g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/cablecardesigns/cypher/rev6
History
Ryan 47966dc2a6
Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 		2023-04-06 18:00:54 +10:00
..
keymaps Reworked backlight keycodes. (#18961) 2022-11-06 08:11:59 +11:00
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
info.json Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rev6.h [Keyboard] add cypher rev6 (#14647) 2022-01-28 23:10:41 -08:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

cypher rev6

PCB for the cypher keyboard, this is rev6 of this PCB

  • Keyboard Maintainer: westfoxtrot
  • Hardware Supported: Cypher PCB revisions 6 (Rev # is printed on PCB)
  • Hardware Availability: with keyboard release + Files released here

Make example for this keyboard (after setting up your build environment):

make cablecardesigns/cypher/rev6:default

Flashing example for this keyboard:

make cablecardesigns/cypher/rev6:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: There are 2 holes underneath the spacebar position that if shorted will enter bootloader
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available