History

Drashna Jaelre 00b6f14821 Replace outdated RGB/Audio information		2018-10-22 14:55:05 -04:00
..
config.h	Make `PREVENT_STUCK_MODIFIERS` the default (#3107 )	2018-09-17 13:48:02 -04:00
keymap.c	Reformat 40% Ortho boards to work with Layouts feature (#2804 )	2018-05-14 10:11:12 -04:00
readme.md	Update readme.md	2017-03-22 15:56:45 -04:00
rules.mk	Replace outdated RGB/Audio information	2018-10-22 14:55:05 -04:00

readme.md

SSD1306 OLED Display via I2C

Features

Some features supported by the firmware:

I2C connection between the two halves is required as the OLED display will use this connection as well. Note this requires pull-up resistors on the data and clock lines.
OLED display will connect from either side

Wiring

Work in progress...

OLED Configuration

Work in progress...