qmk_firmware/platforms/arm_atsam/gpio.h

82 lines
3.9 KiB
C

/* Copyright 2021 QMK
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <stdint.h>
#include "samd51j18a.h"
#include "pin_defs.h"
typedef uint8_t pin_t;
#define SAMD_PORT(pin) (((pin)&0x20) >> 5)
#define SAMD_PIN(pin) ((pin)&0x1f)
#define SAMD_PIN_MASK(pin) (1 << ((pin)&0x1f))
#define gpio_set_pin_input(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].PINCFG[SAMD_PIN(pin)].bit.INEN = 1; \
PORT->Group[SAMD_PORT(pin)].DIRCLR.reg = SAMD_PIN_MASK(pin); \
} while (0)
#define gpio_set_pin_input_high(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].DIRCLR.reg = SAMD_PIN_MASK(pin); \
PORT->Group[SAMD_PORT(pin)].OUTSET.reg = SAMD_PIN_MASK(pin); \
PORT->Group[SAMD_PORT(pin)].PINCFG[SAMD_PIN(pin)].bit.INEN = 1; \
PORT->Group[SAMD_PORT(pin)].PINCFG[SAMD_PIN(pin)].bit.PULLEN = 1; \
} while (0)
#define gpio_set_pin_input_low(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].DIRCLR.reg = SAMD_PIN_MASK(pin); \
PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \
PORT->Group[SAMD_PORT(pin)].PINCFG[SAMD_PIN(pin)].bit.INEN = 1; \
PORT->Group[SAMD_PORT(pin)].PINCFG[SAMD_PIN(pin)].bit.PULLEN = 1; \
} while (0)
#define gpio_set_pin_output_push_pull(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].DIRSET.reg = SAMD_PIN_MASK(pin); \
PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \
} while (0)
#define gpio_set_pin_output_open_drain(pin) _Static_assert(0, "Open-drain outputs are not available on ATSAM")
#define gpio_set_pin_output(pin) gpio_set_pin_output_push_pull(pin)
#define gpio_write_pin_high(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].OUTSET.reg = SAMD_PIN_MASK(pin); \
} while (0)
#define gpio_write_pin_low(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \
} while (0)
#define gpio_write_pin(pin, level) \
do { \
if (level) \
PORT->Group[SAMD_PORT(pin)].OUTSET.reg = SAMD_PIN_MASK(pin); \
else \
PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \
} while (0)
#define gpio_read_pin(pin) ((PORT->Group[SAMD_PORT(pin)].IN.reg & SAMD_PIN_MASK(pin)) != 0)
#define gpio_toggle_pin(pin) (PORT->Group[SAMD_PORT(pin)].OUTTGL.reg = SAMD_PIN_MASK(pin))