g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/wuque/mammoth75x
History
Ryan 6847dba8af
Move 75% and 96% layouts to data driven (#20289) 		2023-04-05 15:48:37 +10:00
..
keymaps RESET -> QK_BOOT default keymaps (#17939) 2022-08-07 02:23:58 +01:00
config.h Move matrix config to info.json, part 5 (#20003) 2023-03-11 05:41:58 +11:00
info.json Move 75% and 96% layouts to data driven (#20289) 2023-04-05 15:48:37 +10:00
mammoth75x.c Move 75% and 96% layouts to data driven (#20289) 2023-04-05 15:48:37 +10:00
readme.md Remove invalid characters (#20277) 2023-03-28 14:33:00 +01:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

mammoth75x

mammoth75x

More Info at wuquestudio.

  • Keyboard Maintainer: spbgzh
  • Hardware Supported: mammoth75x Standard
  • Hardware Availability: mammoth75x

Make example for this keyboard (after setting up your build environment):

make wuque/mammoth75x:default

Flashing example for this keyboard:

make wuque/mammoth75x:default:flash

To reset the board into bootloader mode, do one of the following:

  • Tap the Reset switch mounted on the PCB
  • In the case of the default keymap, use the key combination Fn + PageUp
  • Hold the Esc key while connecting the USB cable (also erases persistent settings)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.