qmk_firmware/keyboards/coarse/vinta
Ryan 4791cfae1a
Remove width, height and key_count from info.json (#14274)
2021-09-12 14:04:56 +10:00
..
keymaps/default Remove empty override functions (#14312) 2021-09-05 21:36:31 +01:00
chconf.h Rework as per 9824 (#13898) 2021-08-06 08:14:43 +10:00
config.h Rework as per 9824 (#13898) 2021-08-06 08:14:43 +10:00
halconf.h Rework as per 9824 (#13898) 2021-08-06 08:14:43 +10:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md Rework as per 9824 (#13898) 2021-08-06 08:14:43 +10:00
rules.mk Remove Full Bootmagic (#13846) 2021-08-06 23:59:56 -07:00
vinta.c Remove empty override functions (#14312) 2021-09-05 21:36:31 +01:00
vinta.h Rework as per 9824 (#13898) 2021-08-06 08:14:43 +10:00

readme.md

Vinta

Vinta

This is an ARM-powered 65% keyboard PCB with USB Mini B connector and breakout for optional RGB underglow.

Keyboard Maintainer: Coarse
Hardware Supported: Vinta with STM32F042K6T6
Hardware Availability: Private Groupbuy

Make example for this keyboard (after setting up your build environment):

make coarse/vinta:default

See build environment setup then the make instructions for more information.

Developer's Note

STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a RESET keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a RESET keycode).