qmk_firmware/keyboards/helix/pico/pico.h

66 lines
1.9 KiB
C

#ifndef PICO_H
#define PICO_CONFIG_H
#include "../helix.h"
//void promicro_bootloader_jmp(bool program);
#include "quantum.h"
#ifdef RGBLIGHT_ENABLE
//rgb led driver
#include "ws2812.h"
#endif
#ifdef USE_I2C
#include <stddef.h>
#ifdef __AVR__
#include <avr/io.h>
#include <avr/interrupt.h>
#endif
#endif
//void promicro_bootloader_jmp(bool program);
#ifndef FLIP_HALF
// Standard Keymap
// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35 \
) \
{ \
{ L00, L01, L02, L03, L04, L05, KC_NO }, \
{ L10, L11, L12, L13, L14, L15, KC_NO }, \
{ L20, L21, L22, L23, L24, L25, KC_NO }, \
{ L30, L31, L32, L33, L34, L35, L36 }, \
{ R05, R04, R03, R02, R01, R00, KC_NO }, \
{ R15, R14, R13, R12, R11, R10, KC_NO }, \
{ R25, R24, R23, R22, R21, R20, KC_NO }, \
{ R35, R34, R33, R32, R31, R30, R36 }, \
}
#else
// Keymap with right side flipped
// (TRRS jack on both halves are to the right)
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
L30, L31, L32, L33, L34, L35, L36, R36, R30, R31, R32, R33, R34, R35 \
) \
{ \
{ L00, L01, L02, L03, L04, L05, KC_NO }, \
{ L10, L11, L12, L13, L14, L15, KC_NO }, \
{ L20, L21, L22, L23, L24, L25, KC_NO }, \
{ L30, L31, L32, L33, L34, L35, L36 }, \
{ KC_NO, R00, R01, R02, R03, R04, R05 }, \
{ KC_NO, R10, R11, R12, R13, R14, R15 }, \
{ KC_NO, R20, R21, R22, R23, R24, R25 }, \
{ R36, R30, R31, R32, R33, R34, R35 }, \
}
#endif
#endif