g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/converter/xt_usb
History
Ryan d09a06a1b3
Update GPIO API usage in keyboard code (#23361) 		2024-05-03 15:21:29 +10:00
..
keymaps/default Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
config.h Update GPIO API usage in keyboard code (#23361) 2024-05-03 15:21:29 +10:00
keyboard.json Migrate build target markers to keyboard.json - E (#23529) 2024-04-16 02:16:08 +01:00
matrix.c Remove matrix_init_quantum/matrix_scan_quantum (#19806) 2023-02-11 03:47:17 +00:00
readme.md Rename keyboard-level readmes to lower-case (#10759) 2020-10-25 15:23:42 +00:00
rules.mk Data-driven Keyboard Conversions: C (#23453) 2024-04-11 16:29:10 +01:00
xt.h Update GPIO API usage in keyboard code (#23361) 2024-05-03 15:21:29 +10:00
xt_interrupt.c Move converter specific tmk_core protocols (#14743) 2021-10-07 23:14:26 +01:00

readme.md

XT to USB keyboard converter

This is a port of TMK's converter/xt_usb to QMK.

This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)

Connect Wires

  1. Connect Vcc and GND.
  2. Connect Clock and Data line. Clock is on PD1, Data on PD0 by default. And optionally you can use PB7 for Reset.(Compatible to Soarer's converter) To change pin configuration edit config.h.
  3. You need pull-up resistor. 1K-10K Ohm will be OK.

XT keyboard protocol resource

https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol