g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/handwired/tractyl_manuform/5x6_right/f411
History
Drashna Jaelre 82bf688e44
[Keyboard] Update Tractyl Manuform config for F411 (#14770) 		2021-10-09 11:31:13 -07:00
..
chconf.h
…
config.h [Keyboard] Update Tractyl Manuform config for F411 (#14770) 2021-10-09 11:31:13 -07:00
f411.c [Keyboard] Update Tractyl Manuform config for F411 (#14770) 2021-10-09 11:31:13 -07:00
f411.h
…
halconf.h [Keyboard] Updates for Tractyl Manuform config (#14641) 2021-09-29 09:30:25 -07:00
mcuconf.h [Keyboard] Update Tractyl Manuform config for F411 (#14770) 2021-10-09 11:31:13 -07:00
readme.md [Keyboard] Update Tractyl Manuform config for F411 (#14770) 2021-10-09 11:31:13 -07:00
rules.mk
…

readme.md

Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball

  • VBUS mod, using PB10

  • Split Hand Pin, using PC14

  • Full Duplex Serial/USART using PA3 and PA4 on USART2

  • PWM Audio using PB1 and TIM3 and GPT on TIM4

  • PWM RGB using PA1 TIM2

  • pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin

  • 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin

  • Encoder using PA13 and PA14

  • SSD1306 OLED display (128x64) using PB8-PB9 on I2C1

  • Pull-up resistor (22k) on A10 to fix reset issue.

  • Keyboard Maintainer: Drashna Jael're

  • Hardware Supported: Design files, WeAct BlackPill (F411), PMW3360 Optical Sensor

Make example for this keyboard (after setting up your build environment):

make handwired/tractyl_manuform/5x6_right/f411:default

Flashing example for this keyboard:

make handwired/tractyl_manuform/5x6_right/f411:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.