM on stm32f072 (#5094)
* Add stm32f072 base ck4x4 to handwired

* add prints

* Save these tries

* Save changes again

* Working hadron oled

* OLEd working but ws2812b still iffy:

* save another try

* Encoder feature + OLED

* RTC code

* Implement clock setting mode

* Whitespace

* Encoder hooked up to working LED PWM code

* Add missing files

* eeprom changes

* Save changes

* Move i2c master

* Move satisfaction75 under cannonkeys

* Set proper default folder

* Revert some core changes

* Undo paved iris changes

* Reorganize code for maintainability and prep for new features

* Add starting code for clock OLED mode

* Clock set mode finished

* Add custom encoder modes

* Actually add VIA keymap

* Gate to only 072

* fix gate for only 072

* Update header guards and includes

* Update i2c selection strategy

* Update board.c to handle software reset to DFU
2019-02-13 08:03:26 -08:00
Drashna Jaelre d3f7910e68
Remove AUTOGEN and fix Travis Compiled Push scripts (#5077)
* Grab HEX and BIN files from autogen

And push them to qmk.fm/compiled

* Make autogen copy extension agnostic

This way, when travis cl scrpit looks for hex files, it will actually grab bin files, and not hex files for ARM boards

* Handle the AUTOGEN in :bin target to properly handle edge cases

Both the TADA68 and ATSAM boards generate the hex file and then convert it to a bin file. The changes I made does not handle this well, at all.  This removes the hex and replaces it with a bin, if a bin is normally generated.

* Revert hex target to original copy command

* Check hex and bin separately in compile push script

Since I don't know how to script this, well

* Simplify push to compiled folder

* Further simplify compiled push script

* Move AUTOGEN parsing to a more sane location to prevent tech debt

Thanks to skully!

* Remove AUTOGEN completely, as it's not needed

This has the benefit of making everything super simple, since we can pull every hex and bin from the root of the qmk_firmware folder, and move that to th compiled folder.  This also removes old and unneeded code, and removes some tech debt that has been accrued, without adding more, in theory.
2019-02-12 16:46:04 -08:00
skullY bf2670601d compiles, but long delay on startup and problems 2019-02-10 15:37:12 -08:00
Konstantin Đorđević f1be0236b6 Remove unnecessary IS_COMMAND definitions from recently added keyboards (#5065) 2019-02-06 11:28:47 -08:00
Thomas Baart 47051f506f Add One Shot Key callbacks (#4697)
* Added callbacks to one shot modifier changes

* Altered signature of callback functions

* Reordered the callback methods, shortened brief documentation

* Added One Shot Modifier callback documentation

* First attempt at unit tests

* Revert "First attempt at unit tests"

This reverts commit 5ec21a782202c0d74cf21cb852bd319f0c8b4842.

* Simplified oneshot function implementations

* Made clear_oneshot_locked_mods to be conform action_util.h, adhering to the (void) signature

* Made used datatypes for oneshot mods consistently unsigned integers

* Corrected callback to call clear callback when clear_oneshot_locked_mods is invoked

* Simplified oneshot equals statements

* Corrected return type and signature of get and set oneshot locked mods

* Consolidated one shot callbacks, added initial layer callback version

* Fixed non-updating one shot layer variable after timeout or other clear, added code comments

* Added better one shot key docs
2019-02-05 10:19:56 -08:00
fauxpark d8e9a0f7a3 Change return type of layer_switch_get_layer() to uint8_t (#5011)
* Change return type of layer_switch_get_layer() to uint8_t

* Keep loop index signed so we don't wrap around
2019-01-31 16:40:12 -08:00
Andrew Kannan 7186d1581a Moving cannonkeys boards to one place, eeprom fix (#4999)
* Move boards to cannonkeys and share resources

* Share common files between cannonkey boards

* Fix ortho60 keymap

* update LED numbers

* Add RGB keys to Ortho60 and Ortho48

* Add Backlight control to default layout Ortho60 and 48

* Remove unnecessary ws2812.c SRC from rules.mk
2019-01-29 20:04:20 -08:00
patrickmt 60ae309ced arm_atsam ADC0 factory calibration correction
Factory calibration data was not being loaded properly for ADC0, which affects the accuracy of 5V readings.
2019-01-28 17:16:33 -08:00
Rockman18 df251d7a13 Backlight - New option : BACKLIGHT_CAPS_LOCK (#4769)
* [BACKLIGHT_CAPS_LOCK_INDICATOR] Use backlight toggling as Caps Lock LED

I've implemented this feature because S65-X doesn't have LED indicators
and the existing led_set_kb(usb_led) function try to use backlight as
indicator but that creates an inconsistency with backlight_config state.

- define `BACKLIGHT_CAPS_LOCK_INDICATOR` to enable Caps Lock indicator
  using backlight (for keyboards without dedicated LED)

- Don't turn off LED indicators when suspend because backlight is
  already turned off. Else led_set(0) will turn back on backlight.

- Documentation has been updated

* [BACKLIGHT_CAPS_LOCK_INDICATOR] Turn off all LED indicators except Caps Lock if BACKLIGHT_CAPS_LOCK_INDICATOR

* [BACKLIGHT_CAPS_LOCK] Rename BACKLIGHT_CAPS_LOCK_INDICATOR

* [BACKLIGHT_CAPS_LOCK] Use new IS_LED_ON method
2019-01-28 16:57:56 -08:00
Andrew Kannan 0f507f0169 Practice60 RGB and PWM Backlight (#4929)
* Update Practice60 to enable RGB via SPI DMA and use PWM backlight breathing

* Correct stm32f103c8t6 flash size in eeprom definition

* Remove unused files and improve ifdef checks

* Update quantum/rgblight.c

Co-Authored-By: awkannan <andrew.kannan@klaviyo.com>

* Update quantum/rgblight.c

Co-Authored-By: awkannan <andrew.kannan@klaviyo.com>

* EEPROM implementation fix and updated p60 code

* Update define

* Remove dead code

* Update keymap to remove test key

* Update keymap again
2019-01-28 16:40:02 -08:00
Konstantin Đorđević 4d9b11af14 Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955)
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4

* Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions

* Update docs to use get_mods() instead of keyboard_report->mods

* Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test

For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist

* Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)
2019-01-27 00:28:40 -08:00
Drashna Jaelre b05c0e46c6 Adds a default value for IS_COMMAND for COMMAND feature (#4301)
* Add default value for IS_COMMAND for COMMAND feature

* Cleanup and consistency

* Update Templates to reflect change

* Fix IS_COMMAND in template

* Fix IS_COMMAND define

* Use consistent IS_COMMAND block in templates

* Remove unnecessary `#undef IS_COMMAND` directives

* Fix compile issue on orthodox

* Reomve IS_COMMAND option for newer boards

* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting

* Remove a couple of additional IS_COMMAND defines

* Remove remaining redundant IS_COMMAND definitions

* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin

* Remove multiple empty lines in modified config.h files

* Update additional boards

* Reomve IS_COMMAND from newer boards

* Update Alice keyboard

* Remove IS_COMMAND from additional boards

Jan 24th edition
2019-01-26 15:49:45 -08:00
alex-ong 574fc6444b Whitespace cleanup. 2019-01-26 17:38:52 +11:00
alex-ong 39ca330f10 DO NOT USE - Removed debounce from TMK. 2019-01-26 16:56:01 +11:00
Alex Ong c9ba618654 DO NOT USE Merge branch 'master' into debounce_refactor
Merged, however now there are two debounce.h and debounce.c to mess around with and coalesce.
# Conflicts:
#	quantum/matrix.c
2019-01-26 12:13:19 +11:00