qmk_firmware/keyboards/keebio/levinson
Dasky dc4af81e0b
Remove legacy USE_SERIAL define (#18292)
* Remove legacy USE_SERIAL define

* tidy up missed comments
2022-09-06 18:46:34 +01:00
..
keymaps Remove legacy USE_SERIAL define (#18292) 2022-09-06 18:46:34 +01:00
rev1 Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 2022-08-20 10:39:35 +10:00
rev2 Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 2022-08-20 10:39:35 +10:00
rev3 Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 2022-08-20 10:39:35 +10:00
.noci
config.h
info.json Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 2022-08-20 10:39:35 +10:00
levinson.c
levinson.h
readme.md
rules.mk

readme.md

Levinson

A split 40% split 4x12 ortholinear keyboard made and sold by Keebio. It's essentially a Let's Split with LED backlight support and 2u thumb key support. More info at Keebio.

Keyboard Maintainer: Bakingpy/nooges
Hardware Supported: Pro Micro, Elite-C
Hardware Availability: Keebio

Make example for this keyboard (after setting up your build environment):

make keebio/levinson/rev3:default

Example of flashing this keyboard with Pro micro:

make keebio/levinson/rev3:default:avrdude

Example of flashing this keyboard with Elite-C:

You'll need to add BOOTLOADER = atmel-dfu to your rules.mk to ensure that resetting the board works properly.

Hold the reset button on the Elite-C board, or the reset button on the keyboard if already assembled, then release the button and run:

make keebio/levinson/rev3:default:dfu

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

A build guide for this keyboard can be found here: Levinson Build Guide