Features/ws2812 matrix driver (#5418)

* WS2812 driver implementation for RGB Matrix

* Added driver configuration docs
master
XScorpion2 2019-04-14 20:50:35 -04:00 committed by MechMerlin
parent d7ba190cd9
commit 5fcd744ddb
11 changed files with 177 additions and 13 deletions

View File

@ -114,7 +114,7 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
endif endif
endif endif
VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 IS31FL3737 custom VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 IS31FL3737 WS2812 custom
LED_MATRIX_ENABLE ?= no LED_MATRIX_ENABLE ?= no
ifneq ($(strip $(LED_MATRIX_ENABLE)), no) ifneq ($(strip $(LED_MATRIX_ENABLE)), no)
@ -172,6 +172,11 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3737)
SRC += i2c_master.c SRC += i2c_master.c
endif endif
ifeq ($(strip $(RGB_MATRIX_ENABLE)), WS2812)
OPT_DEFS += -DWS2812
SRC += ws2812.c
endif
ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
OPT_DEFS += -DTAP_DANCE_ENABLE OPT_DEFS += -DTAP_DANCE_ENABLE
SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c

View File

@ -5,7 +5,7 @@ This feature allows you to use RGB LED matrices driven by external drivers. It h
If you want to use single color LED's you should use the [LED Matrix Subsystem](feature_led_matrix.md) instead. If you want to use single color LED's you should use the [LED Matrix Subsystem](feature_led_matrix.md) instead.
## Driver configuration ## Driver configuration
---
### IS31FL3731 ### IS31FL3731
There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`: There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
@ -52,6 +52,7 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now). Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
---
### IS31FL3733/IS31FL3737 ### IS31FL3733/IS31FL3737
!> For the IS31FL3737, replace all instances of `IS31FL3733` below with `IS31FL3737`. !> For the IS31FL3737, replace all instances of `IS31FL3733` below with `IS31FL3737`.
@ -102,6 +103,27 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now). Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now).
---
### WS2812 (AVR only)
There is basic support for addressable RGB matrix lighting with a WS2811/WS2812{a,b,c} addressable LED strand. To enable it, add this to your `rules.mk`:
```C
RGB_MATRIX_ENABLE = WS2812
```
Configure the hardware via your `config.h`:
```C
// The pin connected to the data pin of the LEDs
#define RGB_DI_PIN D7
// The number of LEDs connected
#define DRIVER_LED_TOTAL 70
```
---
From this point forward the configuration is the same for all the drivers. From this point forward the configuration is the same for all the drivers.
```C ```C

View File

@ -27,6 +27,12 @@
#include <util/delay.h> #include <util/delay.h>
#include "debug.h" #include "debug.h"
#if !defined(LED_ARRAY) && defined(RGB_MATRIX_ENABLE)
// LED color buffer
LED_TYPE led[DRIVER_LED_TOTAL];
#define LED_ARRAY led
#endif
#ifdef RGBW_BB_TWI #ifdef RGBW_BB_TWI
// Port for the I2C // Port for the I2C
@ -141,6 +147,25 @@ unsigned char I2C_Write(unsigned char c)
#endif #endif
#ifdef RGB_MATRIX_ENABLE
// Set an led in the buffer to a color
void inline ws2812_setled(int i, uint8_t r, uint8_t g, uint8_t b)
{
led[i].r = r;
led[i].g = g;
led[i].b = b;
}
void ws2812_setled_all (uint8_t r, uint8_t g, uint8_t b)
{
for (int i = 0; i < RGBLED_NUM; i++) {
led[i].r = r;
led[i].g = g;
led[i].b = b;
}
}
#endif
// Setleds for standard RGB // Setleds for standard RGB
void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds)
{ {

View File

@ -30,7 +30,6 @@
#include "rgblight_types.h" #include "rgblight_types.h"
/* User Interface /* User Interface
