qmk_firmware/users/drashna/config.h

116 lines
3.5 KiB
C

// Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#ifdef IS_COMMAND
# undef IS_COMMAND
#endif
#define IS_COMMAND() (((get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT) == MOD_MASK_SHIFT)
#if defined(SPLIT_KEYBOARD)
# include "split/split_config.h"
#endif
#ifdef RGBLIGHT_ENABLE
# include "rgb/rgblight_config.h"
#endif // RGBLIGHT_ENABLE
#ifdef RGB_MATRIX_ENABLE
# include "rgb/rgb_matrix_config.h"
#endif // RGB_MATRIX_ENABLE
#ifdef OLED_ENABLE
# include "oled/oled_config.h"
#endif
#ifdef POINTING_DEVICE_ENABLE
# include "pointing/pointing_config.h"
#endif // POINTING_DEVICE_ENABLE
#ifdef AUDIO_ENABLE
# include "audio_config.h"
#endif // AUDIO_ENABLE
#if defined(WPM_ENABLE)
// # define WPM_LAUNCH_CONTROL
// # define WPM_UNFILTERED
# define WPM_ALLOW_COUNT_REGRESSION
# define WPM_SAMPLE_SECONDS 10
# define WPM_SAMPLE_PERIODS 50
# define WPM_ESTIMATED_WORD_SIZE 5
#endif
#define UNICODE_SELECTED_MODES UNICODE_MODE_WINCOMPOSE, UNICODE_MODE_MACOS
#ifndef ONESHOT_TAP_TOGGLE
# define ONESHOT_TAP_TOGGLE 2
#endif // !ONESHOT_TAP_TOGGLE
#ifndef ONESHOT_TIMEOUT
# define ONESHOT_TIMEOUT 3000
#endif // !ONESHOT_TIMEOUT
#if defined(PER_KEY_TAPPING)
# define PERMISSIVE_HOLD_PER_KEY
# define QUICK_TAP_TERM_PER_KEY
# define HOLD_ON_OTHER_KEY
# define RETRO_TAPPING_PER_KEY
# define HOLD_ON_OTHER_KEY_PRESS_PER_KEY
# define TAPPING_TERM_PER_KEY
#else
# undef PERMISSIVE_HOLD
#endif
#ifndef TAPPING_TOGGLE
# define TAPPING_TOGGLE 1
#endif
#define TAP_CODE_DELAY 5
/* Disable unused and unneeded features to reduce on firmware size */
#ifdef LOCKING_SUPPORT_ENABLE
# undef LOCKING_SUPPORT_ENABLE
#endif
#ifdef LOCKING_RESYNC_ENABLE
# undef LOCKING_RESYNC_ENABLE
#endif
#ifdef CONVERT_TO_PROTON_C
// pins that are available but not present on Pro Micro
# define A3 PAL_LINE(GPIOA, 3)
# define A4 PAL_LINE(GPIOA, 4)
# define A5 PAL_LINE(GPIOA, 5)
# define A6 PAL_LINE(GPIOA, 6)
# define A7 PAL_LINE(GPIOA, 7)
# define A8 PAL_LINE(GPIOA, 8)
# define A13 PAL_LINE(GPIOA, 13)
# define A14 PAL_LINE(GPIOA, 14)
# define A15 PAL_LINE(GPIOA, 15)
# define B10 PAL_LINE(GPIOB, 10)
# define B11 PAL_LINE(GPIOB, 11)
# define B12 PAL_LINE(GPIOB, 12)
# define C13 PAL_LINE(GPIOC, 13)
# define C14 PAL_LINE(GPIOC, 14)
# define C15 PAL_LINE(GPIOC, 15)
#endif
#define ENABLE_COMPILE_KEYCODE
#define BOTH_SHIFTS_TURNS_ON_CAPS_WORD
/* --- PRINTF_BYTE_TO_BINARY macro's --- */
#define PRINTF_BINARY_PATTERN_INT8 "%c%c%c%c%c%c%c%c"
#define PRINTF_BYTE_TO_BINARY_INT8(i) (((i)&0x80ll) ? '1' : '0'), (((i)&0x40ll) ? '1' : '0'), (((i)&0x20ll) ? '1' : '0'), (((i)&0x10ll) ? '1' : '0'), (((i)&0x08ll) ? '1' : '0'), (((i)&0x04ll) ? '1' : '0'), (((i)&0x02ll) ? '1' : '0'), (((i)&0x01ll) ? '1' : '0')
#define PRINTF_BINARY_PATTERN_INT16 PRINTF_BINARY_PATTERN_INT8 " " PRINTF_BINARY_PATTERN_INT8
#define PRINTF_BYTE_TO_BINARY_INT16(i) PRINTF_BYTE_TO_BINARY_INT8((i) >> 8), PRINTF_BYTE_TO_BINARY_INT8(i)
#define PRINTF_BINARY_PATTERN_INT32 PRINTF_BINARY_PATTERN_INT16 " " PRINTF_BINARY_PATTERN_INT16
#define PRINTF_BYTE_TO_BINARY_INT32(i) PRINTF_BYTE_TO_BINARY_INT16((i) >> 16), PRINTF_BYTE_TO_BINARY_INT16(i)
#define PRINTF_BINARY_PATTERN_INT64 PRINTF_BINARY_PATTERN_INT32 " " PRINTF_BINARY_PATTERN_INT32
#define PRINTF_BYTE_TO_BINARY_INT64(i) PRINTF_BYTE_TO_BINARY_INT32((i) >> 32), PRINTF_BYTE_TO_BINARY_INT32(i)
/* --- end macros --- */
#ifndef EECONFIG_USER_DATA_SIZE
# define EECONFIG_USER_DATA_SIZE 8
#endif