qmk_firmware/keyboards/vinta
Nick Brassel 4d06d2835c Move CORTEX_ENABLE_WFI_IDLE=TRUE to rules.mk files. 2020-01-28 23:45:42 +11:00
..
boards/GENERIC_STM32_F042X6
keymaps/default Update Vinta (#4705) 2018-12-21 18:39:25 -08:00
bootloader_defs.h
chconf.h Move CORTEX_ENABLE_WFI_IDLE=TRUE to rules.mk files. 2020-01-28 23:45:42 +11:00
config.h Remove CUSTOM_MATRIX option from diode direction (#5090) 2019-02-18 08:49:51 -08:00
halconf.h
info.json 65 ansi blocker everywhere (everywhere I can find) (#6805) 2019-09-25 12:55:27 -07:00
mcuconf.h
readme.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
rules.mk Move CORTEX_ENABLE_WFI_IDLE=TRUE to rules.mk files. 2020-01-28 23:45:42 +11:00
vinta.c
vinta.h 65 ansi blocker everywhere (everywhere I can find) (#6805) 2019-09-25 12:55:27 -07:00

readme.md

Vinta

Vinta

This is an ARM-powered 65% keyboard PCB with USB Mini B connector and breakout for optional RGB underglow.

Keyboard Maintainer: Peioris and on github
Hardware Supported: Vinta with STM32F042K6T6
Hardware Availability: Private Groupbuy (will post on Reddit once QMK has RGB underglow working)

Make example for this keyboard (after setting up your build environment):

make vinta:default

See build environment setup then the make instructions for more information.

Developer's Note

STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a RESET keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a RESET keycode).