* *
* Input: * Input:
@ -43,6 +42,10 @@
* - Send out the LED data * - Send out the LED data
* - Wait 50<EFBFBD>s to reset the LEDs * - Wait 50<EFBFBD>s to reset the LEDs
*/ */
#ifdef RGB_MATRIX_ENABLE
void ws2812_setled (int index, uint8_t r, uint8_t g, uint8_t b);
void ws2812_setled_all (uint8_t r, uint8_t g, uint8_t b);
#endif
void ws2812_setleds (LED_TYPE *ledarray, uint16_t number_of_leds); void ws2812_setleds (LED_TYPE *ledarray, uint16_t number_of_leds);
void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask); void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask);

View File

@ -4,14 +4,15 @@
# #
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700) MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400) CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix RGBLIGHT_ENABLE = no # Enable global lighting effects. Do not enable with RGB Matrix
LED_ANIMATIONS = yes # LED animations RGBLIGHT_ANIMATIONS = no # LED animations
LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master)
RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) RGB_MATRIX_ENABLE = WS2812 # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500)
RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500)
RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port
UNICODE_ENABLE = no # Unicode UNICODE_ENABLE = no # Unicode

View File

@ -81,8 +81,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define ws2812_PORTREG PORTD #define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD #define ws2812_DDRREG DDRD
#define DRIVER_COUNT 2 #define DRIVER_COUNT 1
#define DRIVER_LED_TOTAL 70
// #define RGB_MATRIX_KEYPRESSES // #define RGB_MATRIX_KEYPRESSES
#define BACKLIGHT_PIN B7 #define BACKLIGHT_PIN B7
#define BACKLIGHT_LEVELS 5 #define BACKLIGHT_LEVELS 5
@ -92,6 +91,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#else #else
#define RGBLED_NUM 70 #define RGBLED_NUM 70
#endif #endif
#define DRIVER_LED_TOTAL RGBLED_NUM
#define RGBLIGHT_RAINBOW_SWIRL_RANGE 1950 #define RGBLIGHT_RAINBOW_SWIRL_RANGE 1950
@ -112,6 +112,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_ANIMATIONS
#define LED_HITS_TO_REMEMBER 5
#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE) #if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
// USB_MAX_POWER_CONSUMPTION value for Helix keyboard // USB_MAX_POWER_CONSUMPTION value for Helix keyboard
// 120 RGBoff, OLEDoff // 120 RGBoff, OLEDoff

View File

@ -1,6 +1,5 @@
#include "sol.h" #include "sol.h"
#ifdef SSD1306OLED #ifdef SSD1306OLED
void led_set_kb(uint8_t usb_led) { void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
@ -8,8 +7,88 @@ void led_set_kb(uint8_t usb_led) {
} }
#endif #endif
void matrix_init_kb(void) { #ifdef RGB_MATRIX_ENABLE
const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
// Left Hand Mapped Left to Right
{ { 0 | (0 << 4) }, { 0, 0 }, 1},
{ { 0 | (1 << 4) }, { 22, 0 }, 0},
{ { 0 | (2 << 4) }, { 37, 0 }, 0},
{ { 0 | (3 << 4) }, { 37, 0 }, 0},
{ { 0 | (4 << 4) }, { 67, 0 }, 0},
{ { 0 | (5 << 4) }, { 82, 0 }, 0},
{ { 0 | (6 << 4) }, { 104, 0 }, 1},
{ { 1 | (0 << 4) }, { 0, 16 }, 1},
{ { 1 | (1 << 4) }, { 22, 16 }, 0},
{ { 1 | (2 << 4) }, { 37, 16 }, 0},
{ { 1 | (3 << 4) }, { 37, 16 }, 0},
{ { 1 | (4 << 4) }, { 67, 16 }, 0},
{ { 1 | (5 << 4) }, { 82, 16 }, 0},
{ { 1 | (6 << 4) }, { 104, 16 }, 1},
{ { 2 | (0 << 4) }, { 0, 32 }, 1},
{ { 2 | (1 << 4) }, { 22, 32 }, 0},
{ { 2 | (2 << 4) }, { 37, 32 }, 0},
{ { 2 | (3 << 4) }, { 37, 32 }, 0},
{ { 2 | (4 << 4) }, { 67, 32 }, 0},
{ { 2 | (5 << 4) }, { 82, 32 }, 0},
{ { 2 | (6 << 4) }, { 104, 32 }, 1},
