g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/unikorn
History
MechMerlin cbf76a1290 [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 
* initial commit, copied from singa

* default 60_ansi LAYOUT implemented and tested workin

* add rgb underglow support bounded by ifdefs

* edit readme to provide information on reset procedure and on rgb underglow support

* improve the default keymap to have a second layer with function keys and even a RESET

* Add LAYOUT_all macro and discovered that split backspace uses an additional pin on the microcontroller

* fix up last line in readme

* Add QMK Configurator support
 		2019-07-05 04:54:59 -07:00
..
keymaps/default [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 2019-07-05 04:54:59 -07:00
config.h [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 2019-07-05 04:54:59 -07:00
info.json [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 2019-07-05 04:54:59 -07:00
readme.md [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 2019-07-05 04:54:59 -07:00
rules.mk [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 2019-07-05 04:54:59 -07:00
unikorn.c [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 2019-07-05 04:54:59 -07:00
unikorn.h [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 2019-07-05 04:54:59 -07:00
usbconfig.h [Keyboard] Add TGR x SINGA Unikorn 60 (#6249) 2019-07-05 04:54:59 -07:00

readme.md

Unikorn 60

60% PCB made for the TGR x SINGA Unikorn60.

Keyboard Maintainer: MechMerlin
Hardware Supported: Unikorn 60 PCB
Hardware Availability: Geekhack GB

Make example for this keyboard (after setting up your build environment):

make unikorn:default

This PCB can support RGB underglow. There are pads on the bottom of the PCB for the LED controller chip and for 17 RGB underglow LEDs. The Unikorn 60 case does not have acrylic pieces to properly display underglow effects.

To enable RGB lighting support, install the necessary components and set RGBLIGHT features in rules.mk like so:

RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Short the two holes labeled FW_JP beside the Tab key. At this time there is no reset key to press.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

  2. Install crosspack-avr.

    brew cask install crosspack-avr

  3. Install the following packages:

    brew install python3
pip3 install pyusb
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb

  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.