f2c179de58
* Remove superfluous JTAG disable code * 32A has differently named register * Accidentally some operators * 32A also has different JTAG pins * Wrap disable_jtag() in an ifndef * Document this new define * Rename the define, it conflicts with a LUFA thing Also, move the ifndef wrapping to the call in keyboard_setup() |
||
|---|---|---|
| .. | ||
| keymaps | ||
| config.h | ||
| ergodone.c | ||
| ergodone.h | ||
| expander.c | ||
| expander.h | ||
| i2cmaster.h | ||
| info.json | ||
| matrix.c | ||
| readme.md | ||
| rules.mk | ||
| twimaster.c | ||
readme.md
ErgoDone
The ErgoDone is a modified version of the ErgoDox, made by K.T.E.C., with pre-soldered components. It has different wiring and uses a SparkFun Pro Micro instead of Teensy.
- Keyboard maintainer: Yu He
- Hardware supported:
- ErgoDone v1.3 (tested)
- Hardware availability:
Building the firmware
In the root directory of the repository, build the firmware with a command like:
make ergodone:default
For more information on the layout option and other ones, see the make guide.
Flashing the firmware onto the keyboard
The ErgoDone uses a customized HID bootloader rather than the Teensy one. It doesn't need an OS driver, and the required actions before flashing are a little different than with an ErgoDox.
-
To enter flash mode, disconnect the keyboard first. Then, on the left-hand device, in the top row, press and hold the two rightmost keys while reconnecting the keyboard.
-
To flash the .hex file, use the
hid_bootloader_cliutlity from the TKG Toolkit (as of 2017-10-03, only this old version works under Windows):hid_bootloader_cli -mmcu=atmega32u4 ergodone_default.hex