qmk_firmware/keyboards/treadstone48/keymaps/default/keymap.c

279 lines
10 KiB
C

#include QMK_KEYBOARD_H
#include "keymap_jp.h"
#include "../common/oled_helper.h"
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layer_number {
_BASE = 0,
_LOWER,
_RAISE,
_ADJUST,
};
enum custom_keycodes {
LOWER = SAFE_RANGE,
RAISE,
ADJUST,
KANJI,
RGBRST
};
enum tapdances{
TD_SCCL = 0,
TD_SLRO,
};
// Layer Mode aliases
#define _____ KC_TRNS
#define XXXXX KC_NO
#define KC_TBSF LSFT_T(KC_TAB)
// #define KC_SPSF LSFT_T(KC_SPC)
#define KC_ALAP LALT_T(KC_APP)
#define KC_JEQL LSFT(KC_MINS)
#define KC_SCCL TD(TD_SCCL)
#define KC_SLRO TD(TD_SLRO)
qk_tap_dance_action_t tap_dance_actions[] = {
[TD_SCCL] = ACTION_TAP_DANCE_DOUBLE(KC_SCLN, KC_QUOT),
[TD_SLRO] = ACTION_TAP_DANCE_DOUBLE(KC_SLSH, KC_RO),
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_base( \
//,--------------------------------------------------------------------------------------------------------------------.
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS,\
//|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------|
KC_TBSF, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCCL, KC_ENT,\
//|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLRO, KC_UP, \
//|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------|
KC_LCTRL, KC_LALT, KC_LGUI, LOWER, KC_BSPC, KC_SPC, RAISE, KC_ALAP, KC_LEFT, KC_DOWN, KC_RGHT,\
//`-------------------------------------------------------------------------------------------------------------------'
KC_DEL \
// ExtraKey: Split backspace key or it is below the enter key.
),
[_LOWER] = LAYOUT_base( \
//,--------------------------------------------------------------------------------------------------------------------.
_____, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,\
//|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------|
_____, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXX, XXXXX, XXXXX, KC_SCLN, KC_QUOT, _____,\
//|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------|
_____, KC_F11, KC_F12, XXXXX, KANJI, KC_ENT, XXXXX, XXXXX, KC_COMM, KC_DOT, KC_GRV, KC_PGUP, \
//|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------|
_____, _____, _____, _____, KC_DEL, _____, _____, XXXXX, KC_HOME, KC_PGDN, KC_END,\
//`-------------------------------------------------------------------------------------------------------------------'
XXXXX \
// ExtraKey: Split backspace key or it is below the enter key.
),
[_RAISE] = LAYOUT_base( \
//,--------------------------------------------------------------------------------------------------------------------.
_____, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXX,\
//|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------|
_____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_4, KC_5, KC_6, KC_QUOT, _____,\
//|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------|
_____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, KC_1, KC_2, KC_3, KC_RO, XXXXX, \
//|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------|
_____, _____, _____, _____, _____, _____, _____, KC_0, KC_DOT, KC_COMM, KC_SLSH,\
//`-------------------------------------------------------------------------------------------------------------------'
XXXXX \
// ExtraKey: Split backspace key or it is below the enter key.
),
[_ADJUST] = LAYOUT_base( \
//,--------------------------------------------------------------------------------------------------------------------.
XXXXX, RESET, RGBRST, AG_NORM, AG_SWAP, XXXXX, XXXXX, KC_WH_L, KC_WH_U, KC_HOME, KC_PGUP, XXXXX,\
//|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+-----------------|
XXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXX, XXXXX, KC_WH_R, KC_WH_D, KC_END, KC_PGDN, XXXXX,\
//|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------|
_____, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXX, XXXXX, XXXXX, KC_BTN1, KC_BTN2, XXXXX, KC_MS_U, \
//|--------+--------+--------+--------+--------+--------|--------+--------+--------+--------+--------+--------+--------|
_____, _____, _____, _____, XXXXX, XXXXX, _____, XXXXX, KC_MS_L, KC_MS_D, KC_MS_R,\
//`-------------------------------------------------------------------------------------------------------------------'
XXXXX \
// ExtraKey: Split backspace key or it is below the enter key.
)
};
#define L_BASE _BASE
#define L_LOWER (1<<_LOWER)
#define L_RAISE (1<<_RAISE)
#define L_ADJUST (1<<_ADJUST)
#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
#ifdef SSD1306OLED
typedef struct {
uint8_t state;
char name[8];
}LAYER_DISPLAY_NAME;
#define LAYER_DISPLAY_MAX 5
const LAYER_DISPLAY_NAME layer_display_name[LAYER_DISPLAY_MAX] = {
{L_BASE, "Base"},
{L_BASE + 1, "Base"},
{L_LOWER, "Lower"},
{L_RAISE, "Raise"},
{L_ADJUST_TRI, "Adjust"}
};
static inline const char* get_leyer_status(void) {
for (uint8_t i = 0; i < LAYER_DISPLAY_MAX; ++i) {
if (layer_state == 0 && layer_display_name[i].state == default_layer_state) {
return layer_display_name[i].name;
} else if (layer_state != 0 && layer_display_name[i].state == layer_state) {
return layer_display_name[i].name;
}
}
return "?";
}
static char layer_status_buf[24] = "Layer state ready.\n";
static inline void update_keymap_status(void) {
snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "OS:%s Layer:%s\n",
keymap_config.swap_lalt_lgui? "win" : "mac", get_leyer_status());
}
static inline void render_keymap_status(struct CharacterMatrix *matrix) {
matrix_write(matrix, layer_status_buf);
}
#define UPDATE_KEYMAP_STATUS() update_keymap_status()
#define RENDER_KEYMAP_STATUS(a) render_keymap_status(a)
#else
#define UPDATE_KEYMAP_STATUS()
#define RENDER_KEYMAP_STATUS(a)
#endif
static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) {
pressed ? layer_on(layer1) : layer_off(layer1);
IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3);
}
int RGB_current_mode;
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
UPDATE_KEY_STATUS(keycode, record);
bool result = false;
switch (keycode) {
case LOWER:
update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST);
break;
case RAISE:
update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST);
break;
case KANJI:
if (record->event.pressed) {
if (keymap_config.swap_lalt_lgui == false) {
register_code(KC_LANG2);
} else {
SEND_STRING(SS_LALT("`"));
}
} else {
unregister_code(KC_LANG2);
}
break;
#ifdef RGBLIGHT_ENABLE
case RGB_MOD:
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
break;
case RGBRST:
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
break;
#endif
default:
result = true;
break;
}
UPDATE_KEYMAP_STATUS();
return result;
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
void matrix_scan_user(void) {
iota_gfx_task(); // this is what updates the display continuously
}
static inline void matrix_update(struct CharacterMatrix *dest,
const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
static inline void render_status(struct CharacterMatrix *matrix) {
UPDATE_LED_STATUS();
RENDER_LED_STATUS(matrix);
RENDER_KEYMAP_STATUS(matrix);
UPDATE_LOCK_STATUS();
RENDER_LOCK_STATUS(matrix);
RENDER_KEY_STATUS(matrix);
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
#if DEBUG_TO_SCREEN
if (debug_enable) {
return;
}
#endif
matrix_clear(&matrix);
if (is_master) {
render_status(&matrix);
}
matrix_update(&display, &matrix);
}
#endif