History

Ryan 1184e0d9be Adjust keycode alignment around `QK_BOOT` (#23697 )		2024-05-11 16:50:48 +01:00
..
keymaps	Adjust keycode alignment around `QK_BOOT` (#23697 )	2024-05-11 16:50:48 +01:00
ktr1010	Migrate build target markers to keyboard.json (#23293 )	2024-03-30 11:31:50 +00:00
ws2812	Migrate build target markers to keyboard.json (#23293 )	2024-03-30 11:31:50 +00:00
chconf.h	…
config.h	Simplify more feature driver defines (#22090 )	2023-09-25 13:06:42 +10:00
halconf.h	…
info.json	Migrate features and LTO from rules.mk to data driven (#23307 )	2024-03-30 10:57:30 +00:00
mcuconf.h	…
meridian.c	Update GPIO API usage in keyboard code (#23361 )	2024-05-03 15:21:29 +10:00
readme.md	…
rules.mk	Migrate features and LTO from rules.mk to data driven (#23307 )	2024-03-30 10:57:30 +00:00

readme.md

ai03 x PrimeKB Meridian

Keyboard Maintainer: Holten Campbell
Hardware Supported: STM32F072CBT6

Compiling firmware and flashing

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

Bootmagic reset: hold down the key at (0,0) in the matrix (usually Escape) and plug in the keyboard; or
Physical reset button: press the button on the bottom of the PCB; or
Keycode in layout: press the key mapped to QK_BOOT if it is available (Escape key on layer 1 in the default layout).

Compile firmware

The Meridian PCB was delivered in two variants, equal in design but using different RGB LED models: one using WS2812 and another using KTR1010 LEDs. Both can be compiled using

make primekb/meridian/ws1812:default
make primekb/meridian/ktr1010:default

After compiling, enter bootloader in the PCB and flash the firmware using dfu-util or QMK Toolbox. For direct compile-and-flashing, put the PCB in DFU state and use

make primekb/meridian/ws1812:default:flash
make primekb/meridian/ktr1010:default:flash

VIA-supported firmwares are also available.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.