feb5e4aaeb
* add change_reciver2sender()/change_sender2reciver()
This is a change to improve readability.
* txled, rxled off in matrix_init()
* add serial_send_packet() / serial_recive_packet()
This is a change to reduce object size.
* add serial_low() at ISR() top
* add __attribute__((always_inline)) to some functions
* modify serial_send_packet()/serial_recive_packet()
A little, object size reduction.
A little, speedup.
* add debug code to helix/serial.c
* Adjust sampling timing of serial signal being received
* add split_scomm.c/split_scomm.h and change serial.c/serial.h
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
* add split_scomm.c/split_scomm.h into helix/rev1
* reduce object size helix/rev2/matrix.c
* remove checksum check, add parity check
* force occur parity error for test
* parity test ok. remove test code
* change some comment & add skip code when buffer_size == 0
* serial.c: multiple types of transaction support
Add 4 bits transaction-type field at packet top.
Select Transaction Descriptor Table entry by transaction-type.
* helix serial master-slave transaction optimize
Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized.
* add debug code for retry
* add comment into each config.h
* fix ISR status drop
* add a debug macro 'debug_retry_chg()'
* reduce led_test size
* remove debug code from helix/serial.c and etc.
* helix:five_rows change TAPPING_TERM value 140
* Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement.
- The difference with the original let's split's serial.c
- It's high-speed about 4 times.
- Stable bi-directional data transfer. (Helix need master to slave transfer)
- serial.h was divided 2 files, serial_config.h and sereial.h
- With multiple types of transaction support, communication contents can be optimized. (NEW flexible API)
- USE OLD Simple APIs (compatible with let's split serial.c)
- files :
- serial_config.h -- hardware configuration (need include by config.h)
- serial.c/serial.h -- serial communication
- USE NEW flexible APIs. (Support multi-type transaction function.)
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
- files
- split_scomm.c -- communication buffer is defined in here. call by matrix.c.
- split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c
- serial_config.h -- hardware configuration (need include by config.h)
To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION
- serial.c/serial.h -- serial communication lower layer
- NEW APIs for serial.c / serial.h (The lower layer)
// Soft Serial Transaction Descriptor
typedef struct _SSTD_t {
uint8_t *status;
uint8_t initiator2target_buffer_size;
uint8_t *initiator2target_buffer;
uint8_t target2initiator_buffer_size;
uint8_t *target2initiator_buffer;
} SSTD_t;
// initiator is transaction start side
void soft_serial_initiator_init(SSTD_t *sstd_table);
// target is interrupt accept side
void soft_serial_target_init(SSTD_t *sstd_table);
int soft_serial_transaction(int sstd_index);
int soft_serial_get_and_clean_target_status(int sstd_index);
- NEW APIs for split_scomm.c / split_scomm.h (The upper layer)
move from old serial.c the following buffer and functions
serial_slave_buffer[]
serial_master_buffer[]
void serial_master_init(void)
void serial_slave_init(void)
int serial_update_buffers(void)
define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h
|
||
|---|---|---|
| .. | ||
| README.md | ||
| README_jp.md | ||
| config.h | ||
| keymap.c | ||
| rules.mk | ||
README.md
Keymap for 5 rows Helix keyboard
This keymap is only for 5 rows Helix keyboard.
Layout
Layer
| Priority | Number | Name | Discription |
|---|---|---|---|
| high | 9 | Adjust | keyboard local functions (violet) |
| 8 | KFunction | TenkeyPad function keys (bule) | |
| 7 | Extra char | some charactors (red) | |
| 6 | Function | function keys (blue) | |
| 2 | Keypad | TenkeyPad | |
| 2 | Dvorak | Dvorak | |
| 1 | Colemak | Colemak | |
| low | 0 | Qwerty | QWERTY (base) |
Adjust Layer
Adjust Layer has keyboard local function keys.
- LED control.
- Mac/Win mode change.
- Qwerty/Colemak/Dvorak/TenkeyPad change.
Mac mode and Win mode
Mac mode swap Alt/Win(GUI) key.
| mode | key | code |
|---|---|---|
| Mac mode | Adjust + g(Qwerty) | AG_NORM |
| Adjust + h(Qwerty) | ||
| Win mode | Adjust + t(Qwerty) | AG_SWAP |
| Adjust + y(Qwerty) |
LED control
| command | key | code |
|---|---|---|
| on/off | Adjust + e(Qwerty) | RGB_TOG |
| Adjust + i(Qwerty) | ||
| change mode | Adjust + d(Qwerty) | RGB_SMOD |
| Adjust + k(Qwerty) | ||
| HUE + | Adjust + Left Control | RGB_HUI |
| Adjust + Right Control | ||
| HUE - | Adjust + Left Shift | RGB_HUD |
| Adjust + Right Shift | ||
| SAT + | Adjust + ;(Qwerty) | RGB_SAI |
| Adjust + a(Qwerty) | ||
| SAT - | Adjust + z(Qwerty) | RGB_SAD |
| Adjust + /(Qwerty) | ||
| Bright + | Adjust + s(Qwerty) | RGB_VAI |
| Adjust + l(Qwerty) | ||
| Bright - | Adjust + x(Qwerty) | RGB_VAD |
| Adjust + >(Qwerty) | ||
| reset | Adjust + w | RGBRST |
Qwerty, Colemak, Dvorak, TenkeyPad selection
| char layout | key |
|---|---|
| Qwerty | Adjust + 5 |
| Adjust + 6 | |
| Calemak | Adjust + 4 |
| Adjust + 7 | |
| Dvorak | Adjust + 3 |
| Adjust + 8 | |
| Keypad | Adjust + 2 |
| Adjust + 9 |
TenkeyPad layout
Note
