4d9b11af14
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4 * Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions * Update docs to use get_mods() instead of keyboard_report->mods * Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist * Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt) |
||
|---|---|---|
| .. | ||
| keymaps | ||
| config.h | ||
| dactyl.c | ||
| dactyl.h | ||
| i2cmaster.h | ||
| info.json | ||
| matrix.c | ||
| readme.md | ||
| rules.mk | ||
| twimaster.c | ||
readme.md
Dactyl
See https://github.com/adereth/dactyl-keyboard
The Dactyl uses the Teensy Loader.
Linux users need to modify udev rules as described on the Teensy
Linux page. Some distributions provide a binary, maybe called
teensy-loader-cli.
To flash the firmware:
-
Build the firmware with
make handwired/dactyl:<keymapname>, for examplemake handwired/dactyl:default -
This will result in a hex file called
handwired_dactyl_<keymapname>.hex, e.g.handwired_dactyl_default.hex -
Start the teensy loader.
-
Load the .hex file into it.
-
Put the Teensy in firmware-loading mode:
- If your current layout has a RESET key, press it.
- If you lack a RESET key, press the reset button on the Teensy board itself.
-
Click the button in the Teensy app to download the firmware.
To flash with ´teensy-loader-cli´:
-
Build the firmware as above
-
Run
<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w handwired_dactyl_<keymapname>.hex -
If you like, you can do both at once:
make handwired/dactyl:<keymapname>:teensy -
Put the Teensy in firmware-loading mode:
- If your current layout has a RESET key, press it.
- If you lack a RESET key, press the reset button on the Teensy board itself.