a1c1427594
Affects: - `handwired/jn68m` - `handwired/jopr` - `handwired/jot50` - `handwired/jotanck` - `handwired/jotpad16` - `handwired/jtallbean/split_65` - `handwired/juliet` - `handwired/k_numpad17` - `handwired/kbod` - `handwired/ks63` - `handwired/leftynumpad` - `handwired/lemonpad` - `handwired/m40/5x5_macropad` - `handwired/macroboard/f401` - `handwired/macroboard/f411` - `handwired/magicforce61` - `handwired/magicforce68` - `handwired/mechboards_micropad` - `handwired/minorca` - `handwired/mutepad` - `handwired/nicekey` - `handwired/nortontechpad` - `handwired/not_so_minidox` - `handwired/novem` - `handwired/nozbe_macro` - `handwired/numpad20` - `handwired/obuwunkunubi/spaget` - `handwired/oem_ansi_fullsize` - `handwired/onekey` - `handwired/ortho5x13` - `handwired/ortho5x14` - `handwired/p65rgb` - `handwired/pilcrow` - `handwired/polly40` - `handwired/postageboard/mini` - `handwired/postageboard/r1` - `handwired/prime_exl` - `handwired/prime_exl_plus` |
||
|---|---|---|
| .. | ||
| keymaps | ||
| keyboard.json | ||
| readme.md | ||
readme.md
NortonTechPad
The NortonTechPad is a numpad inspired by the SiCK-Pad,it is also 3D printed and designed to be inexpensive.
- Keyboard Maintainer: NortonTech
- Hardware Supported: Pro Micro
Make example for this keyboard (after setting up your build environment):
make handwired/nortontechpad:default
Flashing example for this keyboard:
make handwired/nortontechpad:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear EEPROM, so it is a good first step if the keyboard is misbehaving.
- Physical reset button: Short the GND and RST pins on the Pro Micro with something conductive.
- Keycode in layout: There is no key mapped to
QK_BOOTin the pre-created keymaps, but you may assign this key in any keymaps you create.