integrated serial mouse drivers as a feature into the firmware architecture

* can be enabled by defining Makefile macro SERIAL_MOUSE_MICROSOFT_ENABLE or
   SERIAL_MOUSE_MOUSESYSTEMS_ENABLE.
 * Serial implementation can be chosen via SERIAL_MOUSE_USE_SOFT and
   SERIAL_MOUSE_USE_UART macros
 * UART configuration still has to be done in config.h: I added working clauses
   for both mouse protocols to ps2_usb's config.h
master
Robin Haberkorn 2014-07-27 17:07:26 +02:00
parent 388fe60c67
commit 7dde35d4f7
5 changed files with 84 additions and 1 deletions

View File

@ -91,6 +91,19 @@ PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomen
#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
#PS2_USE_BUSYWAIT = yes # uses primitive reference code
# Serial Mouse Options
# You can choose a mouse protocol and the implementation of
# the underlying serial connection.
#
#SERIAL_MOUSE_MICROSOFT_ENABLE = yes # Enable support for Microsoft-compatible mice
#SERIAL_MOUSE_MOUSESYSTEMS_ENABLE = yes # Enable support for Mousesystems-compatible mice
#SERIAL_MOUSE_USE_UART = yes # use hardware UART for serial connection
#SERIAL_MOUSE_USE_SOFT = yes # use software serial implementation
# Optional serial mouse driver features
# Support scrolling while holding the middle mouse button
# (currently only supported for Mousesystems mice):
#OPT_DEFS += -DSERIAL_MOUSE_CENTER_SCROLL
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax

View File

@ -170,4 +170,42 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#endif
#endif
#ifdef SERIAL_MOUSE_MICROSOFT
/*
* Serial(USART) configuration (for Microsoft serial mice)
* asynchronous, positive logic, 1200baud, bit order: LSB first
* 1-start bit, 7-data bit, no parity, 1-stop bit
*/
#define SERIAL_UART_BAUD 1200
#define SERIAL_UART_DATA UDR1
#define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
#define SERIAL_UART_RXD_VECT USART1_RX_vect
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
#define SERIAL_UART_INIT() do { \
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
UCSR1C = (1<<UCSZ11) | (0<<UCSZ10); /* no parity, 1 stop bit, 7-bit characters */ \
sei(); \
} while(0)
#elif defined(SERIAL_MOUSE_MOUSESYSTEMS)
/*
* Serial(USART) configuration (for Mousesystems serial mice)
* asynchronous, positive logic, 1200baud, bit order: LSB first
* 1-start bit, 8-data bit, no parity, 1-stop bit
*/
#define SERIAL_UART_BAUD 1200
#define SERIAL_UART_DATA UDR1
#define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
#define SERIAL_UART_RXD_VECT USART1_RX_vect
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
#define SERIAL_UART_INIT() do { \
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
UCSR1C = (1<<UCSZ11) | (1<<UCSZ10); /* no parity, 1 stop bit, 8-bit characters */ \
sei(); \
} while(0)
#endif
#endif

View File

@ -23,5 +23,25 @@ ifdef PS2_USE_USART
endif
ifdef SERIAL_MOUSE_MICROSOFT_ENABLE
SRC += $(PROTOCOL_DIR)/serial_mouse_microsoft.c
OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MICROSOFT \
-DMOUSE_ENABLE
endif
ifdef SERIAL_MOUSE_MOUSESYSTEMS_ENABLE
SRC += $(PROTOCOL_DIR)/serial_mouse_mousesystems.c
OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MOUSESYSTEMS \
-DMOUSE_ENABLE
endif
ifdef SERIAL_MOUSE_USE_SOFT
SRC += $(PROTOCOL_DIR)/serial_soft.c
endif
ifdef SERIAL_MOUSE_USE_UART
SRC += $(PROTOCOL_DIR)/serial_uart.c
endif
# Search Path
VPATH += $(TOP_DIR)/protocol

View File

@ -49,6 +49,10 @@
#endif
#include "suspend.h"
#ifdef SERIAL_MOUSE_ENABLE
#include "serial_mouse.h"
#endif
#include "descriptor.h"
#include "lufa.h"
@ -571,6 +575,10 @@ int main(void)
sleep_led_init();
#endif
#ifdef SERIAL_MOUSE_ENABLE
serial_mouse_init();
#endif
print("Keyboard start.\n");
while (1) {
while (USB_DeviceState == DEVICE_STATE_Suspended) {
@ -582,6 +590,10 @@ int main(void)
keyboard_task();
#ifdef SERIAL_MOUSE_ENABLE
serial_mouse_task();
#endif
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
USB_USBTask();
#endif

View File

@ -27,7 +27,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "print.h"
#include "debug.h"
#define SERIAL_MOUSE_CENTER_SCROLL
//#define SERIAL_MOUSE_CENTER_SCROLL
static void print_usb_data(const report_mouse_t *report);