qmk_firmware/drivers
Sergey Vlasov 459ccb681f
OLED driver fixes (#10377)
* Fix dirtying in oled_write_pixel()

Set the dirty bit for the block only if oled_write_pixel() actually
changed the buffer state.  Without this check oled_write_pixel() could
not be used inside the oled_task_user() code using the “redraw always”
style, because the blocks touched by oled_write_pixel() would always
appear dirty, and oled_render() would not proceed beyond the first such
dirty block.

* Fix oled_write_pixel() with 90/270 degree rotation

Use oled_rotation_width instead of OLED_DISPLAY_WIDTH, so that a rotated
display would be handled correctly.

* Fix compilation with custom OLED_BLOCK_COUNT and OLED_BLOCK_SIZE

Some OLED sizes (e.g., 64×48) may require a nonstandard value of
OLED_BLOCK_COUNT.  The documentation says that this value may be
redefined in config.h, but actually trying to redefine it caused a
compile error, because the macro was redefined in oled_driver.c.
Make the OLED_BLOCK_COUNT definition in oled_driver.c respect any
user override, and do the same for OLED_BLOCK_SIZE just in case.

* Fix handling of out-of-range bits in oled_dirty

If a custom OLED_BLOCK_COUNT value is specified, some bits in oled_dirty
may not correspond to existing blocks; however, if those bits are set
somewhere (e.g., by code with sets oled_dirty to ~0 or even -1),
oled_render() would try to handle them and could access memory beyond
oled_buffer and perform hardware operations with out of range values.
Prevent this by masking off unused bits in oled_render(), and also avoid
setting those bits in other functions.

* Fix potentially wrong dirtying in oled_write_char()

oled_write_char() tried to mark the position just beyond the written
character as dirty; use (OLED_FONT_WIDTH - 1) to dirty the last position
still belonging to the character instead.

* Fix `#define OLED_BLOCK_TYPE uint32_t` on AVR

Using uint32_t as OLED_BLOCK_TYPE did not work properly on AVR, because
some bit shifts were performed using 16-bit int.  Add explicit casts to
OLED_BLOCK_TYPE to those shifts.
2020-10-04 05:44:19 +11:00
..
avr Fix ssd1306 compilation on avr-gcc 10 (#9267) 2020-09-17 10:42:24 +10:00
chibios Fix DMA stream ID calculation in ws2812_pwm (#10008) 2020-08-29 14:30:02 -07:00
eeprom
gpio
haptic
issi IS31FL3741 driver fixup (#10519) 2020-10-04 05:15:44 +11:00
oled OLED driver fixes (#10377) 2020-10-04 05:44:19 +11:00
qwiic
ugfx/gdisp
ws2812.h