g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/darkproject/kd83a_bfg_edition
History
Ryan 65a04ead32
LED drivers: update keyboard LED configs (#23073) 
* IS31FL3733: update keyboard LED config

* IS31FL3736: update keyboard LED config

* IS31FL3737: update keyboard LED config

* IS31FL3741: update keyboard LED config

* IS31FL3743A: update keyboard LED config

* AW20216S: update keyboard LED config

* SNLED27351: update keyboard LED config
 		2024-02-25 21:29:37 +00:00
..
keymaps
…
config.h AW20216S: combine EN pin defines (#23067) 2024-02-15 07:05:08 +00:00
halconf.h
…
info.json Migrate WEAR_LEVELING_* to info.json (#23077) 2024-02-14 08:54:24 +00:00
kd83a_bfg_edition.c LED drivers: update keyboard LED configs (#23073) 2024-02-25 21:29:37 +00:00
kd83a_bfg_edition.h
…
mcuconf.h
…
readme.md
…
rules.mk Migrate WEAR_LEVELING_* to info.json (#23077) 2024-02-14 08:54:24 +00:00

readme.md

kd83a_bfg_edition

KD83A_BFG_EDITION KD83A_BFG_EDITION

An 83 keys keyboard, Equipped with the WestBerry Q95 microcontroller.

  • Keyboard Maintainer: GSKY
  • Hardware Supported: KD83A_BFG_Edition
  • Hardware Availability: GSKY GitHub

Make example for this keyboard (after setting up your build environment):

make darkproject/kd83a_bfg_edition:default

Flashing example for this keyboard:

make darkproject/kd83a_bfg_edition:default:flash

To reset the board into bootloader mode, do one of the following:

  • Hold the Reset switch mounted on the surface of the PCB back side after the USB cable is connected
  • Hold the Escape key while connecting the USB cable (also erases persistent settings)
  • Fn+ESC will reset the board to bootloader mode

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.