g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/4pplet/waffling60/rev_d_ansi
History
Nick Brassel 416af0171c
Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 
* Remove CORTEX_ENABLE_WFI_IDLE from the codebase.

* Turn on CORTEX_ENABLE_WFI_IDLE by default.
 		2023-06-23 20:31:25 +01:00
..
keymaps
…
info.json Move single `LAYOUT`s to data driven (#20365) 2023-04-12 13:42:51 +10:00
readme.md
…
rules.mk Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 2023-06-23 20:31:25 +01:00

readme.md

waffling60

A 60% PCB for MX and alps switches, available in different configurations and layout supports.

More info: https://geekhack.org/index.php?topic=103531.0

Make example for this keyboard (after setting up your build environment):

make 4pplet/waffling60/rev_d_ansi:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.

  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it or tap the reset button.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Esc key, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.