qmk_firmware/keyboards/matrix/noah/noah.c

229 lines
6.4 KiB
C

/**
* noah.c
*/
#include "quantum.h"
void bootloader_jump(void) {
// This board doesn't use the standard DFU bootloader, and no information is available regarding how to enter bootloader mode. All we can do here is reset.
NVIC_SystemReset();
}
#ifdef RGBLIGHT_ENABLE
#include <string.h>
#include "rgblight.h"
#include "ws2812.h"
extern rgblight_config_t rgblight_config;
// led 0 for caps lock, led 1 for scroll lock, led 3 for num lock
// led 4 for layer 1, led 5 for layer 2, led 6 for layer 3, led 7 for layer 4
#if RGBLIGHT_LED_COUNT < 7
#error "MUST set the RGBLIGHT_LED_COUNT bigger than 7"
#endif
rgb_led_t noah_leds[RGBLIGHT_LED_COUNT];
static bool noah_led_mode = false;
void setleds_custom(rgb_led_t *ledarray, uint16_t num_leds) {
memset(&noah_leds[0], 0, sizeof(noah_leds));
if (!rgblight_config.enable) {
for (uint8_t i = 0; i < RGBLIGHT_LED_COUNT; i++) {
ledarray[i].r = 0;
ledarray[i].g = 0;
ledarray[i].b = 0;
}
}
if (noah_led_mode) {
led_t led_state = host_keyboard_led_state();
if (led_state.caps_lock) {
noah_leds[0] = ledarray[0];
}
if (led_state.scroll_lock) {
noah_leds[1] = ledarray[1];
}
if (led_state.num_lock) {
noah_leds[2] = ledarray[2];
}
for (int32_t i = 0; i < 4; i++) {
if(layer_state_is(i+1)) {
noah_leds[i + 3] = ledarray[i + 3];
}
}
} else {
memcpy(&noah_leds[0], &ledarray[0], sizeof(noah_leds));
}
ws2812_setleds(noah_leds, RGBLIGHT_LED_COUNT);
}
const rgblight_driver_t rgblight_driver = {
.init = ws2812_init,
.setleds = setleds_custom,
};
#endif
#ifdef RGB_MATRIX_ENABLE
const is31fl3731_led_t PROGMEM g_is31fl3731_leds[IS31FL3731_LED_COUNT] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
* | | G location
* | | | B location
* | | | | */
// left CB
{0, C1_9, C3_10, C4_10},
{0, C1_10, C2_10, C4_11},
{0, C1_11, C2_11, C3_11},
{0, C1_12, C2_12, C3_12},
{0, C1_13, C2_13, C3_13},
{0, C1_14, C2_14, C3_14},
{0, C1_15, C2_15, C3_15},
{0, C1_16, C2_16, C3_16},
{0, C5_9, C4_9, C6_9},
{0, C5_16, C4_16, C6_16},
{0, C9_9, C8_9, C7_9},
{0, C9_10, C8_10, C7_10},
{0, C9_11, C8_11, C7_11},
{0, C9_12, C8_12, C7_12},
{0, C9_13, C8_13, C7_13},
{0, C9_14, C8_14, C7_14},
{0, C9_15, C8_15, C6_14},
{0, C9_16, C7_15, C6_15},
// left CA
{0, C1_1, C3_2, C4_2},
{0, C1_2, C2_2, C4_3},
{0, C1_3, C2_3, C3_3},
{0, C1_4, C2_4, C3_4},
{0, C1_5, C2_5, C3_5},
{0, C1_6, C2_6, C3_6},
{0, C1_7, C2_7, C3_7},
{0, C1_8, C2_8, C3_8},
{0, C5_1, C4_1, C6_1},
{0, C5_8, C4_8, C6_8},
{0, C9_1, C8_1, C7_1},
{0, C9_2, C8_2, C7_2},
{0, C9_3, C8_3, C7_3},
{0, C9_4, C8_4, C7_4},
{0, C9_5, C8_5, C7_5},
{0, C9_6, C8_6, C7_6},
{0, C9_7, C8_7, C6_6},
