History

Ryan 5fda349018 Remove RGB keycodes from boards with no RGB config (#23709 )		2024-05-20 17:11:49 +10:00
..
keymaps	Adjust keycode alignment around `QK_BOOT` (#23697 )	2024-05-11 16:50:48 +01:00
rev1	Remove RGB keycodes from boards with no RGB config (#23709 )	2024-05-20 17:11:49 +10:00
readme.md	…
rules.mk	…

readme.md

Mün

Mün is powered by STM32 with full QMK support. Each key has super-bright RGB backlighting and MX Kailh hotswap sockets. No soldering is required to get a fully functioning keyboard. There are an additional 14 rear-facing RGB LEDs on each side. Each half can be configured to run as master or slave with the two USB-C ports. They also support up to two rotary encoders and one OLED panel per half.

Keyboard Maintainer: Legonut
Hardware Supported: Mün PCB R1.0, R1.1, R1.2 Hardware Availability: RGBKB

Make example for this keyboard (after setting up your build environment):

make rgbkb/mun:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.