g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/0xcb/tutelpad
History
Ryan 363bfdbfda
Move `RGBLIGHT_LIMIT_VAL` to data driven (#20974) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
 		2023-05-27 12:27:44 +10:00
..
keymaps
…
config.h Move `RGBLIGHT_LIMIT_VAL` to data driven (#20974) 2023-05-27 12:27:44 +10:00
info.json Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
readme.md
…
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00
tutelpad.c Move layouts for direct_pins boards to data driven (#19872) 2023-02-19 18:55:12 +11:00

readme.md

TutelPad macropad

Bootloader

You can enter the bootloader by pressing the reset switch on the side while the keyboard is plugged in. You can also short the GND and RST pads on the controller.

Make example for this keyboard (after setting up your build environment):

make 0xcb/tutelpad:default

Flashing example for this keyboard:

make 0xcb/tutelpad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.