qmk_firmware/keyboards/kudox_full
Ryan b727434391
Remove commented out backlight config & stray "backlight levels" (#19703)
2023-01-28 15:42:44 +00:00
..
keymaps Remove legacy international keycodes (#18588) 2022-10-09 14:51:09 +11:00
rev1 Remove commented out backlight config & stray "backlight levels" (#19703) 2023-01-28 15:42:44 +00:00
config.h
kudox_full.c
kudox_full.h
post_config.h
readme.md
rules.mk

readme.md

The Kudox Full keyboard

Kudox logo

Kudox Full image2 Kudox Full image1
front angle

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

Building Firmware

Make example for this keyboard (after setting up your build environment):

make kudox_full/rev1:default

Flashing example for this keyboard:

make kudox_full/rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.