g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/system76/launch_1
History
James Young 0094a6f571
Migrate `LOCKING_*_ENABLE` to Data-Driven: S, Part 2 (#23784) 
Affects:

  - `slz40`
  - `smithrune/iron160/iron160_s`
  - `smithrune/iron165r2/f072`
  - `smithrune/iron165r2/f411`
  - `smithrune/iron180`
  - `smithrune/iron180v2/v2h`
  - `smithrune/iron180v2/v2s`
  - `smoll/lefty`
  - `snampad`
  - `sneakbox/aliceclone`
  - `sneakbox/disarray/ortho`
  - `sneakbox/disarray/staggered`
  - `soup10`
  - `soy20`
  - `sparrow62`
  - `split67`
  - `splitish`
  - `splitography`
  - `star75`
  - `stello65/beta`
  - `stello65/hs_rev1`
  - `stello65/sl_rev1`
  - `stenokeyboards/the_uni/pro_micro`
  - `stenokeyboards/the_uni/usb_c`
  - `strech/soulstone`
  - `studiokestra/bourgeau`
  - `studiokestra/cascade`
  - `studiokestra/frl84`
  - `studiokestra/galatea/rev1`
  - `studiokestra/galatea/rev2`
  - `studiokestra/galatea/rev3`
  - `studiokestra/line_friends_tkl`
  - `studiokestra/nascent`
  - `studiokestra/nue`
  - `suavity/ehan`
  - `subatomic`
  - `switchplate/southpaw_65`
  - `switchplate/southpaw_fullsize`
  - `switchplate/switchplate910`
  - `sx60`
  - `system76/launch_1`
 		2024-05-23 20:34:56 +01:00
..
keymaps/default Adjust keycode alignment around `QK_BOOT` (#23697) 2024-05-11 16:50:48 +01:00
config.h Migrate `LOCKING_*_ENABLE` to Data-Driven: S, Part 2 (#23784) 2024-05-23 20:34:56 +01:00
keyboard.json Migrate `LOCKING_*_ENABLE` to Data-Driven: S, Part 2 (#23784) 2024-05-23 20:34:56 +01:00
launch_1.c
…
post_rules.mk
…
readme.md
…
rgb_matrix_kb.inc
…
rules.mk Migrate build target markers to keyboard.json - S (#23532) 2024-04-17 03:15:02 +01:00
usb_mux.c
…
usb_mux.h
…

readme.md

System76 Launch Configurable Keyboard (launch_1)

System76 Launch Configurable Keyboard

The Launch Configurable Keyboard is engineered to be comfortable, fully customizable, and make your workflow more efficient.

  • High-speed USB Hub
  • Works on Linux, Windows and macOS
  • 100% Open Source
  • Made in Colorado

Additional Launch Keyboard resources:

Building Firmware

To build the firmware using make (after setting up the build environment), e.g.:

make -r system76/launch_1:default

Equivalently, using the QMK CLI:

qmk compile -kb system76/launch_1 -km default

Flashing Firmware (DFU)

To build and flash the firmware on the keyboard, e.g.:

make -r system76/launch_1:default:flash

Equivalently, using the QMK CLI:

qmk flash -kb system76/launch_1 -km default

Flashing Firmware (ISP)

To flash the firmware (and/or bootloader) using ISP refer to the ISP Flashing Guide.

Factory fuse values => Low: 0x5E, High: 0x99, Extended: 0xF3, Lock Bits: 0xFF

Environment Setup

See the build environment setup and the make instructions for more information. If new to QMK, start with the Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard.
  • Keycode in layout: Press the key mapped to QK_BOOT in the second layer (Escape).
  • Electrical reset: Briefly short AVR ISP's GND (6) and RST (5) pads on the back of the PCB.