qmk_firmware/keyboards/rgbkb/mun
Joel Challis 85289e34ae
Various fixes for g_led_config lint warnings (#17104)
2022-05-16 09:40:56 +10:00
..
keymaps RESET -> QK_BOOT default keymaps (#17037) 2022-05-15 20:26:27 +01:00
rev1 Various fixes for g_led_config lint warnings (#17104) 2022-05-16 09:40:56 +10:00
.noci
config.h Remove 1k USB_POLLING_INTERVAL_MS config from keyboards and default-ish keymaps (#16448) 2022-02-26 03:20:57 +00:00
halconf.h Tidy up rgbkb/mun (#13801) 2021-08-05 00:59:50 +01:00
matrix.c Doc Fixes & Custom Matrix Fix (#14526) 2021-09-20 06:18:32 +10:00
mcuconf.h Tidy up rgbkb/mun (#13801) 2021-08-05 00:59:50 +01:00
mun.c Tidy up rgbkb/mun (#13801) 2021-08-05 00:59:50 +01:00
mun.h
readme.md
rules.mk Remove parent-relative paths from keyboards. (#16282) 2022-02-10 07:02:53 +11:00

readme.md

Mün

Mün

Mün is powered by STM32 with full QMK support. Each key has super-bright RGB backlighting and MX Kailh hotswap sockets. No soldering is required to get a fully functioning keyboard. There are an additional 14 rear-facing RGB LEDs on each side. Each half can be configured to run as master or slave with the two USB-C ports. They also support up to two rotary encoders and one OLED panel per half.

Keyboard Maintainer: Legonut
Hardware Supported: Mün PCB R1.0, R1.1, R1.2 Hardware Availability: RGBKB

Make example for this keyboard (after setting up your build environment):

make rgbkb/mun:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.