g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/handwired/snatchpad
History
James Young 89b9a39614
Migrate `LOCKING_*_ENABLE` to Data-Driven: H, Part 4 (#23764) 
Affects:

  - `handwired/reclined`
  - `handwired/retro_refit`
  - `handwired/selene`
  - `handwired/sick68`
  - `handwired/sick_pad`
  - `handwired/skakunm_dactyl`
  - `handwired/slash`
  - `handwired/snatchpad`
  - `handwired/sono1`
  - `handwired/space_oddity`
  - `handwired/split89`
  - `handwired/split_cloud`
  - `handwired/steamvan/rev1`
  - `handwired/sticc14`
  - `handwired/stream_cheap/2x3`
  - `handwired/stream_cheap/2x4`
  - `handwired/stream_cheap/2x5`
  - `handwired/symmetric70_proto/promicro`
  - `handwired/symmetric70_proto/proton_c`
  - `handwired/symmetry60`
  - `handwired/tennie`
  - `handwired/terminus_mini`
  - `handwired/trackpoint`
  - `handwired/tritium_numpad`
  - `handwired/twadlee/tp69`
  - `handwired/unk/rev1`
  - `handwired/uthol/rev3`
  - `handwired/videowriter`
  - `handwired/wabi`
  - `handwired/woodpad`
 		2024-05-21 23:57:59 +01:00
..
keymaps/default
…
keyboard.json Migrate `LOCKING_*_ENABLE` to Data-Driven: H, Part 4 (#23764) 2024-05-21 23:57:59 +01:00
readme.md
…
snatchpad.c
…

readme.md

snatchpad

snatchpad etch-a-sketch macropad

A 6-key macropad with 2 rotary encoders intended for use as a pointing device.

In addition to the 3d printed parts and microcontroller, the following hardware is required:

  • 4 * 3x3 mm threaded inserts
  • 4 * 4mm M3 bolt
  • USB daughter board
  • Keyboard Maintainer: xia0
  • Hardware Supported: e.g. Arduino Pro Micro
  • Hardware Availability: github

Make example for this keyboard (after setting up your build environment):

make handwired/snatchpad:default

Flashing example for this keyboard:

make handwired/snatchpad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available