g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/handwired/splittest/promicro
History
James Young baa6000ed3
Data-Driven Keyboard Conversions: H, Part 3 (#23530) 		2024-04-17 00:36:21 +01:00
..
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
keyboard.json Data-Driven Keyboard Conversions: H, Part 3 (#23530) 2024-04-17 00:36:21 +01:00
readme.md
…

readme.md

Pro Micro splittest

To trigger keypress, short together pins B3 and B6 (marked on the PCB as 14 and 10).

Wiring

  • Add switches to both Pro Micros across B3 and B6 pins
  • Add pull-up resistor to left side between VCC and F6
  • Add pull-down resistors to right side between GND and F6
  • Connect the following pins on both sides together: D0, D1, GND, VCC
  • Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
  • Wire Di of RGB strip for each half to D3