g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/handwired/axon
History
Ryan 5af1799735
Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 		2021-09-12 15:27:29 +10:00
..
keymaps/default [Keyboard] Add Axon (#12879) 2021-05-13 10:12:45 -07:00
axon.c [Keyboard] Add Axon (#12879) 2021-05-13 10:12:45 -07:00
axon.h [Keyboard] Add Axon (#12879) 2021-05-13 10:12:45 -07:00
config.h [Keyboard] Add Axon (#12879) 2021-05-13 10:12:45 -07:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md [Keyboard] Add Axon (#12879) 2021-05-13 10:12:45 -07:00
rules.mk Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2021-09-12 15:27:29 +10:00

readme.md

Axon

Axon

Axon v1.0 built with Durock T1 and GMK Bento

Axon is a compact 40% which uses through-hole components. Hardware repo can be found at https://github.com/thatfellarobin/axon.

Make example for this keyboard (after setting up your build environment):

make handwired/axon:default

To reset into bootloader mode:

  1. While plugged in, press and hold BOOT switch
  2. While holding BOOT, press RESET and hold it for a second or two
  3. Release RESET
  4. Release BOOT
  5. The keyboard should now be recognized as a USBasp programmer device.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.