qmk_firmware/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c

199 lines
7.5 KiB
C

#include QMK_KEYBOARD_H
#include "bootloader.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
enum layer_names {
_QWERTY,
_LOWER,
_RAISE,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
RGBRST,
MBTN1,
SCRL
};
#define KC_LOWER LOWER
#define KC_RAISE RAISE
#define KC_RST QK_BOOT
#define KC_LRST RGBRST
#define KC_LTOG RGB_TOG
#define KC_LHUI RGB_HUI
#define KC_LHUD RGB_HUD
#define KC_LSAI RGB_SAI
#define KC_LSAD RGB_SAD
#define KC_LVAI RGB_VAI
#define KC_LVAD RGB_VAD
#define KC_LMOD RGB_MOD
#define KC_CTLA CTL_T(KC_A)
#define KC_CTLSC CTL_T(KC_SCLN)
#define KC_SFTZ SFT_T(KC_Z)
#define KC_SFTSL SFT_T(KC_SLSH)
#define KC_WINX LWIN_T(KC_X)
#define KC_WINDO RWIN_T(KC_DOT)
#define KC_MBTN1 MBTN1
#define KC_SCRL SCRL
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_TAB, KC_CTLA, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_CTLSC, KC_QUOT,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_GRAVE, KC_SFTZ, KC_WINX, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_WINDO, KC_SFTSL,KC_BSLS,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
KC_LOWER, KC_SPC, KC_SCRL, KC_MBTN1, KC_ENT, KC_RAISE
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
KC_ESC, XXXXXXX, KC_PGDN, KC_PSCR, KC_PGUP, KC_LBRC, KC_RBRC, KC_7, KC_8, KC_9, XXXXXXX, XXXXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
XXXXXXX, KC_LCTRL, KC_PLUS, KC_MINS, KC_EQL, KC_LPRN, KC_RPRN, KC_4, KC_5, KC_6, KC_RCTRL, XXXXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
XXXXXXX, KC_LSFT, KC_HOME, XXXXXXX, KC_END, KC_LCBR, KC_RCBR, KC_1, KC_2, KC_3, KC_RSFT, XXXXXXX,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
KC_LOWER, KC_SPC, KC_SCRL, KC_MBTN1, KC_ENT, KC_0
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
KC_ESC, XXXXXXX, KC_F7, KC_F8, KC_F9, KC_F10, KC_BTN2, KC_BTN2, KC_MNXT, KC_MPRV, KC_MPLY, KC_MSTP,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
XXXXXXX, KC_LCTRL, KC_F4, KC_F5, KC_F6, KC_F11, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_RCTRL, XXXXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
XXXXXXX, KC_LSFT, KC_F1, KC_F2, KC_F3, KC_F12, XXXXXXX, XXXXXXX, KC_VOLU, KC_VOLD, KC_MUTE, KC_RSFT,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
KC_LOWER, KC_SPC, KC_SCRL, KC_MBTN1, KC_ENT, KC_RAISE
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
KC_RST, KC_LRST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_RST,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_LTOG, KC_LHUI, KC_LSAI, KC_LVAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_LMOD, KC_LHUD, KC_LSAD, KC_LVAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
KC_LOWER, KC_SPC, KC_SCRL, KC_MBTN1, KC_ENT, KC_RAISE
//`--------------------' `--------------------'
)
};
int RGB_current_mode;
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
}
#ifdef OLED_ENABLE
// When add source files to SRC in rules.mk, you can use functions.
const char *read_layer_state(void);
const char *read_logo(void);
void set_keylog(uint16_t keycode, keyrecord_t *record);
const char *read_keylog(void);
const char *read_keylogs(void);
bool oled_task_user(void) {
if (is_keyboard_master()) {
// If you want to change the display of OLED, you need to change here
oled_write_ln(read_layer_state(), false);
oled_write_ln(read_keylog(), false);
oled_write_ln(read_keylogs(), false);
} else {
oled_write(read_logo(), false);
}
return false;
}
#endif
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
#ifdef OLED_ENABLE
set_keylog(keycode, record);
#endif
}
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
case RGB_MOD:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
#endif
return false;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
#endif
break;
}
return true;
}