{0, C9_8, C7_7, C6_7},
// right CA
{1, C1_1, C3_2, C4_2},
{1, C1_2, C2_2, C4_3},
{1, C1_3, C2_3, C3_3},
{1, C1_4, C2_4, C3_4},
{1, C1_5, C2_5, C3_5},
{1, C1_6, C2_6, C3_6},
{1, C1_7, C2_7, C3_7},
{1, C1_8, C2_8, C3_8},
{1, C5_1, C4_1, C6_1},
{1, C5_8, C4_8, C6_8},
{1, C9_1, C8_1, C7_1},
{1, C9_2, C8_2, C7_2},
{1, C9_3, C8_3, C7_3},
{1, C9_4, C8_4, C7_4},
{1, C9_5, C8_5, C7_5},
{1, C9_6, C8_6, C7_6},
{1, C9_7, C8_7, C6_6},
{1, C9_8, C7_7, C6_7},
// right CB
{1, C1_9, C3_10, C4_10},
{1, C1_10, C2_10, C4_11},
{1, C1_11, C2_11, C3_11},
{1, C1_12, C2_12, C3_12},
{1, C1_13, C2_13, C3_13},
{1, C1_14, C2_14, C3_14},
{1, C1_15, C2_15, C3_15},
{1, C1_16, C2_16, C3_16},
{1, C5_9, C4_9, C6_9},
{1, C5_16, C4_16, C6_16},
{1, C9_9, C8_9, C7_9},
{1, C9_10, C8_10, C7_10},
{1, C9_11, C8_11, C7_11},
{1, C9_12, C8_12, C7_12},
{1, C9_13, C8_13, C7_13},
{1, C9_14, C8_14, C7_14},
{1, C9_15, C8_15, C6_14},
{1, C9_16, C7_15, C6_15},
};
led_config_t g_led_config = {
{
{ 1, 2, 3, 4, 5, 6, 7, 36, 37, 38, 39, 40, NO_LED, 41},
{ 0, 8, 10, 11, 12, 13, 14, 44, 46, 47, 48, 49, 50, 51},
{ 30, 18, 26, 9, 19, 15, 16, 17, 55, 56, 57, 58, 59, 60},
{ 29, 31, 32, 33, 20, 21, 23, 22, 54, 62, 64, 65, 66, 63},
{ 34, 35, 27, 25, 67, 68, 69, 70, 71, 61, 53, 45, 42, 43},
},
{
{ 0, 16},{ 0, 0},{ 15, 0},{ 30, 0},{ 45, 0},{ 60, 0},{ 75, 0},{ 90, 0},
{ 20, 16},{ 42, 32},
{ 45, 16},{ 50, 16},{ 65, 16},{ 80, 16},{ 95, 16},{ 70, 32},{ 84, 32},{ 98, 32},
{ 14, 32},{ 56, 32},{ 65, 48},{ 80, 48},{110, 48},{ 95, 48},{112, 64},{100, 64},
{ 42, 32},{ 38, 64},
{ 0, 32},{ 10, 48},{ 0, 48},{ 20, 48},{ 35, 48},{ 50, 48},{ 0, 64},{ 19, 64},
{105, 0},{120, 0},{135, 0},{150, 0},{165, 0},{180, 0},{202, 0},{224, 0},
{110, 16},{224, 16},
{125, 16},{140, 16},{155, 16},{172, 16},{187, 16},{202, 16},{210, 32},{224, 32},
{125, 48},{112, 32},{126, 32},{140, 32},{154, 32},{168, 32},{182, 32},{224, 48},
{140, 48},{200, 48},
{155, 48},{170, 48},{185, 48},{150, 64},{173, 64},{195, 64},{210, 64},{224, 64}
},
{
1, 1, 4, 4, 4, 4, 4, 4,
4, 4,
4, 4, 4, 4, 4, 4, 4, 4,
4, 4, 4, 4, 4, 4, 4, 4,
4, 4,
1, 1, 1, 4, 4, 4, 1, 1,
4, 4, 4, 4, 4, 4, 1, 1,
4, 1,
4, 4, 4, 4, 4, 4, 4, 1,
4, 4, 4, 4, 4, 4, 4, 1,
4, 4,
4, 4, 4, 1, 1, 1, 1, 1,
}
};
#endif
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
switch(keycode) {
#ifdef RGBLIGHT_ENABLE
case KC_F24: // switch the led mode on or off
noah_led_mode = !noah_led_mode;
return false;
#ifdef RGB_MATRIX_ENABLE
case KC_F13: // toggle rgb matrix
rgb_matrix_toggle();
return false;
case KC_F14:
rgb_matrix_step();
return false;
#endif
#endif
default:
break;
}
}
return process_record_user(keycode, record);
}