qmk_firmware/keyboards/matrix/m12og/rev1
Nick Brassel 092228571c
Move EFL wear-leveling driver to be default for F1, F3, F4, L4, G4, WB32, GD32V. (#19020)
2022-11-11 23:57:44 +00:00
..
boards/m12og_v1
keymaps/default Remove rgblight_list.h (#18878) 2022-10-27 23:50:14 +01:00
ld
chconf.h
config.h Remove RGBLIGHT_ANIMATION and clean up effect defines for L-Q (#18727) 2022-10-15 09:55:40 -07:00
halconf.h
info.json
matrix.c
mcuconf.h
readme.md
rev1.c
rev1.h
rules.mk Move EFL wear-leveling driver to be default for F1, F3, F4, L4, G4, WB32, GD32V. (#19020) 2022-11-11 23:57:44 +00:00

readme.md

Matrix 8XV1.2 OG keyboard

Matrix 8XV1.2 OG

This was the Matrix 8XV1.2 OG keyboard made by the Matrix team.
Note: This firmware only supports ANSI only version (green/yellow PCB), and DOES NOT support the 8XV1.2 OG ISO/ANSI version.

  • Keyboard Maintainer: kb-elmo
  • Hardware Supported: Matrix 8XV1.2 OG ANSI only PCB
  • Hardware Availability: Matrix Lab

Make example for this keyboard (after setting up your build environment):

make matrix/m12og/rev1:default

Bootloader:

Hold down ESC while plugging in the keyboard. The board will show up as a mass storage device on your computer. Drag and drop the compiled firmware .bin file into it. The board will automatically reset and load the new firmware.

DO NOT DO THIS ON A MAC OS SYSTEM! IT WILL PERMANENTLY BRICK THE KEYBOARD!!!


See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.