qmk_firmware/keyboards/studiokestra/cascade
James Young 0094a6f571
Migrate `LOCKING_*_ENABLE` to Data-Driven: S, Part 2 (#23784)
Affects:

  - `slz40`
  - `smithrune/iron160/iron160_s`
  - `smithrune/iron165r2/f072`
  - `smithrune/iron165r2/f411`
  - `smithrune/iron180`
  - `smithrune/iron180v2/v2h`
  - `smithrune/iron180v2/v2s`
  - `smoll/lefty`
  - `snampad`
  - `sneakbox/aliceclone`
  - `sneakbox/disarray/ortho`
  - `sneakbox/disarray/staggered`
  - `soup10`
  - `soy20`
  - `sparrow62`
  - `split67`
  - `splitish`
  - `splitography`
  - `star75`
  - `stello65/beta`
  - `stello65/hs_rev1`
  - `stello65/sl_rev1`
  - `stenokeyboards/the_uni/pro_micro`
  - `stenokeyboards/the_uni/usb_c`
  - `strech/soulstone`
  - `studiokestra/bourgeau`
  - `studiokestra/cascade`
  - `studiokestra/frl84`
  - `studiokestra/galatea/rev1`
  - `studiokestra/galatea/rev2`
  - `studiokestra/galatea/rev3`
  - `studiokestra/line_friends_tkl`
  - `studiokestra/nascent`
  - `studiokestra/nue`
  - `suavity/ehan`
  - `subatomic`
  - `switchplate/southpaw_65`
  - `switchplate/southpaw_fullsize`
  - `switchplate/switchplate910`
  - `sx60`
  - `system76/launch_1`
2024-05-23 20:34:56 +01:00
..
keymaps
keyboard.json Migrate `LOCKING_*_ENABLE` to Data-Driven: S, Part 2 (#23784) 2024-05-23 20:34:56 +01:00
readme.md

readme.md

Cascade

60% universal hotswap/solder PCB with USB-C that supports multiple commonly used layouts.

Bootload Sequence

There are 3 ways to put the board in bootloader mode:

  • Hold the top-left key (typically Esc) while plugging in the USB cable, OR
  • While the PCB is plugged into the PC, press the physical RESET button on the back of the board, OR
  • With the default layout, toggle Layer 1 and press the ESC key.

Compiling Firmware

Make example for this keyboard (after setting up your build environment):

make studiokestra/cascade:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.