qmk_firmware/keyboards/sixkeyboard
Drashna Jaelre b05c0e46c6 Adds a default value for IS_COMMAND for COMMAND feature (#4301)
* Add default value for IS_COMMAND for COMMAND feature

* Cleanup and consistency

* Update Templates to reflect change

* Fix IS_COMMAND in template

* Fix IS_COMMAND define

* Use consistent IS_COMMAND block in templates

* Remove unnecessary `#undef IS_COMMAND` directives

* Fix compile issue on orthodox

* Reomve IS_COMMAND option for newer boards

* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting

* Remove a couple of additional IS_COMMAND defines

* Remove remaining redundant IS_COMMAND definitions

* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin

* Remove multiple empty lines in modified config.h files

* Update additional boards

* Reomve IS_COMMAND from newer boards

* Update Alice keyboard

* Remove IS_COMMAND from additional boards

Jan 24th edition
2019-01-26 15:49:45 -08:00
..
keymaps/default Remove empty fn_actions[] 2019-01-11 18:32:43 -08:00
config.h Adds a default value for IS_COMMAND for COMMAND feature (#4301) 2019-01-26 15:49:45 -08:00
info.json
matrix.c
readme.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
rules.mk
sixkeyboard.c
sixkeyboard.h

readme.md

Techkeys SixKeyBoard

Keyboard Maintainer: QMK Community
Hardware Supported: Techkeys SixKeyBoard PCB
Hardware Availability: Techkeys

Make example for this keyboard (after setting up your build environment):

make sixkeyboard:default

See build environment setup then the make instructions for more information.

Hardware Info

The schematic is like this:

 switches       leds
,--+--+--.   ,--+--+--.
|C7|B7|B5|   |C6|B6|B4|
+--+--+--+   +--+--+--+
|D6|D1|D4|   |D5|D2|D3|
`--+--+--'   `--+--+--'

The LED on the bottom is C4. All 7 of the leds are turned on when the keyboard boots-up in the sixkeyboard.c file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit.

There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object.