diff --git a/converter/ps2_usb/Makefile b/converter/ps2_usb/Makefile
index 1dd23c157..f20039c6f 100644
--- a/converter/ps2_usb/Makefile
+++ b/converter/ps2_usb/Makefile
@@ -91,6 +91,19 @@ PS2_USE_USART = yes	# uses hardware USART engine for PS/2 signal receive(recomen
 #PS2_USE_INT = yes	# uses external interrupt for falling edge of PS/2 clock pin
 #PS2_USE_BUSYWAIT = yes	# uses primitive reference code
 
+# Serial Mouse Options
+#   You can choose a mouse protocol and the implementation of
+#   the underlying serial connection.
+#
+#SERIAL_MOUSE_MICROSOFT_ENABLE = yes	# Enable support for Microsoft-compatible mice
+#SERIAL_MOUSE_MOUSESYSTEMS_ENABLE = yes	# Enable support for Mousesystems-compatible mice
+#SERIAL_MOUSE_USE_UART = yes		# use hardware UART for serial connection
+#SERIAL_MOUSE_USE_SOFT = yes		# use software serial implementation
+
+# Optional serial mouse driver features
+# Support scrolling while holding the middle mouse button
+# (currently only supported for Mousesystems mice):
+#OPT_DEFS += -DSERIAL_MOUSE_CENTER_SCROLL
 
 # Optimize size but this may cause error "relocation truncated to fit"
 #EXTRALDFLAGS = -Wl,--relax
diff --git a/converter/ps2_usb/config.h b/converter/ps2_usb/config.h
index 889f0c38e..5b644002d 100644
--- a/converter/ps2_usb/config.h
+++ b/converter/ps2_usb/config.h
@@ -170,4 +170,42 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 #endif
 
+#ifdef SERIAL_MOUSE_MICROSOFT
+    /*
+     * Serial(USART) configuration (for Microsoft serial mice)
+     *     asynchronous, positive logic, 1200baud, bit order: LSB first
+     *     1-start bit, 7-data bit, no parity, 1-stop bit
+     */
+    #define SERIAL_UART_BAUD       1200
+    #define SERIAL_UART_DATA       UDR1
+    #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+    #define SERIAL_UART_RXD_VECT   USART1_RX_vect
+    #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
+    #define SERIAL_UART_INIT()     do { \
+        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
+        UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
+        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
+        UCSR1C = (1<<UCSZ11) | (0<<UCSZ10);  /* no parity, 1 stop bit, 7-bit characters */ \
+        sei(); \
+    } while(0)
+#elif defined(SERIAL_MOUSE_MOUSESYSTEMS)
+    /*
+     * Serial(USART) configuration (for Mousesystems serial mice)
+     *     asynchronous, positive logic, 1200baud, bit order: LSB first
+     *     1-start bit, 8-data bit, no parity, 1-stop bit
+     */
+    #define SERIAL_UART_BAUD       1200
+    #define SERIAL_UART_DATA       UDR1
+    #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+    #define SERIAL_UART_RXD_VECT   USART1_RX_vect
+    #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
+    #define SERIAL_UART_INIT()     do { \
+        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
+        UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
+        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
+        UCSR1C = (1<<UCSZ11) | (1<<UCSZ10);  /* no parity, 1 stop bit, 8-bit characters */ \
+        sei(); \
+    } while(0)
+#endif
+
 #endif
diff --git a/protocol.mk b/protocol.mk
index 7f561e62d..de7014e86 100644
--- a/protocol.mk
+++ b/protocol.mk
@@ -23,5 +23,25 @@ ifdef PS2_USE_USART
 endif
 
 
+ifdef SERIAL_MOUSE_MICROSOFT_ENABLE
+    SRC += $(PROTOCOL_DIR)/serial_mouse_microsoft.c
+    OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MICROSOFT \
+                -DMOUSE_ENABLE
+endif
+
+ifdef SERIAL_MOUSE_MOUSESYSTEMS_ENABLE
+    SRC += $(PROTOCOL_DIR)/serial_mouse_mousesystems.c
+    OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MOUSESYSTEMS \
+                -DMOUSE_ENABLE
+endif
+
+ifdef SERIAL_MOUSE_USE_SOFT
+    SRC += $(PROTOCOL_DIR)/serial_soft.c
+endif
+
+ifdef SERIAL_MOUSE_USE_UART
+    SRC += $(PROTOCOL_DIR)/serial_uart.c
+endif
+
 # Search Path
 VPATH += $(TOP_DIR)/protocol
diff --git a/protocol/lufa/lufa.c b/protocol/lufa/lufa.c
index 16a602df1..58201e5c9 100644
--- a/protocol/lufa/lufa.c
+++ b/protocol/lufa/lufa.c
@@ -49,6 +49,10 @@
 #endif
 #include "suspend.h"
 
+#ifdef SERIAL_MOUSE_ENABLE
+#include "serial_mouse.h"
+#endif
+
 #include "descriptor.h"
 #include "lufa.h"
 
@@ -571,6 +575,10 @@ int main(void)
     sleep_led_init();
 #endif
 
+#ifdef SERIAL_MOUSE_ENABLE
+    serial_mouse_init();
+#endif
+
     print("Keyboard start.\n");
     while (1) {
         while (USB_DeviceState == DEVICE_STATE_Suspended) {
@@ -582,6 +590,10 @@ int main(void)
 
         keyboard_task();
 
+#ifdef SERIAL_MOUSE_ENABLE
+        serial_mouse_task();
+#endif
+
 #if !defined(INTERRUPT_CONTROL_ENDPOINT)
         USB_USBTask();
 #endif
diff --git a/protocol/serial_mouse_mousesystems.c b/protocol/serial_mouse_mousesystems.c
index ec708c911..68b2b5b35 100644
--- a/protocol/serial_mouse_mousesystems.c
+++ b/protocol/serial_mouse_mousesystems.c
@@ -27,7 +27,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "print.h"
 #include "debug.h"
 
-#define SERIAL_MOUSE_CENTER_SCROLL
+//#define SERIAL_MOUSE_CENTER_SCROLL
 
 static void print_usb_data(const report_mouse_t *report);