History

Ryan 47966dc2a6 Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303 )		2023-04-06 18:00:54 +10:00
..
keymaps	…
config.h	Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303 )	2023-04-06 18:00:54 +10:00
info.json	Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303 )	2023-04-06 18:00:54 +10:00
readme.md	…
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00
tutelpad.c	Move layouts for direct_pins boards to data driven (#19872 )	2023-02-19 18:55:12 +11:00

readme.md

TutelPad macropad

Keyboard Maintainer: ItsFiremanSam
Hardware Supported: TutelPad GitHub
Hardware Availability: KeebSupply

Bootloader

You can enter the bootloader by pressing the reset switch on the side while the keyboard is plugged in. You can also short the GND and RST pads on the controller.

Make example for this keyboard (after setting up your build environment):

make 0xcb/tutelpad:default

Flashing example for this keyboard:

make 0xcb/tutelpad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.