History

Ryan c6f1b594a2 Remove legacy keycodes, part 2 (#18660 ) * `KC_SYSREQ` -> `KC_SYRQ` And one `KC_ALT_ERASE` -> `KC_ERAS` * `KC_NONUS_BSLASH` -> `KC_NUBS` * `KC_NUMLOCK` -> `KC_NUM` * `KC_CLCK` -> `KC_CAPS` * `KC_SCROLLLOCK` -> `KC_SCRL` * `KC_LBRACKET` -> `KC_LBRC` * `KC_RBRACKET` -> `KC_RBRC` * `KC_CAPSLOCK` -> `KC_CAPS`		2022-10-10 20:06:26 +01:00
..
keymaps	Remove legacy keycodes, part 2 (#18660 )	2022-10-10 20:06:26 +01:00
chconf.h	…
config.h	Remove `UNUSED_PINS` (#17931 )	2022-08-06 23:23:35 +10:00
e80_1800.c	…
e80_1800.h	…
halconf.h	…
info.json	…
mcuconf.h	…
readme.md	…
rules.mk	…

readme.md

E80-1800

A replacement PCB for the Cherry G80-1800 keyboard. Supports ISO and ANSI, 6u offcenter or 7u bottom row, stepped and regular caps lock. Optional i2c header for OLED. Type-C on the PCB (requires some case modifications). The PCB is open source and can be found in my Github repo.

Keyboard Maintainer: ebastler
Hardware Supported: r1 and r1.1 PCB, see Github repo linked above
Hardware Availability: Groupbuy, otherwise feel free to order your own boards. jlcpcb compatible gerber/BOM/CPL files are included.

How to enter the Bootloader:

No pre-flashed firmware, option 1: Bridge BOOT labeled pads below spacebar while plugging the board in
No pre-flashed firmware, option 2: Bridge BOOT labeled pads below spacebar, then quickly short RST labeled pads
Pre-flashed firmware: Use Bootmagic - keep the ESC (top left most) key pressed while plugging the board in

Make example for this keyboard (after setting up your build environment):

make ebastler/e80_1800:default

Flash example for this keyboard (after setting up your build environment):

make ebastler/e80_1800:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.