g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/dztech/dz65rgb
History
Joel Challis e04f6c5d38
Remove manual enable of LTO within user keymaps (#15378) 		2022-02-10 09:52:39 -08:00
..
keymaps Remove manual enable of LTO within user keymaps (#15378) 2022-02-10 09:52:39 -08:00
v1 Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00
v2 Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00
v3 Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00
config.h [Keyboard] add dztech/dz65rgb/v3 keyboard (#13017) 2021-06-18 17:54:29 -07:00
dz65rgb.c [Keyboard] add dztech/dz65rgb/v3 keyboard (#13017) 2021-06-18 17:54:29 -07:00
dz65rgb.h [Keyboard] add dztech/dz65rgb/v3 keyboard (#13017) 2021-06-18 17:54:29 -07:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md [Keyboard] add dztech/dz65rgb/v3 keyboard (#13017) 2021-06-18 17:54:29 -07:00

readme.md

DZ65RGB

A customizable 65% RGB keyboard.

  • Keyboard Maintainer: moyi4681
  • Hardware Supported: DZ65RGB V1,V2 and V3
  • Hardware Availability: KBDfans

There are three versions of the DZ65RGB. Please use the appropriate firmware for your board.

  • V1: STM32F303 (Arm), takes .bin files
  • V2: ATmega32U4 (AVR), takes .hex files, is31fl3731 rgbmatrix driver
  • V3: ATmega32U4 (AVR), takes .bin files, is31fl3741 rgbmatrix driver

Bootloader mode

To put in bootloader mode, hold the Esc key while plugging in the USB cable. or use reset key behind the pcb.

Making firmware

Make example for this keyboard (after setting up your build environment):

make dztech/dz65rgb/v1:default # Arm (STM32F303)
make dztech/dz65rgb/v2:default # AVR (ATmega32U4)
make dztech/dz65rgb/v3:default # AVR (ATmega32U4)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.