{ { 3 | (0 << 4) }, { 0, 48 }, 1},
{ { 3 | (1 << 4) }, { 22, 48 }, 0},
{ { 3 | (2 << 4) }, { 37, 48 }, 0},
{ { 3 | (3 << 4) }, { 37, 48 }, 0},
{ { 3 | (4 << 4) }, { 67, 48 }, 0},
{ { 3 | (5 << 4) }, { 82, 48 }, 0},
{ { 3 | (6 << 4) }, { 104, 48 }, 1},
{ { 4 | (0 << 4) }, { 0, 64 }, 1},
{ { 4 | (1 << 4) }, { 22, 64 }, 1},
{ { 4 | (2 << 4) }, { 37, 64 }, 1},
{ { 4 | (3 << 4) }, { 37, 64 }, 1},
{ { 4 | (4 << 4) }, { 67, 64 }, 1},
// These two control the 4 LEDs in the thumb cluster
// Top keys are { 4 | (5 << 4) & { 4 | (6 << 4)
{ { 5 | (5 << 4) }, { 89, 45 }, 1},
{ { 5 | (6 << 4) }, { 97, 55 }, 1},
// Left Hand Mapped Right to Left
{ { 6 | (0 << 4) }, { 224, 0 }, 1},
{ { 6 | (1 << 4) }, { 202, 0 }, 0},
{ { 6 | (2 << 4) }, { 187, 0 }, 0},
{ { 6 | (3 << 4) }, { 172, 0 }, 0},
{ { 6 | (4 << 4) }, { 157, 0 }, 0},
{ { 6 | (5 << 4) }, { 142, 0 }, 0},
{ { 6 | (6 << 4) }, { 120, 0 }, 1},
{ { 7 | (0 << 4) }, { 224, 16 }, 1},
{ { 7 | (1 << 4) }, { 202, 16 }, 0},
{ { 7 | (2 << 4) }, { 187, 16 }, 0},
{ { 7 | (3 << 4) }, { 172, 16 }, 0},
{ { 7 | (4 << 4) }, { 157, 16 }, 0},
{ { 7 | (5 << 4) }, { 142, 16 }, 0},
{ { 7 | (6 << 4) }, { 120, 16 }, 1},
{ { 8 | (0 << 4) }, { 224, 32 }, 1},
{ { 8 | (1 << 4) }, { 202, 32 }, 0},
{ { 8 | (2 << 4) }, { 187, 32 }, 0},
{ { 8 | (3 << 4) }, { 172, 32 }, 0},
{ { 8 | (4 << 4) }, { 157, 32 }, 0},
{ { 8 | (5 << 4) }, { 142, 32 }, 0},
{ { 8 | (6 << 4) }, { 120, 32 }, 1},
{ { 9 | (0 << 4) }, { 224, 48 }, 1},
{ { 9 | (1 << 4) }, { 202, 48 }, 0},
{ { 9 | (2 << 4) }, { 187, 48 }, 0},
{ { 9 | (3 << 4) }, { 172, 48 }, 0},
{ { 9 | (4 << 4) }, { 157, 48 }, 0},
{ { 9 | (5 << 4) }, { 142, 48 }, 0},
{ { 9 | (6 << 4) }, { 120, 48 }, 1},
{ { 10 | (0 << 4) }, { 224, 64 }, 1},
{ { 10 | (1 << 4) }, { 202, 64 }, 1},
{ { 10 | (2 << 4) }, { 187, 64 }, 1},
{ { 10 | (3 << 4) }, { 172, 64 }, 1},
{ { 10 | (4 << 4) }, { 157, 64 }, 1},
// These two control the 4 LEDs in the thumb cluster
// Top keys are { 10 | (5 << 4) & { 10 | (6 << 4)
{ { 11 | (5 << 4) }, { 135, 45 }, 1},
{ { 11 | (6 << 4) }, { 127, 55 }, 1}
};
#endif
void matrix_init_kb(void) {
matrix_init_user(); matrix_init_user();
}; };

View File

@ -31,6 +31,8 @@
#include "is31fl3733.h" #include "is31fl3733.h"
#elif defined (IS31FL3737) #elif defined (IS31FL3737)
#include "is31fl3737.h" #include "is31fl3737.h"
#elif defined (WS2812)
#include "ws2812.h"
#endif #endif
#ifndef RGB_MATRIX_LED_FLUSH_LIMIT #ifndef RGB_MATRIX_LED_FLUSH_LIMIT

View File

@ -97,4 +97,25 @@ const rgb_matrix_driver_t rgb_matrix_driver = {
}; };
#endif #endif
#elif defined(WS2812)
extern LED_TYPE led[RGBLED_NUM];
static void flush( void )
{
// Assumes use of RGB_DI_PIN
ws2812_setleds(led, RGBLED_NUM);
}
static void init( void )
{
}
const rgb_matrix_driver_t rgb_matrix_driver = {
.init = init,
.flush = flush,
.set_color = ws2812_setled,
.set_color_all = ws2812_setled_all,
};
#endif #endif

View File

@ -63,7 +63,11 @@ const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
rgblight_config_t rgblight_config; rgblight_config_t rgblight_config;
bool is_rgblight_initialized = false; bool is_rgblight_initialized = false;
#ifndef LED_ARRAY
LED_TYPE led[RGBLED_NUM]; LED_TYPE led[RGBLED_NUM];
#define LED_ARRAY led
#endif
bool rgblight_timer_enabled = false; bool rgblight_timer_enabled = false;
static uint8_t clipping_start_pos = 0; static uint8_t clipping_start_pos = 0;

View File

@ -11,5 +11,5 @@ MOUSEKEY_ENABLE = no
EXTRAKEY_ENABLE = yes EXTRAKEY_ENABLE = yes
COMMAND_ENABLE = yes COMMAND_ENABLE = yes
CONSOLE_ENABLE = yes CONSOLE_ENABLE = yes
RGBLIGHT_ENABLE = yes RGBLIGHT_ENABLE = no
RGBLIGHT_ANIMATIONS = yes RGBLIGHT_ANIMATIONS = yes