qmk_firmware/keyboards/mxss
James Young 495e83b30f
Migrate `LOCKING_*_ENABLE` to Data-Driven: M, Part 2 (#23773)
Affects:

  - `mkh_studio/bully`
  - `mlego/m48/rev1`
  - `mlego/m60/rev1`
  - `mlego/m60_split/rev1`
  - `mlego/m60_split/rev2`
  - `mntre`
  - `mode/m65ha_alpha`
  - `mode/m65hi_alpha`
  - `mode/m65s`
  - `mode/m80v1/m80h`
  - `mode/m80v1/m80s`
  - `mode/m80v2/m80v2h`
  - `mode/m80v2/m80v2s`
  - `molecule`
  - `momoka_ergo`
  - `monarch`
  - `monsgeek/m1`
  - `monsgeek/m3`
  - `monsgeek/m5`
  - `monsgeek/m6`
  - `monstargear/xo87/rgb`
  - `monstargear/xo87/solderable`
  - `montsinger/rebound/rev1`
  - `montsinger/rebound/rev2`
  - `montsinger/rebound/rev3`
  - `montsinger/rebound/rev4`
  - `montsinger/rewind`
  - `moon`
  - `morizon`
  - `mountainblocks/mb17`
  - `mt/blocked65`
  - `mt/mt64rgb`
  - `mt/mt980`
  - `mtbkeys/mtb60/hotswap`
  - `mtbkeys/mtb60/solder`
  - `murcielago/rev1`
  - `mxss`
  - `mysticworks/wyvern`
2024-05-22 11:13:39 +01:00
..
keymaps Remove duplicated rgblight implementation from mxss (#22122) 2023-09-25 13:04:38 +10:00
keyboard.json Migrate `LOCKING_*_ENABLE` to Data-Driven: M, Part 2 (#23773) 2024-05-22 11:13:39 +01:00
readme.md Remove duplicated rgblight implementation from mxss (#22122) 2023-09-25 13:04:38 +10:00

readme.md

MxSS - Polycarb 65% Kit for MX/SMK

MxSS - Polycarb 65% Kit for MX/SMK

Information:

  • Case: Frosted Polycarbonate, CNC milled
  • Plate: Brass, mirror-finished and electroplated
  • Weight: Same as plate
  • PCB: Custom designed for the MxSS by kawasaki161, White solder mask and ENIG finish

Details:

  • 2.9 degrees angle on the case
  • Top mount plate
  • Center USB, Type-B Mini
  • MX and SMK (White and Orange) switch support
  • Holtite support
  • RGB underglow
  • 1.5kg with plate and weight

Make example for this keyboard (after setting up your build environment):

make mxss:default

Flashing example for this keyboard:

make mxss:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 2 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available