g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/handwired/meck_tkl
History
Ryan 8bb4cba7b0
Move TKL layouts to data driven (#20337) 		2023-04-05 15:53:45 +10:00
..
blackpill_f401 Move matrix config to info.json, part 6 (#20019) 2023-03-11 00:32:05 +11:00
keymaps/default
…
config.h Move matrix config to info.json, part 6 (#20019) 2023-03-11 00:32:05 +11:00
info.json Move TKL layouts to data driven (#20337) 2023-04-05 15:53:45 +10:00
readme.md
…
rules.mk
…

readme.md

meck_tkl

meck_tkl

A standard tenkeyless keyboard, using STM32 Blackpill.

Make example for this keyboard (after setting up your build environment):

make handwired/meck_tkl:default

Flashing example for this keyboard:

make handwired/meck_tkl:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

Wiring instructions

  • On Blackpill boards, avoid using the following pins, since they will cause either USB enumeration or the DFU bootloader to not work correctly:
    • USB-related pins: PA10, PA11, PA12
    • BOOT1 pin: PB2

Sample wiring:

wiring