643f6367a1
* Add missing '(' to print_bin_reverse32 declaration
* Fix insufficient character buffers on satisfaction75
* Remove \0 character in format string and use corrected offset math
instead on rocketboard 16
* Replace snprintf_ with snprintf for djinn
* Explicitly ignore format checks for tracktyl manuform that uses %b
specifier
* Print properly escaped version string in command.c, as PRODUCT or
other defines can contain constructs like 'Vendor keyboard 66%' which
will be interpreted as a format specifier
|
||
|---|---|---|
| .. | ||
| 4x6_right | ||
| 5x6_right | ||
| config.h | ||
| info.json | ||
| post_config.h | ||
| readme.md | ||
| tractyl_manuform.c | ||
| tractyl_manuform.h | ||
readme.md
Tractyl Manuform (4x6, 5x6)
the Dactyl-Manuform is a split curved keyboard based on the design of adereth dactyl and thumb cluster design of the manuform keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
- Keyboard Maintainer: drashna
- Hardware Supported: Teensy 2.0++, WeAct BlackPill F411
Make example for this keyboard (after setting up your build environment):
make handwired/tractyl_manuform/5x6_right/f411/drashna:default
Flashing example for this keyboard:
make handwired/tractyl_manuform/5x6_right/f411/drashna:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
RESETif it is available