qmk_firmware/keyboards/dumbpad
Joel Challis 6e3cc56bdf
Migrate RGB Matrix config to info.json - D (#22811)
2024-01-07 13:36:14 +00:00
..
v0x
v0x_dualencoder
v0x_right
v1x Remove obvious user keymaps, `keyboards/{d,e,f}*` edition. (#22695) 2023-12-18 21:45:52 +11:00
v1x_dualencoder
v1x_oled fix: improper usage of keyboard/user-level functions (#22652) 2023-12-13 18:33:15 +00:00
v1x_right
v3x Migrate RGB Matrix config to info.json - D (#22811) 2024-01-07 13:36:14 +00:00
info.json
readme.md
rules.mk

readme.md

dumbpad

dumbpad

dumbpad is a num/macro pad available in two major form factors - single- and dual-rotary encoder.

  • Single-encoder PCBs are reversible - components can be soldered to either side to allow the encoder to be on either the left or right side.
  • Dual-encoder PCBs come in two versions - one with the encoders in the bottom corners, the otherin the top corners

Support for dumbpad all PCB revisions can be found in this directory.

  • Maintainer: imchipwood
  • PCB repository: dumbpad on github
    • PCB revisions:
      • v0.x - these revisions have two LEDs for layer indication
        • 'v0x': Default setup for single rotary encoder v0.x PCBs
        • 'v0x_right': Same as v0x but with rotary encoder on right side (components on bottom of PCB)
        • 'v0x_dualencoder': Dual-encoder PCBs
      • v1.x - these revisions have three LEDs - two for layer indication, one for numlock indication
        • 'v1x': Default setup for v1.x PCBs with a single rotary encoder on the left side
        • 'v1x_right': Same as v1x but with rotary encoder on right side (components on bottom of PCB)
        • 'v1x_dualencoder': v1x PCB with two rotary encoders